USB Bluetooth Adapter User Guide UBTB2 CADMUS MICRO, INC. 1840 Carlos Ave. Ontario, CA 91761.
Index: Setup for Windows 98SE/2000/ME/XP Setup for Mac Setup for Windows 98SE/2000/ME/XP Installing Bluetooth software for Windows IMPORTANT: You must install the software before installing the Bluetooth device. During the software installation, you will be prompted to install the device. (1) Place installation CD into PC and the setup menu should launch automatically. If the setup menu does not launch automatically, use Windows Explorer to navigate to the appropriate CD-ROM drive and run "bsetup".
(3) Please select your device from the menu. (4) Complete the following steps to install Bluetooth software: (a) Exit all applications. (b) InstallShield Wizard setup dialog box will automatically be displayed. (c) Follow the instructions on screen: (d) On the Welcome screen, click the “Next“ button. (e) When the License Agreement screen is displayed, read the License Agreement, then click the radio button to the left of "I accept the terms in the license agreement" and click the “Next“ button.
(g) The system is ready to install the Bluetooth software. If you need to review or change any settings, click the "Back" button. Click the "Cancel" button to exit the Wizard. Otherwise, click the "Install" button. (h) For Windows 2000/XP users, system will popup a "Driver Signature Notice", please click the "OK" button. (i) During the installation, system will try to detect your Bluetooth device, please plug in your Bluetooth device when the following message is displayed.
Mac O.S. 10.2.x has build-in Bluetooth software for USB Bluetooth adapters, therefore no additional Bluetooth software is required. Simply plug in the USB Bluetooth adapter and a Bluetooth icon will appear in the System folder. Open the Bluetooth applet to configure the Bluetooth functions on your Mac system. FCC Caution FCC RF Radiation Exposure Statement: (1)The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.