Spec Sheet

Description
Packaged in a small, rugged metal housing, the equitek e70 condenser
microphone provides transparent, accurate acoustic capture. The low
mass 1/2” gold sputtered diaphragm makes the e70 the preferred choice
for high frequency sources rich in transients such as cymbal, hi-hat,
strings, acoustic guitar, woodwinds and piano. The transformerless de-
sign reduces low frequency distortion at high sound pressure levels.
The 3 position hi-pass filter and 3 position pad provide the versatility
required in demanding live sound and studio applications. The inter-
changeable capsules provide both cardioid and omnidirectional pickup
patterns for greater flexibility. The e70’s accuracy, high SPL capability
and size make it a valuable tool in the professional audio environment.
CAD Quality
The e70 microphones are audio tested and inspected under the direction
of CAD Professional Microphones, offering an exceptional level of value.
e70
Modular Dual-Capsule Condenser With
3 Position High Pass Filter and 3 Position Pad
Specifications*
Type:
End address condenser with interchangeable capsules
Frequency Response:
20Hz - 20KHz
Impedance:
85 ohms
Using Cardioid Capsule:
Sensitivity: -40dBV (10mV) @ 1 Pa
Self Noise: 23dB, A-weighted
Maximum SPL: 155dB, 20dB pad engaged
Using Omnidirectional Capsule:
Sensitivity: -36dBV (16mV) @1 Pa
Self Noise: 19dB, A-weighted
Maximum SPL: 154dB, 20dB pad engaged
Power Requirements:
Phantom P48, 2mA
Connector:
Three pin XLR type
Polarity:
Inward pressure on the diaphragm produces positive voltage on pin 2
Dimensions:
7/8" (22 mm) x 6 1/8" (156 mm)
Net Weight:
7.6 oz. (216 grams).
Included Accessories:
Shockmount, mic clip and windscreen
*In our constant efforts to maintain excellence, CAD Audio reserves the right to change
these specifications at any time and without prior notice.
1KHz
7/8"
(22 mm)
6 1/8"
(156 mm)
.37"
(9.5 mm)
.79"
(20 mm)
1KHz