INSTRUCTION MANUAL RCD 801 CD/USB/SD PLAYER WITH RDS EON FM/AM TUNER
LOCATION OF CONTROLS PANEL RELEASE BUTTON POWER BUTTON PTY BUTTON ENCODER VOLUME KNOB CD PAUSE BUTTON CD SLOT TA BUTTON CD SCAN BUTTON PRESET MEMORY BUTTONS (M1-M6) AF BUTTON DISPLAY/ ID3 TAG INFORMATION BUTTON CD REPEAT BUTTON FUNCTION SELECT BUTTON E-1 CD SHUFFLE BUTTON MODE BUTTON AMS/MP3 MENU BUTTON MUTE BUTTON BAND/ LOUDNESS/ MP3 ENTER BUTTON DIRECTORY UP/ DOWN EJECT BUTTON DSP BUTTON TUNING / SEEK / TRACK / MP3 FILES SEARCH UP/DOWN BUTTON
HANDLING COMPACT DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs NOTES ON DISCS 1. A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. Handle the disc by its edge.
INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. Note: the mounting box, outer trim ring,and half-sleeve are not used for this installation. Screw Factory radio mounting bracket Note: The mounting box, metal half sleeve, hook & screws are not included in the packnig. Hook Screw Hook Dashboard or console DETACHABLE CONTROL PANEL (D.C.P.) Removing The Detachable Control Panel (D.C.P.). 1.
ELECTRICAL CONNECTION a. Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a converter will be necessary). b. Before starting wiring connections, disconnect the power supply by removing the fuse from the fuse box. c. Connect the power wire to one of the extra terminals of the fuse box. d. Connect the black ground wire to a metal part of the car. It is important to make good contact. e. Make other wiring connections as shown. f.
AUDIO OPERATIONS ENCODER VOLUME KNOB Turn this knob to adjust desired volume level. FUNCTION SELECT BUTTON Press this button to select desired audio function. ORDER OF FUNCTION: VOLUME(VOL) -> BASS(BAS) -> TREBLE(TRE) ->BALANCE(BAL) ->FADER(FAD) While the selected function is displayed, turn Volume Knob to adjust the level within 5 seconds, otherwise the unit will return to volume adjustment mode. MUTE BUTTON Press this button to mute the sound. Press it again to resume listening.
AUTO MEMORY STORE/PRESET SCAN BUTTON (AMS) 1.PRESET SCAN: Press AMS button briefly enter Preset Scan mode, it will scan all the preset stations in the memories, you can hear that will stay on each station for about 5 seconds. 2.AUTO MEMORY STORE: Press AMS button long to enter Auto Store mode, this feature will automatically scan the current band and enter up to 6 strongest stations into the 6 preset memories. To stop Auto Store & Scan, press the AMS button again. STATION PRESET BUTTONS (M1-M6) 1.
RDS OPERATIONS AF BUTTON Press this button briefly to switch on or off the AF follow mode, the state of the AF follow mode will be indicated on the LCD by the "AF" icon: Icon Off : AF follow mode off Icon On : AF follow mode on and RDS reception OK Icon Flashing : AF follow mode selected, but no RDS data received When AF follow mode is on, the radio will from time to time measure the signal strength of the alternative frequencies that come with the RDS data.
RDS OPERATIONS OVERVIEW OF THE RDS FUNCTION Radio Data System (RDS) is a broadcasting service that allows FM stations to send additional digital information along with the regular radio program signal. Your car stereo offers you a variety of services. Here are just a few: - PI (Program identification) It is a code that identified RDS stations; it is unique for each station. - PS (PROGRAM Service Name) The name of current station, it is shown on the display.
PROGRAMMABLE OPTIONALS To use this function keep press long SEL Button for few seconds, each time you press this button the mode will move and the functions will shown on the display, turn the encoder volume knob up/ down to set the desires functions ,the function states as following: - TA SEEK, TA ALARM To determine what action will the radio take if the newly tuned station does not receive TP information for 5 seconds. TA SEEK The radio retunes to a different station which contains TP information.
MMC/SD CARD & USB DEVICE OPERATIONS START THE USB DEVICE MODE 1.The USB socket is accessible as indicated in picture 1.(P.1) P.1 USB SOCKET 2.Plug in the USB drive / device completely as indicated in picture 2(P.2) and display will show “USB PLAY” to indicate that the USB drive / device is being plugged in correctly & the download has begun. 3.
START THE SD/MMC MODE P.4 1.Press panel release button to release the front panel.(P.4) 2.The SD/MMC card slot is located on top of the front panel as indicated in (P.5). 3. Insert the SD/MMC card into the card slot in the correct direction until a “CLICK” sound is heard. P.5 4.Close the front panel. 5. The display will show “SD PLAY” to indicate that the SD or MMC card is correctly inserted. Once the SD or MMC card is inserted, the MP3 file will automatically loaded & playback will also start. 6.
MP3 OPERATIONS Notes : - An MP3 directory is shown in this manual as “Directory”, and an MP3 file is shown as “Track”. - Maximum length of file name : 28 characters. - Maximum length of directory : 16 characters. - Maximum number of tracks per disc : 254. - Maximum number of directories per disc : 128. - Sampling Frequencies support : 32KHz, 44 KHz, 48KHz. - Bit Rates support : 64 - 320KHz including VBR. - Supports Multi-Session recording. - Supports CD, CDR and CDRW.
ID3 TAG Press DISPLAY button repeatedly to Display ID3 TAG information.
SPECIFICATIONS CD PLAYER System Usable disc Sampling frequency No of quantization bits Frequency Number of channels S/N Ration Compact disc audio system Compact disc, CD-R, CD-RW (AUDIO/MP3 format) 44.1KHz 1bit 5-20,000Hz 2 stereo 70dB RADIO SECTION FM Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio 87.5 - 108 MHz 10.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom No power Disc cannot be loaded or ejected Cause Solution The car ignition is not on. If the power supply is properly connected to the car accessory terminal, switch the ignition key to “ACC” The fuse is blown. Replace the fuse. Presence of CD disc inside the player.
W W W. C A L I B E R . N L CALIBER HEAD OFFICE • The Netherlands • Fax: +31 (0)416 69 90 01 • E-mail: info@caliber.