MSDS

ManualsBrandsBurndy ManualsAccessoriesCartridge Weld Metal, 250 - 300 MCM

Product Name:

Revision Date:

Page 1 of 9

172 Standard Weld Metal

04 October 2017(rev D)

SAFETY DATA SHEET

SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

PRODUCT

Product Name: 172 Standard Weld Metal

Product Description: Gray / silver granular metal

Intended Use: Welding metal

COMPANY IDENTIFICATION

Supplier: BURNDY LLC

47 East Industrial Park Drive

Manchester, NH 03109 USA

24 Hour Emergency (INFOTRAC)

(800) 535-5053 (US and

Canada)

(352) 323-3500 (International)

Burndy Informational Number

(603) 647-5000

SECTION 2 HAZARDS IDENTIFICATION

CLASSIFICATION

Health

Environmental

Physical

 Acute Toxicity - Oral, Category 4

 Skin Irritation - Category 3

 Eye Irritation - Category 2B

 Specific Organ Toxicity – Single

Exposure – Category 3

 Acute toxicity - Category 1

LABELLING

Symbols:

Warning Environmental Hazard

Signal Word: Warning

Hazard Statements

 H 302: Harmful if swallowed

 H 411: Toxic to aquatic life and may

cause long lasting harmful effects

 H 320: Causes eye irritation

 H 316: Causes mild skin irritation

 H 335 May cause respiratory irritation

Precautionary Statements

 P 261: Avoid breathing dust/fume/gas/mist/vapors/spray

 P 264: Wash hands thoroughly after handling

 P 280: Wear protective gloves/clothing

 P 270: Do not eat, drink or smoke when using this product

 P 271: Use only outdoors or in a well-ventilated area

 P301 + P312: If swallowed: Call a POISON

CENTER/doctor/etc if you feel unwell

 P304 + P340: If inhaled: Remove person to fresh air and keep

comfortable for breathing

 P332 + 313: If skin irritation occurs: Get medical

advice/attention

Summary of content (9 pages)

PAGE 1
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 1 of 9 SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT Product Name: 172 Standard Weld Metal Product Description: Gray / silver granular metal Intended Use: Welding metal COMPANY IDENTIFICATION Supplier: BURNDY LLC 47 East Industrial Park Drive Manchester, NH 03109 USA 24 Hour Emergency (INFOTRAC) (800) 535-5053 (US and (352) 323-3500 (International) Canada) (603) 647-5000 Burndy Informatio
PAGE 2
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 2 of 9            SECTION 3 P330 Rinse Mouth P305 + P351 + P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present. Continue rinsing P337 + P313: If eye irritation persists: Get medical advice/attention. P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
PAGE 3
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 3 of 9 SECTION 5 FIRE FIGHTING MEASURES GENERAL HAZARDS The materials are not explosive; ignition temperatures are in excess of 850°F (454°C) for starting material and 1750° F (954°C) for base material. They are not shock sensitive, nor are they subject to spontaneous ignition.
PAGE 4
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 4 of 9 EXPOSED TO MOISTURE. Read and understand the instruction sheet packaged with the mold, and observe all general and safety instructions. Keep away from children. Do not tamper with valve. Keep away from ignition sources prior to use. Do not spray in eye, inhale vapors, or ingest. Use product in only well ventilated areas. Improper use can lead to exposure of molten metal and reaction by-products.
PAGE 5
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 5 of 9 Odor: Odor Threshold: Characteristic odor Not Available IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION Appearance: Gray/ Silver granules pH: Not Applicable Viscosity: Not Applicable Freezing Point: Not Available Boiling Point: Not Applicable Flash Point: Not Applicable Evaporation Rate: Not Applicable Lower Flammability Limit: Not Applicable Upper Flammability Limit: Not Applicable Vapor Pressure: Not App
PAGE 6
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 6 of 9 Inhalation: Ingestion: Breathing airborne particles or dust from mixing, spraying, sanding, grinding, etc. may cause irritation to respiratory tract. Contains substances which are considered nuisance dusts which require a NIOSH approved respirator when airborne particulate exceeds maximum allowable limit. May cause gastric distress, stomach pains, vomiting and diarrhea.
PAGE 7
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 7 of 9 GUIDANCE TO BULK PACKAGING: Regulatory UN Information Number US DOT UN3077 Proper Shipping Name Hazard Class Environmentally 9 hazardous substance, solid, n.o.s. (Copper) Packing Label (s) Group III Environmental Hazards TDG UN3077 Environmentally hazardous substance, solid, n.o.s.
PAGE 8
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 8 of 9 SECTION 15 REGULATORY INFORMATION TSCA (USA - Toxic Substance Control Act): All components of this product are listed on the U.S. Toxic Substances Control Act Chemical Inventory (TSCA Inventory) or are exempted from listing because a Low Volume Exemption has been granted in accordance with 40 CFR 723.50. EPCRA: This material contains no extremely hazardous substances.
PAGE 9
Product Name: 172 Standard Weld Metal Revision Date: 04 October 2017(rev D) Page 9 of 9 SECTION 16 OTHER INFORMATION HAZARDOUS MATERIALS IDENTIFICATION SYSTEM (HMIS) RATINGS: Health - 1 Flammability - 0 Physical Hazard - 0 PPE - E THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS: Revision Date 2/13/08 6/2/11 8/1/11 11/6/12 3/19/13 9/16/14 10/30/14 10/19/15 10/04/17 Description Rev 1 Rev 2 Rev 3 Rev 4 Rev 5 Rev 6 Rev 7 Rev C Rev D Sections Affected Sec 11, Transportation All Sections 2, 3