CADI SmartSense SmartTag STG-873W User Manual
CONFIDENTIAL Contents 1 2 3 4 5 6 7 Introduction ................................................................................................................................................10 Application and Mounting Options ............................................................................................................10 Specifications ..............................................................................................................................................
CONFIDENTIAL Regulatory Information For customers in U.S.A and Canada Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
CONFIDENTIAL For customers in Europe This equipment has been tested and found to comply with the limits set out in the R&TTE Directive. Where you see this symbol on any of our electrical products or packaging in Europe, it means that at end of life the product or battery must be disposed of in accordance with any applicable laws or requirements for the separate disposal of electrical equipment or batteries. PRECAUTIONS • • • • • • • Keep batteries away from children. Do not swallow batteries.
CONFIDENTIAL 1 Introduction The STG-873W is a battery powered location tracking tag. Location tracking is achieved using a combination of technologies based on low frequency (LF), infrared (IR), and WiFi signals that give robust performance even in challenging environments. The tag is designed to allow for use in hospital wide location tracking of assets, in-patients, and staff.
CONFIDENTIAL 2.2 For staff The tag can be conveniently worn by a staff using a badge clip accessory. 2.3 For assets The tag can be securely mounted to different asset types using a bracket accessory.
CONFIDENTIAL 3 Specifications S/N 1 2 3 4 Feature Physical Dimension 31mm x 45.4mm x 18.6mm Weight 26g Rechargeable No User replaceable Yes Battery type 3.6V 1/2AA LiSOCl2 Power Operating Environment Temperature 0oC to 50oC Humidity 0 – 95% RH non-condensing RF Specifications Frequency 5 9 38kHz (receive only) Location-Update/Beacon Update rate 8 125kHz (receive only) IR Receiver Specifications Frequency 7 2.
CONFIDENTIAL 4 5 Battery change instruction - Un-screw the 4 cross-head screws located at the rear of the tag. - Remove the rear cover - Unplug the 1/2AA LiSOCl2 battery - Replace with fresh 1/2AA LiSOCl2 battery Tag Cleaning Instructions - Disinfect the tags by wiping with an alcohol sanitizer. - Dry the tag with a clean cloth. Caution: The tag cannot withstand autoclave sterilization. It may cause tag damage. Caution: The tag has ingress protection rating of 65 (IP65).
CONFIDENTIAL 6 Battery Status Indicator Red LED will blink every 10 seconds when battery level is low The tag will blink its red LED every 10 seconds when its battery level is low. Further, if the battery level is too low, the tag might restart and output a beeping sound.
CONFIDENTIAL 7 Buttons When button is pressed the STG-873W tag will transmit a WiFi signal to indicate button pressed event. Two different button-press events are supported by STG-873W, namely: Short (momentary) Button Press When button is pressed and released immediately, the STG-873W will transmit a WiFi signal indicating a ‘short button press’ event.