DUALSHOCK™4 wireless controller Here is some basic information about use of the controller. For more details about use of the controller, see "Using the wireless controller". Front A) Directional buttons B) SHARE button C) Touch pad/Touch pad button Press the touch pad to use the touch pad button.
Right stick/R3 button Press down on the stick to use it as the R3 button. H) PS button I) Stereo headset jack J) Extension port K) Left stick/L3 button Press down on the stick to use it as the L3 button. Top A) R1 button B) R2 button C) Light bar The light bar on the touch pad does not glow on the CUH-ZCT1 series.
L2 button F) USB port Mono headset Plug the mono headset into the stereo headset jack on the controller. A) Earpiece B) Microphone C) MIC switch D) Clip When you're using the microphone, you should attach the clip to your clothing. To adjust the microphone level or configure other audio settings, select [Devices] > [Audio Devices]. (Settings) > PlayStation®Camera Use the PlayStation®Camera to play camera-enabled games. You can also log in to your PS4™ system using face recognition.
CUH-ZEY2 series A) Microphone array B) AUX connector C) Dual lenses D) Status indicator E) Stand CUH-ZEY1 series
A) Microphone array B) AUX connector C) Dual lenses D) Status indicator The camera might not be included with your system, depending on country, region, and model. Connect and install the camera as described in the instruction manual for the camera. To configure camera and microphone settings, select Camera]. (Settings) > [Devices] > [PlayStation Connecting and installing Connect your PS4™ system to your TV. Make all connections before plugging the AC power cord into an electrical outlet.
HDMI input port (TV) D) HDMI cable E) AC power cord Connector shape varies depending on your PS4™ system. F) To an electrical outlet When you're going to use your PS4™ system in the vertical position, attach the vertical stand (sold separately). Connecting to the Internet You can use either Wi-Fi or a LAN (Ethernet) cable to connect your PS4™ system to the Internet. See "Set Up Internet Connection" to set up the connection. Make sure you have a LAN cable when you don’t plan to use Wi-Fi.
To the Internet Devices and connection methods required for a network connection vary depending on how your network is set up. Be sure to also refer to the instructions supplied with your network devices. Connecting the controller Connect the controller with a USB cable to pair it with your system. A) USB port (PS4™ system) B) USB port (controller) C) USB cable Turning your PS4™ system on and off Turning on your system You can turn on your PS4™ system in either of the following ways.
Notice Disconnect the AC power cord from the electrical outlet only when the power indicator is off. If you disconnect it while the power indicator is lit or blinking, data might be lost or corrupted, and you might damage your system. Putting your system in rest mode When your PS4™ system is in rest mode, it keeps operating, but at a lower power consumption. You can set the system to download files and charge a controller while it's in rest mode.
