Receiver Box for HDMI Extender over Single Cat 6 Cable Model 103002R Compatible with the TCP/IP HDMI Extender Model130002 Add up to 8 displays with a dedicated network switch Cost-effective solution uses existing Cat 6 wiring Quick Start Guide Email: support@cablematters.
QUICK START GUIDE - MODEL 103002R Thank you for your purchase from Cable Matters. Please review this Quick Start Guide for the installation of the Receiver Box for HDMI Extender over Single CAT6 Cable This Receiver box is designed to operate with the Cable Matters HDMI Extender over Single CAT 6 Cable with IR Control (Model 103002). Contact support@cablematters.com for a PDF copy of the user manual for that model. Contact support@cablematters.com for questions or product support.
QUICK START GUIDE - MODEL 103002R The Cable Matters® Receiver Box for HDMI Extender over Single CAT 6 Cable operates with the Cable Matters HDMI Extender Transmitter (Model 103002). Connect up to 8 HD video displays with HDMI in remote locations up to 300 feet apart. Broadcast HDMI audio and video signals to multiple displays with a dedicated (not shared) network switch. WWW.CABLEMATTERS.
QUICK START GUIDE - MODEL 103002R Installation Instructions Power off the connected source and destina- tion equipment before connecting any equipment or cabling. Test the Receiver with the Transmitter box before installing permanently. Locate the Receiver within 5 feet of an electri- cal outlet for power. A dedicated (not shared) network switch is required to connect multiple Receiver boxes (up to 8 total). Use high quality HDMI cables in the shortest length necessary.
QUICK START GUIDE - MODEL 103002R Receiver Connections 1. Connect the power adapter to the Receiver and to an electrical outlet. Check that the green LED is lit. 2. Connect an HDMI cable from the ‘HDMI OUT’ female port on the Receiver box to the HDMI destination display female port. 3. Connect a Cat 6 cable from the ‘CAT 6’ port to a port on the dedicated network switch 4. Turn on the power to the source equipment and connected display and wait a few seconds for the signal to synchronize.
QUICK START GUIDE - MODEL 103002R Troubleshooting Tips Check that both Extenders and the connected equipment have power. The green LED should be lit. Check that the correct video input is selected on the display. Check the video resolution settings of the video source and output displays to verify that they are compatible. Check the audio settings from the HDTV display menu or from the system settings of the computer to verify the audio output destination.
QUICK START GUIDE - MODEL 103002R Technical Specifications: Model 103002-R Extender Connections (Receiver) Audio Video HDMI 19 pin female Transmission RJ45 female IR Control 3.5mm female Power 5V DC power input Protocol Support I/O Audio/Video Signals HDMI 1.3b, DVI 1.1, DDC Category 6 UTP/STP TCP/IP 568-B HDCP Compatibility HDCP 1.
QUICK START GUIDE - MODEL 103002R Copyright and Trademarks Specifications are subject to change without notice. Cable Matters is a registered trademark or trademark of Cable Matters® Inc. All rights reserved. All other trademarks are the property of their respective owners. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Warranty Information This product is backed by a limited one-year warranty.
