WI-FI weather station with 5-In-1 professional sensor Model: C6089A User Manual
TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 OVERVIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONSOLE. . . . . . . . .
PRECAUTIONS -- Keep and reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings, export data lost and any consequences that occur should an inaccurate reading take place. -- This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information -- Do not subject the unit to excessive force, shock, dust, temperature or humidity.
this manual through to fully understand and enjoy its features, and keep it handy for future use. OVERVIEW CONSOLE 1 10 2 11 12 19 20 13 14 21 15 22 16 3 4 6 7 5 8 17 18 9 1. 2. 3. 4. 5. 6. 7. 8. [ ALARM/SNOOZE ] key LCD display [ HISTORY ] key [ WIND ] key [ RAIN ] key [ MAX / MIN ] key [ CHANNEL ] key [ BARO ] key 9. Table stand 10. Wall mounting holder 11. [ ALERT ] key 12. [ ALARM ] key 13. [ CLOCK SET ] key 14. [ HI / LO / AUTO ] key 15. [ °C / °F ] slide switch 16.
WIRELESS 5-IN-1 SENSOR 1 2 5 3 4 6 9 7 8 10 11 1. Antenna 2. Radiation shield & Thermo-hygro sensor 3. Mounting parts (fit for 35 ~40mm diameter pole) 4. Battery door 5. [ RESET ] key 6. Transmission status LED 3 7. Bubble level gradienter 8. Rain collector 9. Wind vane 10. Solar panel 11.
INSTALLATION AND SETUP Your console can pair up with one wireless 5-In-1 outdoor sensor and up to 7 wireless thermohygro sensors. (1pc wireless thermo-hygro sensor included) INSTALL WIRELESS 5-IN-1 SENSOR Your wireless 5-In-1 sensor measures wind-speed, wind-direction, rainfall, temperature and humidity for you. It’s assembled and calibrated for your easy installation.
POWER UP CONSOLE Your console can pairing up with the wireless 5-IN-1 outdoor weather sensor and up to 7 optional wireless sensors. (Not included) INSTALL THE BACKUP BATTERY 1. Remove the battery door of the console. 2. Insert a new CR2032 battery as per the polarity information marked on the battery compartment. 3. Replace the battery door.
RESYNCHRONIZE SENSORS Press the [ SENSOR / WI-FI ] key once for the console to enter sensor Synchronization mode, and the console will re-register all the sensors that have already been registered to the it before . i .e . the console will not lose the connection of the sensors that you’d paired up before . CHANGING BATTERIES AND MANUAL PAIRING OF SENSOR Whenever you changed the batteries of the wireless thermo-hygro or 5-In-1 weather sensor, re-synchronization must be done manually . 1 .
2 . After you have created your account and completed the Email validation, please go back to the WUndergound web page to login . Then, click “My Profile” button on the top to open the drop-down menu and click "My Weather Station" . 3 . In "My Weather Station" page bottom, press the "Add New Device" button to add your device . 4 . In step “Select a Device Type”, choose “Other” in the list, then press “Next” . 5 . In step “Set Device Name & Location”, select your location on the map, then press "Next" .
6 . Follow their instruction to enter your station information, in the Step "Tell Us More About Your Device", (1) enter a Name for your weather station. (2) fill in the other information (3) select "I Accept" to accept Weather underground's privacy terms, (4) click “Next” to create your station ID and key . (1) (2) (2) (3) (4) 7 . Jot down Your "Station ID" and "Station key" for the further setup step . CREATE WEATHERCLOUD ACCOUNT 1 . In https://weathercloud.
NOTE: Use the valid email address to register your account . 2 . Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device . 3 . Enter all the information in Create new device page, for the Model* selection box select the "W100 Series" under "CCL" section . For the Link type* selection box select the "SETTINGS", Once you have completed, click Create . 4 . Jot down your ID and key for the further setup step .
SETUP WI-FI CONNECTION 1 . When you power up the console for the first time, the console LCD will show flashing "AP" and " " icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI settings . User can also press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter AP mode manually . 2 . Use the smart phone, tablet, or computer to connect the console through WI-FI . WI-FI to select 3 .
SETUP THE WEATHER SERVER CONNECTION Enter the following information into the below web interface "SETUP" page to connect the console to weather server, If you do not want to use Wunderground.com or Weathercloud.net, please empty the station ID & key to ignore the data upload.
TIME SERVER CONNECTION STATUS After the console has connected to the Internet, it will attempt to connect to the Internet time server to obtain the UTC time . Once the connection succeeds and the console time has been updated, the “ ” icon will appear on the LCD . The time will automatically synchronize Internet time server at 12:00AM and 12:00PM per day . Also you can press the [ REFRESH ] key to get the Internet time manually within 1 minute .
NOTE: Calibration of most parameter is not required, with the exception of Relative Pressure, which must be calibrated to sea-level to account for altitude effects. VIEW YOUR WEATHER DATA IN WUNDERGROUND To view your weather station live data in a web browser (PC or mobile version), please visit http://www. wunderground.com, and then enter your “Station ID” in the searching box . Your weather data will show up on the next page .
FIRMWARE UPDATE STEP 1. Download the latest version firmware to your PC/Mac. 2. Set the Console into AP (access point) mode then connect the PC/Mac to the console (ref to "SETUP WI-FI CONNECTION" section in previous page). Browse 3. Click the in firmware update section and browse the location of the file you Browse download in step 1. To update the WI-FI firmware, click the in WI-FI firmware section. Upload to start transfer the firmware file to console. 4. Click the corresponding 5.
