813G-1 Indoor GPON HGU Version 1.0 Date 2015.08.
Model List: Product WiFi Product Description Name POTS USB 2.4 UPS 813G-1 Service Gateway 813G-1 2 1 1 1 1. How to Use the Devices? The device can be used in two types: Standing type and Wall mount type: a) Standing type (Vertically stand as below) b) Wall mount type (LED up and Cables down) 2.
a.Use a Gigabit Ethernet Cable to connect a computer to an ETHERNET port for initial configuration and/or internet connection. b. Use the provided UPS source to the POWER Socket. c. Connect the USB dongle to the USB port if USB wants to be used. Model: 813G-1 (Refer to the Pic.) Connectors order top down LED order top down Reset POWER FXS 1 BROADBAND FXS 2 SERVICE Ethernet 1 WiFi 2.
Step2: After Log into the Web GUI, click Quick Start, then configure the device for Internet Connection and Wireless connection. Click Here Step 3: Click Connect to Internet, Configure the Connection Type and DNS that ISP assigned. Step 4: Click Configure Wireless Network, Enable the wireless and configure the SSID as you like, the wireless WPA/WPA2 password will be generated automatically.
Certifications Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operations. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery. Article 14 The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists.
. Make sure to connect the cables to the correct ports. . Place connecting cables carefully so that no one will step on them or stumble over them. . Always disconnect all cables from this device before servicing or disassembling. . Use ONLY an appropriate power adaptor or cord for your device. . Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). .
Environment Operating Temperature Range: 0-40℃ Storage Temperature Range: -25-55℃ Humidity Range: 10%-95% Altitude Range (Feet/Meters) : 61 m (200ft) below sea level and 3048 m (10,000ft) above sea level
