SMN-800/900 SmartNODETM RFID Receiver User Guide
Cadi Scientific Pte Ltd Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Cadi Scientific Pte Ltd Introduction The SMN-800/900 SmartNODETM RFID Receiver is an integral component of the SmartSense Wireless Vital Signs and Location Tracking System. The system is designed for wireless and automated measurement and recording of patient vital signs and for location tracking of patients and high-value assets. The SMN-800/900 SmartNODETM RFID Receiver is a LAN-enabled receiver for receiving data transmitted by the SmartSenseTM series of wireless sensors and monitors.
Cadi Scientific Pte Ltd Typical System Setup The following diagram shows how SMN-800/900 is deployed in a typical SmartSense System configuration.
Cadi Scientific Pte Ltd Specifications TECHNICAL DATA Interfaces Ethernet LAN 10 Base-T RF RF Frequency Input connector US (SMN-9xx): Europe (SMN-8xx): US (SMN-9xx): Europe (SMN-8xx): Input impedance 50ohm Power source Current consumption 5-6VDC 250mA (typical) 919.8MHz or 925MHz 868.