User Manual (English)
Table of Contents General Safety Information...........................................................................................3 Warning - Volume Levels: Always Protect Your Hearing..........................................4 About Bluetooth® Technology......................................................................................5 Headset Components..................................................................................................6 Mic Alignment.................................
Table of Contents Technical Specifications.............................................................................................18 Care and Maintenance..............................................................................................19 Battery Information......................................................................................................20 Callpod® Limited Warranty..........................................................................................21 Exclusions.....
General Safety Information FOR THE SAFE AND SUCCESSFUL OPERATION AND USE OF THIS PRODUCT, PLEASE READ AND FOLLOW THE INFORMATION CONTAINED IN THIS USER MANUAL BEFORE USE. Do not open the Onyx headset as contents may cause electric shock. Only use approved Callpod® - branded accessories and components as well as specified compatible electronic devices to ensure proper operation. Please use the Onyx headset responsibly while traveling. callpod ® Copyright © 2009.
WARNING - Volume Levels: Always Protect Your Hearing The successive and long-term use of any headset or speakers at high volumes can potentially affect a user’s hearing capacity. This can result in Noise Induced Hearing Loss (“NIHL”). NIHL may occur if a headset is used at maximum or high volumes for more than five (5) minutes per day and if medium volumes are used for more than one (1) hour per day. The human ear will typically adapt to a constant volume level set on a headset speaker.
About Bluetooth® Technology ® Bluetooth technology allows devices to communicate without wires over a short range. The Onyx ® is compliant with Bluetooth Specification 2.0, which supports the Headset Profile 1.1 and Handsfree Profile 1.5. ® To learn more about Bluetooth and the applications of the technology, please visit, www.bluetooth.com Bluetooth is a registered trademark of Bluetooth SIG, Inc. callpod ® Copyright © 2009.
Headset Components a b c d e f g Power & volume control button Dual microphones Multifunction button Red & ice blue LED Charging port Ear bud Speaker c b e a callpod g f d ® Copyright © 2009.
Mic Alignment The Onyx uses advanced Dual-mic Noise Suppression™ that is always “ON.” In order for the headset to function properly, the two microphones must be positioned towards your mouth. This is easy to do. Once the headset is put on your ear, simply rotate the headset towards your mouth until the ear bud is compressed comfortably against your ear. The microphones will align automatically towards your mouth as shown below: 30° callpod ® Copyright © 2009.
Charging Before using your Callpod® Onyx headset, you must fully charge the headset. Charge the Onyx using the included wall adapter, car charger (sold separately), USB cable or with the Chargepod® (sold separately). The Onyx is powered by an internal lithium-ion rechargeable battery. Please do not attempt to remove the battery from the case, as damage will occur to the headset and void your warranty. The red indicator light will turn on during charging.
Charging The charging components that are included with the Onyx allow you to charge via USB port on your computer, AC/DC wall adapter or car charger (sold separately). computer AC/DC wall adapter car charger callpod ® Copyright © 2009.
Turning the Headset On and Off To turn the headset on, press the power & volume control button until the red LED illuminates. The headset will play an ascending tone and the LED will flash red and ice blue indicating that it is ready to pair. To turn the headset off, press and hold the power & volume control button until the red LED turns off. The headset will play a descending tone and then shut off. power & volume control button callpod ® Copyright © 2009.
Pairing the Headset & Auto Pairing When the Onyx is powered on, it will first attempt to reconnect to the last phone used (if any). If the phone is out of range or not available, the Onyx will automatically enter a discoverable state. You have 100 seconds to pair the Onyx to your cell phone or PC before it enters a low power sleep mode. If the headset is not paired within 100 seconds, simply push the power & volume control button and it will enter discoverable mode for another 100 seconds.
Pairing and Disconnecting the Headset Pairing a second device. Onyx supports real time switching between two connected devices. If you are currently connected to a phone, in order to pair another device you will have to put your Onyx in discoverable mode. To do this, simply push the power & volume control button once. The ice blue and red LEDs will flash and you may now begin pairing the Onyx to your second device. Switching between devices.
Reconnecting the Headset When powered on, the Onyx headset will automatically reconnect to the last connected phone. If the headset is on but not connected to any devices, pressing the multifunction button will establish a connection to the last connected phone. You may have to re-establish the connection from the Bluetooth® menu on your phone or computer. If you encounter problems reconnecting: • Ensure your phone or Computer’s Bluetooth® functionality is enabled.
Operation Adjusting the ear wrap. The ear wrap is fully adjustable in that it can slide up or down, left or right as well as rotate 180 degrees to fit most ear sizes on both the left or right ear. To adjust the headset for a comfortable fit, simply slide the ear wrap up or down and position the body of the headset so that the ear bud fits comfortably in your ear (as shown below). Alignment. The two microphone holes on the headset should make a line that points to your mouth when the Onyx is in use.
