Getting Started Tips

ManualsBrandsCaavo W4RC ManualsElectronicsRemote Controller

Caavo  Accessories  General

Getting Started Tips and Tricks

May 23, 2018 12:49

by Boone

Getting Started

This guide is here to help you get started with Control Center. If you have any questions, you can

contact Caavo support at support.caavo.com at any time.

1. If you’ve already created your Caavo Account, skip this step. If you haven’t created your Caavo

Account online, go to https://setup.caavo.com and create one.

2. Unpack Control Center.

Your box includes: Control Center, Caavo Remote + Batteries, IR Blasters, Power Cable.

3. Place the included AA batteries into the Caavo Remote.

4. If you have an Audio Video Receiver (AVR) or Sound Bar connected to your TV via HDMI, leave

it connected on both ends. Then, disconnect all your HDMI source devices from your

AVR/Sound Bar. You will connect Caavo to your AVR/ Sound Bar.

OR If you do not have an AVR/Sound Bar, or your AVR/Sound Bar is connected via RCA or

optical, disconnect all your HDMI source devices from your TV. You will connect Caavo

directly to your TV.

5. Place Control Center in a central location where IR signals can reach both your source devices

and your AVR or TV.

6. Plug in your source devices to the 4 INPUT ports on the back of Control Center.

Start your search here



Summary of content (5 pages)

PAGE 1
Start your search here  Caavo  Accessories  General Getting Started Tips and Tricks May 23, 2018 12:49 by Boone Follow Getting Started This guide is here to help you get started with Control Center. If you have any questions, you can contact Caavo support at support.caavo.com at any time. 1. If you’ve already created your Caavo Account, skip this step. If you haven’t created your Caavo Account online, go to https://setup.caavo.com and create one. 2. Unpack Control Center.
PAGE 2
7. Plug in an HDMI cable from the OUT port on Control Center into your AVR, Soundbar, or directly into your TV (if you are not using AVR or Soundbar). 8. Connect the Caavo power cord to a wall outlet. 9. Turn on your TV with your TV’s remote (and AVR/Sound Bar too). Follow the on-screen instructions to complete your setup experience. During setup, you will be instructed how to use the included IR accessories (if needed).
PAGE 3
Your Caavo Account The last step in the setup process is to sign in to (or create) your Caavo account. Here you will be asked to select the apps and streaming services that you want to use with Caavo. You'll need to make sure you've downloaded the apps on each source device, streamer box, or STB in order to use them with Caavo.
PAGE 4
Power Cord The included Caavo power cord is design... Wall Charger The included USB wall charger is design... What To Do If I'd Like A Diﬀerent Wood Top For My Caavo Please contact customer support via sup... Comments 0 comments Article is closed for comments. Facebook Twitter Linked in YouTube © Copyright 2018 Caavo Inc. All Rights Reserved.
PAGE 5
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.