Technical Information Manual Revision n. 2 18 December 2006 Mod. A828US OEM UHF COMPACT READER (FCC PART 15) NPO: 00107/05:828US.
Document type: User's Manual (MUT) Title: Mod. A828US OEM UHF compact reader Revision date: 18/12/2006 Revision: 2 INDEX 1. INTRODUCTION ................................................................................................................................................3 2. MOD. A828US TECHNICAL SPECIFICATIONS ..........................................................................................4 2.1. MOD. A828US TECHNICAL SPECIFICATIONS TABLE..........................................
Document type: User's Manual (MUT) Title: Mod. A828US OEM UHF compact reader Revision date: 18/12/2006 Revision: 2 1. Introduction The A828US OEM UHF compact reader (FCC part 15), is a CAEN multi protocol OEM compact module for integration into barcode printers, printer applicators, handheld computers and PDAs, devices requiring UHF tag programming and reading. The A828US is fully compliant to the US telecommunication regulation FCC part 15 (902928 MHz).
Document type: User's Manual (MUT) Title: Mod. A828US OEM UHF compact reader Revision date: 18/12/2006 Revision: 2 2. Mod. A828US Technical Specifications 2.1. Mod. A828US Technical Specifications Table Table 2.1: Mod. A828US Technical Specifications 37 x 60 x 6.6 mm3 Dimensions (1.46 x 2,36 x 0.26 inches3) 180 mA @ 5 V (TX/RX mode) Electrical Power 80 mA @ 5 V (idle mode) 200 µA @ 5 V (stby mode) Operating Temperature -20 °C to 60 °C Frequency 912.500÷917.
Revision date: 18/12/2006 Revision: 2 Molex Connector Title: Mod. A828US OEM UHF compact reader Antenna Document type: User's Manual (MUT) Fig. 2.1: Mod. A828US technical drawings 2.2.1. MOLEX Connector Specifications The compact reader A828US external connector is a SMD, 12 poles, 1.27 connector whose pinout is shown in table below. pitch Table 2.2: MOLEX Connector electrical specifications NPO: 00107/05:828US.MUTx/02 Pin Function Direction Duration (min.
Document type: User's Manual (MUT) Title: Mod. A828US OEM UHF compact reader Revision date: 18/12/2006 Revision: 2 The GPIO0-GPIO4 pin are 5 general purpose bidirectional pins, their default direction (or after a Reset) is Out; GPIO4 works also as Identify Tag signal. the Wakeup pin (active low) must be used when the A828US board is put into power down mode.