Operation Placing a call with voice dialing (if supported by phone). With no call present, press the multifunction button and speak the name of the person you want to call. For the best results, record the voice tags for voice dialing using the Onyx headset. Answering/Ending a call. When the headset rings, press the multifunction button to accept an incoming call. If a call is already present, the first call will be placed on hold. The calls can then be swapped by pressing the multifunction button.
Advanced Features Conference calling. While on a call with a call on hold, tap the power & volume control button to join the two calls in a conference. Press and hold the multifunction button to hang up the conference call. Connecting to a phone and computer (or two phones) simultaneously The Onyx headset can store pairing information with eight devices without having to re-pair. Two of those devices may be connected simultaneously to the headset.
Walkie-Talkie 2-Way Communications Connecting Two Callpod® Headsets Together (2-way Communication Mode) If you have two Callpod Bluetooth headsets, you can communicate headsetto-headset in full duplex up to of 84,000 sq. ft. [7,800 sq. meters] area (in open spaces). To connect two headsets together: 1. Make sure Headset A is in a discoverable state (flashing red and ice blue LED) 2. Power off Headset B 3. Power on Headset B while holding the multifunction button. The ice blue LED will flash repeatedly.
Technical Specifications Connectivity Bluetooth® 2.0/AFH Profile Support Hands-free & Headset Frequency Band 2.4 - 2.4835 GHz RF Output Class 1 Working Range <50m [164 ft.] Input Power 3.7 VDC Built-in Lithium-ion Battery 5VDC (via USB port for charging) Operating Temperature 0° C to 50° C Operating Time <5 hours talk time & <120 hours of standby Dimensions 0.96” W [24.38mm] × 2.17” L [54.86mm] × 0.63” H [16mm] Weight callpod 0.3oz [8.51g] ® Copyright © 2009.
Care and Maintenance • Please keep the headset and all accessories out of the reach of small children. • Do not to use other manufacturer’s power supplies or adapters with the headset. • Do not attempt to open the outer casing of the headset. • Do not clean the headset with harsh chemicals, and keep it away from liquids. • Do not expose the headset to extreme temperatures.
Battery Information A rechargeable lithium-ion battery powers the Onyx headset. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. To charge the Onyx headset, use only Callpod® designated power supplies and adapters. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, as overcharging may shorten the lifetime of the internal battery. Never use a damaged charger.
Callpod Limited Warranty Subject to the exclusions contained below, Callpod, Inc. warrants Callpod®branded products to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited one-year warranty is a consumer’s exclusive remedy and applies as follows to new Callpod products and accessories purchased by consumers. This warranty is limited to one-year from the time of purchase by the original consumer (i.e. first purchase date).
Callpod Limited Warranty Use of Non-Callpod Products and Accessories. Defects or damage that result from the use of non-Callpod-branded or certified products, accessories, software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification.
Callpod Limited Warranty Who is Covered? This warranty extends only to the first consumer purchaser and is not transferable. What Will Callpod® Do? Under this warranty, Callpod, at its sole discretion, will at no charge either repair, replace or refund the purchase price of any covered product, accessory or software. We may use functionally equivalent reconditioned/refurbished/preowned or new products, accessories or parts. For additional information, please visit us at: www.callpod.
Callpod Limited Warranty You will receive instructions on how to ship any products or accessories at your expense, to a Callpod® authorized repair center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility if applicable and (e) your mailing address and telephone number.
Callpod Limited Warranty What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Export Law Assurances This product is controlled under the export regulations of the United States of America. The Government of the United States of America may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce and International Trade Commission. Approved Accessories It is critical to use Callpod®-branded adapters and power supplies only.
Notice to International Users Prior to traveling outside of the United States of America, please make sure to have a compatible plug adapter to use internationally. For a list of universal outlet adapters for recommendation and purchase, please visit us at: www.callpod.com Copyright Notice All Callpod® products and information shared in this manual are protected by copyright.
Product Registration Register products online at: www.callpod.com/product/registration or by phone: 1-800-951-CPOD Product registration is an important step towards enjoying your new Callpod® product. Registering helps us facilitate warranty service and permits us to contact you should your product require an update or other service. Registration is not required for warranty coverage. Your serial number can be found on the inside of the back cover of this manual.
Certification The Onyx is certified by UL, CE, FCC, PSE and Bluetooth® for safety and reliability. Unauthorized changes or modifications to this device may impair your ability to operate this device and will void the warranty. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
