User Manual
Contact support@cablematters.com for questions
DisplayPort™ to DVI Cable
Model 102004
1) Connect the DisplayPort cable end to the DisplayPort port of the COMPUTER
2) Connect the DVI cable end to the DVI port of the DISPLAY
3) Select the DVI input setting from the menu of the connected DISPLAY
4) Adjust the computer VIDEO resolution and refresh rate from the computer
Connection Notes
• DEPRESS THE LATCH on the DisplayPort connector to avoid damage when unplugging
• Dual Mode DP++ support required from the graphics card or an active adapter is required
• DUAL MONITOR SETUP - Connect up to 2 monitors (1 cable per monitor) with AMD Eyefinity
• VIDEO RESOLUTION up to 1920x1080p @ 60Hz with DVI-D Single Link
• AUDIO IS NOT SUPPORTED BY DVI and must be transmitted separately
• NOT BI-DIRECTIONAL cable converts the signal only from DisplayPort to DVI
• NOT USB COMPATIBLE with DisplayPort plug that does not fit the USB port of a computer
• HDCP SUPPORT for viewing copy protected video with HDCP compliant equipment
• DUST CAPS protect the connectors on the cable when traveling