Contents 1 SAFE USE AND CAUTIONS ................................ 3 1.1 P LEASE COMPLY WITH THE FOLLOWING CAUTIONS WHEN USING THE PHONE. 3 1.2 P LEASE COMPLY WITH THE FOLLOWING CAUTIONS WHEN USING THE BATTERY. 4 1.3 P LEASE COMPLY WITH THE FOLLOWING CAUTIONS WHEN USING THE CHARGER. 6 NOTICE BEFORE THE USE ...................................... 6 2.1 SIM CARD ................................................................................ 6 2.2 BATTERY ....................................................
5.4 T EXT I NPUT .............................................................................. 17 6 5.4.1 ABC/abc Input Method....................................... 17 5.4.2 Number Input Method ........................................ 17 5.4.3 Handwritten input Method ................................. 17 MENU FUNCTION .............................................. 17 6.1 P HONE BOOK ........................................................................... 17 6.2 I NFORMATION.....................
Notes: The company reserves the rights to revise the product without prior notice and reserves the final rights of performance specifications of the product. IMEI: International Mobile Equipment Identification Number. Power off the phone and take out the battery to check the barcode label printed with the number on the back of the phone. The number is saved in the phone and can be shown after turning on the phone and inputting #06# in the standby mode.
The company will not take any responsibility for any aftereffect caused by using the third party’s accessories. • It is strictly prohibited to make bold to disassemble the phone. • The phone will cause interference with other electronic equipments, please keep away from electronic equipments, for example, TV, radio, personal computer and other equipments. It is strictly prohibited to place the phone nearby the credit card or magnetic field.
• Please make sure the phone is turned off before taking out the battery from the phone. • Please charge the battery in the cool and ventilated room; otherwise too high environment temperature may cause heating, smoking, burning or distortion, and even explosion of the battery. •The inner battery is equipped with special protection circuit; it is strictly prohibited to make bold to disassemble the battery; otherwise will cause the damage of liquid crystal panel and leakage of liquid crystal.
1.3 Please comply with the following cautions when using the charger. • Please carefully read the operating instructions and charger surface identification carefully before the use. • Please don’t disassemble or reconstruct the charger; it is strictly prohibited to use the charger if the power cord is damaged; otherwise it may cause electric shock, fire and charge damage. • It is strictly prohibited to contact the charger with wet hands.
• With the SIM card, you can use all the functions of the phone. All the information relevant to the establishment of network connection is recorded in the chip of SIM card, personal data (including PIN code (Personal Identification Number), phone book, SMS and other additional system services) is also recorded in the card.
and power off automatically. • The battery can be charged and discharged for hundreds of times, however, it will lose efficiency finally. When the standby time and call time of the phone is shortened obviously, please replace the battery. • In the charging process, slight heating of the battery is normal. The phone can be protected automatically when the battery temperature is rising, so that control the temperature change.
battery slot completely. 4. Close rear cover of the phone. Take out the Battery 1. Make sure the phone is turned off; make sure that the charger or other equipments have been taken out from the phone. 2. Make the back of the phone upward ; push the rear cover outward to take out rear cover of the phone. 3. Find the release button at the bottom of the battery; press and pull upward the battery; take out the battery. 2.2.2 Charge the Battery 1. Make sure that the battery is installed in the phone.
2. Make the metal surface of T-FLASH card (face to the phone), insert the card in the T-FLASH card slot of the phone. Make sure that bevel angle of T-FLASH card aim at bevel angle of card slot. • Except for T-FLASH card, please don’t insert any object in T-FLASH socket. • Please don’t stick the label and other objects on T-FLASH card; slight change in T-FLASH card thickness may cause the problems of insertion and taking out; otherwise may lose data or information.
2.5.4 Phone Password Phone password can prevent others from using the phone without authorization (original phone password is 1122). • To ensure the security of your personal information, please change the original phone password in time. 3 3.1 Phone Appearance 3.2 Keystroke Function Summary of the Phone Main functions of the function keys are listed in the following table. Keystroke Function • Press and hold the key to power on or power off the phone.
In the state of electrical quantity of the battery. In the process of Ring mode battery charging, indicator bar will scroll. Signal strength of network. Receive new message. Vibration mode Ring after vibration Miss Vibration and ring ed calls. Keyboard is locked. Alarm is set.
5.1.2 Input pin code • If the phone is not set up password or SIM card is not set up password protection, the phone will search the network automatically. When the phone is registered to the internet, the network name will be shown on the screen, and then you can dial or receive a call. • If the phone is set up power-on password, the screen will prompt you to input power-on password, input correct password to power on the phone.
◆Select and open the information you need from inbox, press OK Key to enter the option, and then select Use Number to select the phone number or sender number that includes in SMS, press the option again to select Dialing or save the number. • Delete Key is used to delete the last number, press and hold the key to clear away all the inputs. • When the phone is put through, if you set up Call Time Display is on, you can see call counter on the screen.
5.3.3 Dial an International Call • When dialing an international call, replace “00” by “+”, press and hold * to input “+”. •Input the country code. • Input the area code and phone number. • