Model 103091 Extend HDMI audio and video connections up to 100M/328FT Utilize existing Cat 6 wiring for an easy installation Add up to 8 receivers with a dedicated unmanaged network switch User Manual • Download the user manual at: www.cablematters.com/dl/103091 support@cablematters.
Table of Contents 1. INTRODUCTION……………………………………...1 1.1 Introduction 1.2 Copyright and Trademarks 1.3 FCC Compliance Statement 2. PRODUCT OVERVIEW 2.1 Package Contents…………………………………………...1 2.2 Product Description………………………………………… 2 2.3 Product Features 3. CONNECTION INSTRUCTIONS 3.1 Installation Checklist……………………………………..….3 3.2 Transmitter Panel Connections…………………………….4 3.3 Receiver Panel Connections 3.4 Connection Instructions……………………………………..5 3.5 Connecting Additional Receivers 3.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 1. INTRODUCTION 1.1 Introduction Thank you for your purchase from Cable Matters® Inc., the ‘Reliable Connectivity’ company. This User Manual provides an overview of the features and installation of your new A/V Extender over Cat6 with TCP/IP Configuration and IR Control Please read these instructions carefully before connecting, operating or configuring this product. Please keep this manual for future reference. Contact support@cablematters.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 2.2 Product Description The Cable Matters® A/V Extender over Cat6 with TCP/IP Configuration and IR Control is the ideal solution for connecting HD display equipment in remote locations up 328 feet apart. Broadcast HDMI audio and video signals to up to 8 displays through a dedicated unmanaged (not shared) network switch. 2.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 3. CONNECTION INSTRUCTIONS 3.1 Installation Checklist Please review the installation checklist before installing the A/V Extender over Cat6. Test an active configuration with the included HDMI cables before installing permanently. Sections 3.2 and 3.3 provide a description of the external connections to the A/V Extender Transmitter and Receivers. Section 3.6 provides Troubleshooting notes.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 3.2 Transmitter Panel Connections 1. Video OUT : Connect HDMI display mirror the output of the remote displays 2. Video IN: Connect to HDMI video source 3. Reset: Restart the Transmitter with default settings 4. CAT OUT: RJ45 port for Cat 6 cable 5. IR-T: 3.5mm port for IR blaster cord 6. Link LED: Connect a Cat 6 cable. Blue LED Link status indicator verifies a live connection 7. Power LED: Blue when powered 8. DC/5V: AC power adapter port.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 3.4 Connection Instructions 1. Power off the source equipment and destination displays before connecting any cabling. 2. Connect the power adapter to the Transmitter and Receiver. 3. Connect an HDMI cable from the ‘Video IN’ female port on the Transmitter to the video source female port . 4. (Optional) Connect an HDMI cable from the ‘HDMI OUT’ female port on the Transmitter to a HDMI display female port. 5.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 8. Plug the power adapters of the Transmitter and Receiver into an AC outlet (look for a blue LED) 9. Turn on the power to the source equipment and connected display and wait a few seconds for the signal to synchronize. Check that the blue LED is lit. NOTE: • Refer to the user manual of your monitor, TV, or projector for changing the resolution and sound input settings and verifying that audio is supported.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 3.6 Troubleshooting Notes Please review the following notes if you have any problems connecting the Transmitter and Receivers of the A/V Extender, HDMI equipment, or cabling. • Check that the Transmitter and Receivers of the A/V Extender, and the connected equipment have power. The blue LED power indicators should be lit on both Transmitter and Receivers boxes. • Check that the correct video input is selected on the output displays.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 4. TECHNICAL SPECIFICATIONS Model 103091 Extender Connections (Transmitter and Receiver) HDMI Input 1x HDMI Female HDMI Output 2x HDMI Female IR Ports 2x 3.5mm Female Transmission 2x RJ45 female Power 2x DC 5V/1A, 5 Feet Audio/Video Compatibility HDMI Compatibility HDMI 1.4b and below HDCP Compatibility HDCP 1.4 Video Bandwidth 10.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control 5. WARRANTY AND SUPPORT 5.1 Customer Support and Contact Information Cable Matters offers lifetime technical support as an integral part of our commitment to provide industry leading solutions. Email us with any questions at support@cablematters.com. 5.2 Warranty Information This product is backed by a limited one-year warranty. The warranty covers parts and labor costs only.
A/V Extender over Cat6 with TCP/IP Configuration and IR Control View related products at www.cablematters.com Certified Premium HDMI® Cable Model 300016 150’ Snagless Cat 6 Patch Cable Model 160001 150’ Shielded Cat 6 Patch Cable Model 160012 www.cablematters.
