WI-FI weather station with 7-In-1 professional sensor Model: C6081A User Manual * POLE IS FOR ILLUSTRATION PURPOSE. IT'S NOT INCLUDED.
ABOUT THIS USER’S MANUAL This symbol represents a warning. To ensure safe use, always adhere to the instructions described in this documentation. This symbol is followed by a user’s tip. PRECAUTIONS --Keep and reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings, export data lost and any consequences that occur should an inaccurate reading take place.
TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONSOLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD DISPLAY . . . . . . .
INTRODUCTION Thank you for selecting WI-FI weather station with 7-in-1 professional sensor. This system gathers and automatically uploads accurate and detail weather data to Weather Underground and Weathercloud website - the famous weather service which allows weather observers to upload their local weather data with automated personal weather stations (PWS) - at which you can access and upload your weather data freely.
1. 2. 3. 4. 5. 6. 7. 8. [ SNOOZE ] key [ HISTORY ] key [ MAX / MIN ] key [ CHANNEL ] key [ BARO ] key [ WIND ] key [ SUNT ] key [ RAIN ] key 9. LCD display 10. [ WI-FI / SENSOR ] key 11. [ REFRESH ] key 12. Wall mounting holder 13. [ CLOCK SET ] key 14. [ V / INDEX ] key 15. [ Ʌ ] key 16. [ OFF / LO / HI ] key 17. Table stand 18. [ ALARMT ] key 19. [ ALERT ] key 20. Power jack 21. Battery compartment 22. [ °C / °F ] key 23. [ RESET ] slide switch LCD DISPLAY 1 2 3 4 5 6 7 8 9 Display section: 1.
WIRELESS 7-IN-1 SENSOR 1 2 5 3 4 6 9 7 8 10 11 12 1. Antenna 2. Radiation shield & Thermo-hygro sensor 3. Mounting parts (fit for 35 ~40mm diameter pole) 4. Battery door 5. [ RESET ] key 6. Transmission status LED 7. Bubble level gradienter 8. Rain collector 9. Wind vane 10. UV / light sensor 11. Solar panel 12.
INSTALLATION AND SETUP Your console can pair up with one wireless 7-in-1 outdoor sensor and up to 7 wireless indoor sensors. (1pc wireless indoor sensor included) INSTALL WIRELESS 7-IN-1 SENSOR Your wireless 7-IN-1 sensor measures wind-speed, wind-direction, rainfall, UV, light intensity, temperature and humidity for you. It’s assembled and calibrated for your easy installation.
INSTALL WIRELESS INDOOR SENSOR 1. Remove the battery door of the sensor. 2. Use the channel slide switch to set the channel number for the sensor (e.g. Channel 1) 3. Insert 2 x AA size batteries into the battery compartment and close the battery door according to the polarity information marked on the battery compartment. 4. The sensor is in synchronization mode, and can be registered to the console within the next few minutes. The transmission status LED will begin to flash every 1 minute.
1. Remove the battery door of the console. 2. Insert 3 new AAA batteries as per the polarity indicated, 3. Replace the battery door. BUILT-IN MEMORY The console has built-in FLASH memory that holds the vital settings. These include: --Time Zone, DST status, Time SYNC status, WI-FI and Weather server setting, Latitude / Longitude, Hemisphere setting, Calibration values, and Sensor ID of paired sensor(s) RESET AND FACTORY HARD RESET To reset the console and start again, press the [ RESET ] key once.
CREATE WEATHER SERVER ACCOUNT & SETUP WI-FI CONNECTION The console can upload weather data to WUnderground and / or Weathercloud through WI-FI router, you can follow the step below to setup your device. NOTE: The Weather Underground and Weathercloud website are subjected to change without notice. CREATE WEATHER UNDERGROUND ACCOUNT 1. In https://www.wunderground.com click the "Join" on the top right corner to open the registration page. Follow the instructions to create your account.
5. Jot down Your "Station ID" and "Station key" for the further setup step. CREATE WEATHERCLOUD ACCOUNT 1. In https://weathercloud.net enter your information in "Join us today" section, then follow the instructions to create your account. NOTE: Use the valid email address to register your account. 2. Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device.
