C9T Bluetooth (BT ) Social Distancing and Temperature Monitoring Operating Manual
The C9T Bracelet Red Push Button i) On and Off Switch ii) Pager to Administrator Velcro Material Strap i) Comfortable Strap ii) Velcro Adjustable USB Plug in Socket i) Micro USB connector ii) Plug in USB to charge Multi Color LED Light i) Normal & Alarm status ii) Battery & Pager status iii) Social Distancing violation & High Temperature visual alerts What’s in the box i) 1 x Bracelet Body Device iii) 1 x USB Charger Cable ii) iv) 1 x Velcro Material Strap 1 x User Manual Note: Please read this manual ca
To use the C9T Bracelet i) Take out the bracelet body and the Material Velcro Strap from the box and assemble the strap as below: (1) (3) (2) (4) ii) To turn the device on, press the Red button until the LED lights either a fixed Green colour if the bracelet battery is charged or flash Yellow if it needs charging. iii) Its recommended to charge the bracelet for 2 hours before use. Take out the USB Cable and plug into the Bracelet to charge it in a USB port.
Quick view of C9T Bracelets functions C9T BT (Bluetooth Version) has a Black plastic body Uses Mobile phone App for Bluetooth Data Transmission FUNCTION AND MEANINGS C9T WF (Wi Fi Version) has a Dark Grey plastic body Uses Registered Wi-Fi networks to transmit and receive data LED (COLOUR AND STATUS) Bracelet Requires Setup CYAN Battery Charged Unit is ON GREEN Battery Charging GREEN Battery is Low, Need Charging YELLOW User High Temperature Alert RED Continual Flashing Fixed Continual Flashing Continu
C9T BT (Bluetooth Version) Data Reports + Alerts C9T Servers Data + Alerts Data + Alerts Administrators Data + Alerts The first time the C9T BT Bracelet is used, the LED light will flash a CYAN colour, this means the bracelet needs to be setup and registered by the user onto the C9T Web based Server Network. This is done by the user downloading an App C9Teen. Once setup, the system will anonymously store interaction data such as Social Distance Violations, their durations and other users involved.
C9T BT (Bluetooth Version) Setting up the Device to be used on the C9T Network i) Once the bracelet is fully charged and is ready to use. Download and Install the “C9Teen” App from Apple Store or Google Play onto the user’s Mobile Phone. ii) First press the plus icon + to register the user’s full name. Once the name has been registered press the CONFIRM bar. This will then prompt the user to scan their unique QR Code for automatic registering.
C9T BT (Bluetooth Version) iii) Scan the unique QR code found on the inside of the back cover of this user manual. C9T Scan QR Code Go Back iv) Once scanned press the GO BACK Bar.
C9T BT (Bluetooth Version) v) Once the unique QR Code has been scanned the home page will display the users name, their body temperature, a bracelet icon and a battery charge level indicator. The user bracelet is now registered on C9T Network, confirmed by a fixed Green LED light. vi) The user now wears the bracelet and carries on their daily activities.
C9T BT (Bluetooth Version) Social Distancing The C9T Bracelet will scan and search continuously for other C9T Bracelets. The social distance is set by the C9T Network Administrator from 1m to 3m. When the preset safety distance is violated the user will receive a short single Vibration Alert and the LED light will flash three times in MAGENTA. The bracelet will then record the SDV (Social Distance Violation), along with the duration of the SDV and the other users involved in the SDV.
C9T BT (Bluetooth Version) Temperature Monitoring 1) The user’s body temperature will be continuously monitored for a high body temperature violation. The High Temperature limit can only be set by the Network Top Administrators. When the users body temperature is high their bracelet will make 1 long vibration and the LED light will be a fixed Red colour. An alert will be registered on the C9T Network database and the Team and Top Administrators will be notified immediately to take the relative action.
C9T BT (Bluetooth Version) Pager Feature When the user is in range of their mobile phone, an emergency paging alert message can be sent to all the administrators by pressing the Red button once, for 2 to 3 seconds. The LED will flash BLUE once and one quick vibrate alert is given to confirm the page. When the bracelet receives a page it will vibrate 4 times and the LED light will flash BLUE continuously until the Red button is pressed to confirm page receipt.
C9T BT (Bluetooth Version) Contact Tracing In the event a C9T bracelet user is found to be infected the C9T Administrators can then carry out a Database SDV Enquiry. The infected user’s full name or unique QR Code number is used to trace all the other users that have had social distance violations with the infected user. The enquiry can list SDVs up to one month prior to the enquiry. The SDV data of contacts and durations can be analyzed for the System Administrators to decide their course of action.
C9T WF (Wi Fi Version) C9T Servers Data Reports + Alerts Administrators Transmission via Wi-Fi Direct to network server Data + Alerts Data + Alerts Data + Alerts The C9T BT Bracelet LED will flash a CYAN colour, until it has been setup and registered by a Top Administrator onto the C9T Web based Server Network. This is done by the Administrator using an interface cable and software platform.
C9T WF (Wi Fi Version) Social Distancing The C9T Bracelet will scan and search continuously for other C9T Bracelets. The social distance is set by the C9T Network Administrator from 1m to 3m. When the pre set safety distance is violated, the user will receive a single Vibration Alert and the LED light will flash three times in MAGENTA. The bracelet will then record the SDV (Social Distance Violation), along with the duration of the SDV and the other users involved in the SDV.
C9T WF (Wi Fi Version) Temperature Monitoring 1) The user’s body temperature will be continuously monitored for a high body temperature violation. The High Temperature limit can only be set by the Network Top Administrators. When the users body temperature is high, the user’s bracelet will make 1 long vibration and the LED light will be a fixed Red colour. An alert will be registered on the C9T Network database and the Team and Top Administrators will be notified immediately to take the relative action.
C9T WF (Wi Fi Version) Pager Feature An emergency paging alert message can be sent to all the Administrators by pressing the red button once on the side of the bracelet for 2 to 3 seconds. The LED light will flash BLUE and a quick vibrate alert confirms the page is sent. Receiving a page on the C9T WF bracelet, it will vibrate 4 times and the LED will flash BLUE continuously when the user is paged by their Team Administrator and flash White when paged by the Top Administrator.
C9T WF (Wi Fi Version) Access Control and Accessed Areas If the C9T Network Area has be created either using the C9T Beacons by the Network Administrators or the optional RFID programmable chips have been installed in the bracelets and used within an already existing access control system. The Administrators can also verify and track the locations accessed and time durations spent in those areas by the infected user in the previous month.
Declaration of Compliance Trakitall Ltd declare that this Bracelet Device complies with and conforms to, all the necessary EU regulations and legislations. The product is CE, FCC certified and ROHS compliant. Manufacturer: Trakitall Ltd Hong Kong MADE IN CHINA NOTE: A Rechargeable Lithium Polymer battery is used in this device. Please ensure the battery is charged correctly. Should the need to dispose this product or battery please do so carefully and abide by the rules of your country.
Scan for C9T BT (Bluetooth) Version Only Scan this Unique QR Code to register your BT bracelet onto the C9T Database Network.
www.trakitall.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ISED Statement ‐ English: This device complies with Industry Canada license ‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.