Setup guide Electronic book reader BookPlace MONO Thank you for purchasing this product. Keep the warranty and manuals in a safe place where you can use them when needed. Before using the product, read the "Safe operation and support guide" supplement. TinkerBell_EN_SetupGuide.indd 1 GX1C000XXXXX 2012.12 Printed in China ©2012 Toshiba Corporation All rights reserved.
Introduction What you need to get started • Wireless LAN environment You need an environment in which you can connect to the internet by Wi-Fi (wireless LAN environment) to use the product. If you do not have access to a wireless LAN environment, refer to "Create a wireless LAN environment" on the back cover about how to set one up. Finger operations You can operate the product by touching its screen. ●● Tap Touch the screen lightly once ●● Flick TinkerBell_EN_SetupGuide.
Entering text A keyboard appears automatically. If the keyboard is not visible, tap the text field to display it. FSKAREN keyboard (QWERTY/10-key) Tap QWERTY or 10-key to change the keyboard. QWERTY You can type text the same as on a computer keyboard. 10-key You can type text the same as on a mobile phone. Typing text (using QWERTY) Example : Typing "toshiba" 1. Tap to change the character input mode to 2. Type t, o, s, h, i, b, and a. * Use 3. Tap *1 to change between capital and small letters.
Getting ready 1 Check the accessories, model number, and serial number • Check the accessories About the accessories See the "Welcome to the BookPlace MONO Series Electronic Book Reader" pamphlet • Check the model number and the serial number The model number and serial number are written on the side of the product. Confirm that the numbers are the same as on the warranty. If you have any questions, contact Toshiba's computer support center. TinkerBell_EN_SetupGuide.
2 Connect to a computer to charge the battery Use the power cord provided to connect to a USB connector on a computer. Charging starts automatically. ① ② Power cord Side with hooks is up Insert straight into the product You can use the product while it is charging. Continue charging until you have finished the initial settings. TinkerBell_EN_SetupGuide.
3 Turn on the power Note Do not touch the screen as you turn on the power. If you are touching the screen while turning on the power, the touch panel may stop operating normally. 1 Press the power button for two seconds The logo screen appears after a few seconds. After that, the [End user license agreement] screen appears. Do the initial settings. TinkerBell_EN_SetupGuide.
4 Do the initial settings Follow the on-screen instructions to do the initial settings. Memo After turning on the power, if no operations are done for a while the screen turns off and goes dark. Briefly touch the power button to turn the screen on. 1 Confirm the contents of the user's license agreement and then tap [I accept the user's license agreement.] to check it. 2 Tap [Next] 3 Wireless LAN settings Turn on the wireless communications functions of the wireless LAN access point you are using.
For automatic set up (WPS) (If the wireless LAN access point you are using has the WPS mark (supports Wi-Fi Protected Setup™)). 1. Tap [Automatic set up (WPS)] 2. Press and hold the wireless LAN access point's WPS button until the access point's lamp starts to flash Do it within two minutes after the [WPS Settings] screen appears. 3. Tap [Next] For manual set up 1. Tap [To settings screen] 2.
4 If the date and time are correct, tap [Next] * If the date and time are not correct, tap to adjust them. 5 Do the [Book Place] settings Using "Book Place" for the first time 1. Tap [Register as a member for free now] 2. Enter your member information * If the display on the screen is disrupted because of transmission conditions, tap [Refresh screen].
3. Tap [Confirm information that was entered] * If the step 4 screen does not appear, there is an error in the text field in which the cursor is. Check the explanation on the screen, and enter the information again. 4. Confirm the information and then tap [Register] * To enter information again, tap [Back]. Member registration is complete. The bookcase screen appears. An email notification that your membership registration is complete is sent to the email address you registered.
To customers without access to wireless LAN Create a wireless LAN environment You need an environment in which you can connect to the internet by Wi-Fi to use the product. This is because you need to communicate with digital book stores on the internet to purchase digital books. You need to do the following to connect to the internet via a wireless LAN from your home. To communicate via wireless LAN Check if the broad band router you are using has a built-in wireless LAN access point function.
Contact information * Current as of December 2012. The business hours and conditions for each company may be different. About initial settings, operations, setting procedures, and repairs Toshiba (Toshiba PC support center) Domestic phone line: 0120-97-1048 (telephone access and support are free) The automated answering service will handle your call. Do what the automated answering service tells you. For details, see the "Safe operation and support guide" supplement.
About the product's wireless LAN function █ Overview of the wireless LAN function The product is equipped with a wireless LAN function that supports all or some of the following standards IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n. • Wireless LAN function specifications Radio frequency range IEEE 802.11b, IEEE 802.11g, IEEE 802.11n IEEE 802.11g Modulation method IEEE 802.11b IEEE 802.11n 2.
■ Characteristics of wireless communications There is a correlative relationship between the communication range and transmission rate of wireless devices. The lower the transmission rate of the wireless communications, the broader the communication range. Memo ●● The range of communications of a wireless device is affected if the antenna is placed near a metal surface or a dense solid object.
● Health effects The wireless device installed in this device broadcasts radio-wave electromagnetic energy the same as other radio products. However, the broadcast energy has been suppressed to levels that are much lower than mobile telephones or other radio devices. Toshiba assures that the wireless LAN component built into this device can be used safely in accordance with the guidelines of the radio frequency safety standards and recommendations.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.