3. Press [ ALARM ] key again to step the setting value to Minute with the Minute digit flashing. 4. Press [ ] or [ ] key to adjust the value of the flashing digit. 5. Press [ ALARM ] key to save and exit the setting. NOTE: -- In alarm mode, the “ ” icon will display on the LCD. -- The alarm function will turn on automatically once you set the alarm time. ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION 1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds. 2.
TEMPERATURE / HUMIDITY FUNCTION -- The temperature and humidity reading are display on the outdoor and indoor / CH section. -- Use the [ °C / °F ] slide switch to select the temperature display unit. -- If temperature / humidity is below the measurement range, the reading will show “Lo”. If temperature / humidity is above the measurement range, the reading will show “HI”.
TO SET THE WIND SPEED UNIT AND DIRECTION DISPLAY FORMAT 1. In normal mode, press and hold [ WIND ] key for 2 seconds to enter into wind speed unit mode and the unit will flash. Press [ ] or [ ] key to change the wind speed unit in this sequence: m/s km/h knots mph 2. Press [ WIND ] key again to enter wind direction setting mode. The wind direction reading will flash, and then press [ ] or [ ] key to select the display format between 360 degree or 16 direction. 3.
9 Strong gale 10 Storm 11 Violent storm 12 Hurricane force 75 ~ 88 km/h 47 ~ 54 mph 41 ~ 47 knots 20.8 ~ 24.4 m/s 89 ~ 102 km/h 55 ~ 63 mph 48 ~ 55 knots 24.5 ~ 28.4 m/s 103 ~ 117 km/h 64 ~ 73 mph 56 ~ 63 knots 28.5 ~ 32.6 m/s ≥ 118 km/h ≥ 74 mph ≥ 64 knots ≥ 32.7m/s Some branches break off trees, and some small trees blow over. Construction / temporary signs and barricades blow over. Trees are broken off or uprooted, structural damage likely. Widespread vegetation and structural damage likely.
WEATHER FORECAST The built-in barometer continually monitor atmosphere pressure. Based on the data collected, it can predict the weather conditions in the forthcoming 12~24 hours within a 30~50km (19~31 miles) radius. Sunny Partly cloudy Cloudy Rainy Rainy / Stormy Snowy NOTE: -- The accuracy of a general pressure-based weather forecast is about 70% to 75%. -- The weather forecast is reflecting the weather situation for next 12~24 hours, it may not necessarily reflect the current situation.
TO RESET THE TOTAL RAINFALL RECORD In normal mode, press and hold [ HISTORY ] key for 2 seconds to reset all the rainfall record. NOTE: To ensure to have correct data, please reset all the rainfall record when you reinstall your wireless 5-In-1 sensor to other location. MAX / MIN DATA RECORD The console can record the accumulated MAX / MIN weather data with the corresponding time stamp for you to easy review.
Feels Like High Alert Feels Like Low Alert Dew point High Alert Dew point Low Alert Heat Index High Alert Wind Chill Low Alert Pressure Drop Rain rate -65°C ~ 50°C -40°C ~ 80°C Weather index 26°C ~ 50°C -65°C ~ 18°C 1hPa ~ 10hPa 1mm ~ 1000mm Barometer Rain rate 20°C 0°C 10°C -10°C 30°C 0°C 3hPa 100mm 2. Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert setting and the alert reading will flash. 3.
WIRELESS 5-IN-1 SENSOR MAINTENANCE CLEANING THE RAIN COLLECTOR 1 . Rotate the rain collector by turning it 30°anti-clockwise . 2 . Gently remove the rain collector . 3 .Clean and remove any debris or insects . 4 .Install the collector when it is clean and fully dried . REPLACE THE WIND VANE Unscrew and remove the wind vane for replacement REPLACE THE WIND CUP 1 . Unscrew and remove the top cap 2 . Remove the wind cup for replacement CLEANING HYGRO-THERMO SENSOR 1 .
SPECIFICATIONS CONSOLE General Specification Dimensions (W x H x D) Weight Main power Backup battery Operating temperature range Operating Humidity range 118 x 192.5 x 21mm (4.6 x 7.6 x 0.
Humidity unit Accuracy Resolution Memory modes % 1 ~ 20% RH ± 6.5% RH @ 25°C (77°F) 21 ~ 80% RH ± 3.5% RH @ 25°C (77°F) 81 ~ 99% RH ± 6.5% RH @ 25°C (77°F) 1% Historical data of past 24 hours, Max / Min Outdoor Temperature (Note: Data detect by 5-In-1 sensor) Temperature unit Accuracy Resolution Memory modes °C and °F 5.1 ~ 60°C ± 0.4°C (41.2 ~ 140°F ± 0.7°F) -19.9 ~ 5°C ± 1°C (-3.8 ~ 41°F ± 1.8°F) -40 ~ -20°C ± 1.5°C (-40 ~ -4°F ± 2.
WIRELESS 5-IN-1 SENSOR Dimensions (W x H x D) Weight Main power Weather data RF transmission range RF frequency (depend on country version) Transmission interval Operating temperature range Operating humidity range 322 x 296 x 217mm (12.7 x 11.7 x 8.5in) 674g (with batteries) 3 x AA size 1.