3. Enter all the information in Create new device page, for the Model* selection box select the "W100 Series" under "CCL" section. for the Link type* selection box select the "SETTINGS", Once you have completed, click Create. 4. Jot down your ID and key for the further setup step.
SETUP WI-FI CONNECTION 1. When you power up the console for the first time, the console LCD will show flashing "AP" and " " icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI settings. User can also press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter AP mode manually. 2. Use the smart phone, tablet, or computer to connect the console through WI-FI. 3.
SETUP THE WEATHER SERVER CONNECTION Enter the following information into the below web interface "SETUP" page to connect the console to weather server, If you do not want to use Wunderground.com or Weathercloud.net, please empty the station ID & key to ignore the data upload.
TIME SERVER CONNECTION STATUS After the console has connected to the internet, it will attempt to connect to the internet time server to obtain the UTC time. Once the connection succeeds and the console's time has been updated, the “ ” icon will appear on the LCD. The time will automatically synchronize Internet time server at 12:00AM and 12:00PM per day. Also you can press the [REFRESH ] key to get the internet time manually within 1 minute.
NOTE: --Calibration of most parameter is not required, with the exception of Relative Pressure, which must be calibrated to sea-level to account for altitude effects. --Indoor temperature and humidity calibration values are not applicable for this console. VIEW YOUR WEATHER DATA IN WUNDERGROUND To view your weather station live data in a web browser (PC or mobile version), please visit http:// www.wunderground.com, and then enter your “Station ID” in the searching box.
FIRMWARE UPDATE The console supports OTA firmware update capability. Its firmware may be updated over the air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. Update function, however, is not available through mobile/smart devices. Current firmware version Firmware version: 1.00 Browse Please to select the firmware file for update Upload Bottom of web interface ADVANCED page Press to start upload the firmware to console FIRMWARE UPDATE STEP 1.
NOTE: --In normal mode, press [ CLOCK SET ] key to switch between year and date display. --During the setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to normal model. DAYLIGHT SAVING TIME (DST) DST function is set to "AUTO" by default (for EU or US version). If the current date on display is with in the summer daylight saving period, the time will be automatically adjusted forward by +1 hour, and DST icon will be shown on the LCD display.
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION 1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds. 2. When the alarm time displays, press [ ALARM ] key again to activate the alarm function. Or press [ ALARM ] key twice to activate the alarm with ice pre-alarm function. Alarm off Alarm on Alarm with ice-alert NOTE: Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30 minutes earlier if the outdoor temperature is below -3°C.
VIEW THE OTHER INDOOR CHANNELS (OPTIONAL FEATURE WITH ADD ON EXTRA SENSORS) This console is capable to pair with a wireless 7-IN-1 sensor and up to 7 wireless indoor sensors. If you have 2 or more Indoor sensors, you can press [ CHANNEL ] key to switch between different wireless channels in normal mode, or press and hold [ CHANNEL ] key for 2 seconds to toggle auto-cycle mode to display the connected channels at 4 seconds interval.
BEAUFORT SCALE TABLE The Beaufort scale is an international scale of wind velocities ranging from 0 (calm) to 12 (Hurricane force). Beaufort Scale Description 0 Calm 1 Light air 2 Light breeze 3 Gentle breeze 4 Moderate breeze 5 Fresh breeze 6 Strong breeze 7 High wind 8 Gale 9 Strong gale 10 Storm 11 Violent storm Wind Speed < 1 km/h < 1 mph < 1 knots < 0.3 m/s 1.1 ~ 5km/h 1 ~ 3 mph 1 ~ 3 knots 0.3 ~ 1.5 m/s 6 ~ 11 km/h 4 ~ 7 mph 4 ~ 6 knots 1.6 ~ 3.
12 Hurricane force ≥ 118 km/h ≥ 74 mph ≥ 64 knots ≥ 32.7m/s Severe widespread damage to vegetation and structures. Debris and unsecured objects are hurled about. WEATHER INDEX At the WEATHER INDEX section, you can press [ INDEX ] key to view different weather index DEWPOINT HEAT INDEX WIND CHILL. in this sequence: FEELS LIKE FEELS LIKE Feels Like Temperature shows what the outdoor temperature will feel like.
