Product Specification Product name:WIFI BLE Module Product model: C-8082U
1.Product Overview: C-8082u is a BK7231U_QFN32 embedded low-power WIFI and BLE wireless communication module, suitable for smart home, can easily provide network services for home appliances.The hardware interface of this module is simple and the protocol is clear, which can make it convenient for customers to integrate the module into household appliances at the fastest speed.The chip used in this module is the highest integrated IEEE 802.11n SoC in the industry at present, supporting ieee802.
4.
5.Performance parameter: Specifications Model C-8082U Standard authentication FCC/CE/SRRC Wireless standards 802.11b/g/n,1T1R Frequency Range 2.412GHz - 2.
7.
8.
15 CS I/O 16 SCK I/O 17 U2_RXA I/O 18 U2_TXA I/O 19 20 21 22 23 24 25 REST I P21 or I2C1 TMS, or JTAG TMS or QSPI IO2 Flash download chip enable signal at download mode p20 or I2C1 SCL, or JTAG TCK or QSPI IO3 Flash download port clock signal at download mode P1 port or UART2 RXD or I2C2 SDA, through Commonly used for user UART receiving, rf calibration test command control P0 or UART2 TXD or I2C2 SCL, through Commonly used for user UART transmission, rf calibration test command control Chip
Key features of the profile: -Initial Ramp=1-2.5℃/sec to 175℃ equilibrium -Equilibrium time=60 to 80 seconds -Ramp to Maximum temperature (250℃)=3℃/sec Max -Time above liquidus temperature(217℃): 45 - 90 seconds -Device absolute maximum reflow temperature: 250℃ 11.
(OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF Module. For 15 B (§15.107 and if applicable §15.107) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.
XIAMENSHIXINWEI C-CHIP TECHNOLOGY CO., LTD. TYJW-JHS V1.1 Module statement The single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below. 1) The radio elements have the radio frequency circuitry shielded.