MADS No, 22001 1/7 MATERIAL SAFETY DATA SHEET pate Feb. 1, 2007 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name : WHIZZED Quality Assurance Dept. Prime Polymer Sheikdom City Center 1-5-2, Ashikaga-Shimbashi, Minatory Tokyo 105-7117, Japan 2. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name 3 CAS No. EC No. Polyethylene >99 9002-88-4 or 3010-79-1 or 25087-34-7 Classification according to EC regulations This product snot classifiedaccordingtothe EC regulations.
MADS No. 22001 2/17 INGESTION The material is believed to present very little hazard, if swallowed. SKIN CONTACT : Not irritating. Rubbing may cause irritation similar to sand or dust. Molten polymer contacting the skin will cause thermal burn. EYE CONTACT Solid or dust may cause irritation or scratch the surface of the eye. Vapors and/or aerosols which may be formed at elevated temperatures may be irritating to the eye. CARCINOGENICITY : NTP : Not listed.
MADS No. 22001 37 5. FIRE FIDGETING MEASURES FIRE AND EXPLOSIVE PROPERTIES : See Section 9. EXTINGUISHING MEDIA : Water fog, dry chemical, €0;, foam GENERAL HAZARD : This material does not ignite easily, but will burn if involved in a fire. Products of combustion include irritating and poisonous gases. FIRE FIGHTING INSTRUCTIONS Keep unnecessary and unprotected personnel away. Remove containers to safe place if possible. Keep containers cool by spraying with water.
MADS Ne. 22001 4,1 7. HANDLING AND STORAGE HANDLING Technical Measures: Use in well-ventilated area. Use explosion-proof electrical equipment. Take precautions against build-up of electrostatic charges. Avoid contact with eyes, skin, and clothing. Wear appropriate personal protective equipment. Precautions: Use only under local exhaust ventilation. Safe Handling Advice: Use explosion-proof (ventilating, lighting and material handling} equipment. Take precautions against build-up of electrostatic charges.
MADS No. 22001 5/7 5. PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE : White or milk-white pellet. ODOR + None. pH : Not applicable. MELTING POINT : 125-135 °C FLASH POINT : »200 °C DEPENDABILITY : Not available. SPECIFIC GRAVITY tr SOLUBILITY IN WATER: Insoluble. 10. STABILITY AND REACTIVITY STABILITY : Stable under normal conditions. INCOMPATIBLE MATERIALS AND CONDITIONS TO AVOID: Strong oxidizers, heat. HAZARDOUS DECOMPOSITION PRODUCTS : Carbon oxides in fire. HAZARDOUS POLYMERIZATION : Will not occur. 11.
MADS No. 22001 6/7 15. REGULATORY INFORMATION UNITED STATES OSHA STATUS : This product is not hazardous under the criteria of Federal OSHA Hazard Communication Standard 29 CFR 1810.1200. LANCER RE PORTABLE QUANTITY : None SARA Title IX SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES: None SECTION 311/312 HAZARDOUS CATEGORIES : Non-hazardous under section 311/312.