NOTE: --The accuracy of a general pressure-based weather forecast is about 70% to 75%. --The weather forecast is reflecting the weather situation for next 12~24 hours, it may not necessarily reflect the current situation. --The SNOWY weather forecast is not based on the atmospheric pressure, but based on the temperature of outdoor. When the temperature is below -3°C (26°F), the SNOWY weather icon will be displayed on the LCD.
NOTE: To ensure to have correct data, please reset all the rainfall record when you reinstall your wireless 7-IN-1 sensor to other location LIGHT INTENSITY, UV INDEX & SUNBURN TIME This section of display show the sunlight intensity, UV index and sunburn time. Press the [SUN] key to change the mode. LIGHT INTENSITY MODE: 1. During light intensity mode, press and hold [ SUN ] key for 2 seconds to enter unit setting 2. press [ ] or [ ] key change the unit in sequence: Klux → Kfc → W/m². 3.
pressure MIN relative pressure MAX rain rate. MAX absolute pressure MIN absolute pressure TO CLEAR THE MAX/MIN RECORDS Press and hold [ MAX / MIN ] key for 2 seconds to reset the current on display MAX or MIN records. NOTE: The LCD will also display the " "/" ", " " icon, data records time & date. PAST 24 HOURS HISTORY DATA The console automatically stores the weather data of the past 24 hours. 1. Press [ HISTORY ] key to check the beginning of the current hour's weather data, e.g.
Feels Like High Alert Feels Like Low Alert Dewpoint High Alert Dewpoint Low Alert Heat Index High Alert WindChill Low Alert UV index High Alert Light intensity High Alert Pressure Drop Hourly Rainfall -65°C ~ 50°C -40°C ~ 80°C Weather index 26°C ~ 50°C -65°C ~ 18°C 1 ~16 0.01 ~ 200.0Klux 1hPa ~ 10hPa 1mm ~ 1000mm UV & light intensity Barometer Rainfall 20°C 0°C 10°C -10°C 30°C 0°C 10 100Klux 3hPa 100mm 2.
MAINTENANCE BATTERY REPLACEMENT When low battery indicator “ ” is displayed in OUT or CH section, it indicates that the outdoor 7-IN-1 sensor and current channel sensor battery power is low respectively. Please replace with new batteries. WIRELESS 7-IN-1 SENSOR MAINTENANCE CLEANING THE RAIN COLLECTOR 1. Rotate the rain collector by turning it 30°anti-clockwise. 2. Gently remove the rain collector. 3.Clean and remove any debris or insects. 4.Install the collector when it is clean and fully dried.
Data not reporting to Wunderground.com or weathercloud.net 1. Ensure your Station ID and Station Key are correct. 2. Ensure the date and time is correct on the tablet . If incorrect, you may be reporting old data, not real time data. 3. Ensure your time zone is set properly. If incorrect, you may be reporting old data, not real time data. Wunderground Precip. Accum. Total graph offset 1 hour reset time, during summer daylight saving time 1.
Hour format 12hr AM / PM or 24 hr Date display DD / MM or MM / DD Time synchronize method Through Internet time server to synchronize the UTC Weekday languages EN / DE / FR / ES / IT / NL / RU Time Zone +13 ~ -12 hour DST AUTO / OFF Barometer Display & Function Specification Note: The following details are listed as they are displayed or operate on the console.
Wind speed display range 0 ~ 112mph, 50m/s, 180km/h, 97knots Resolution mph, m/s, km/h and knots (1 decimal place) Speed accuracy < 5m/s: +/- 0.5m/s; > 5m/s: +/- 6% (whichever is greater) Display mode Gust / Average Memory modes Historical Data of past 24 hours, Max Gust / Average Alarm Hi Wind Speed Alert (Average) Wind direction display mode 16 directions or 360 degree Rain Display & Function Specification Note: The following details are listed as they are displayed or operate on the console.
WIRELESS 7-IN-1 SENSOR Dimensions (W x H x D) Weight Main power Weather data RF transmission range RF frequency (depend on country version) Transmission interval Operating range 322 x 296 x 217mm (12.7 x 11.7 x 8.5in) 674g (with batteries) 3 x AA size 1.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.