CADI SmartSense SmartTAG STG-875W User Manual
CONFIDENTIAL Contents 1 2 3 4 5 6 Introduction .................................................................................................................................................. 1 Application.................................................................................................................................................... 1 Specifications .........................................................................................................................................
CONFIDENTIAL PRECAUTIONS • • • • • • • Keep batteries away from children. Do not swallow batteries. Do not throw batteries into water. Do not throw batteries into fire. Do not short-circuit batteries. Battery must be fit into tag in correct orientation. Do not replace battery with incorrect type. Incorrect type of battery replacement may cause risk of exposure.
CONFIDENTIAL 1 Introduction The STG-875W is a battery powered WiFi personnel location tracking tag. Location tracking is achieved using a combination of technologies based on low frequency (LF), infrared (IR), and WiFi signals that results in robust performance even in challenging environments. When the STG-875W passes by a LF exciter (typically installed at key chokepoints or egress points) it will receive a location ID transmitted by the exciter.
CONFIDENTIAL 3 Specifications S/N Feature 1 Physical 2 3 4 Description Dimension 36mm x 42mm x 14mm Weight 28g Rechargeable Yes User replaceable No Battery type 3.7V 300mAh Li polymer Power Operating Environment Temperature 0oC to 45oC (during normal operation) 0oC to 35oC (during charging) Humidity 0 – 95% RH non-condensing RF Specifications Frequency 5 LF Specifications Frequency 6 IR Receiver Specifications 7 Frequency Location-Update Update rate 9 2.
CONFIDENTIAL 4 Charging the STG-875W The STG-875W can be charged using the CGS-STG-875W multiple-tag charger. During charging the Red LED will light up as shown below. When the tag is fully charged the Green LED will light up as shown below.
CONFIDENTIAL 5 Tag Cleaning Instructions - Disinfect the tags by wiping with an alcohol sanitizer. - Dry the tag with a clean cloth. Caution: The tag is not designed for autoclave sterilization.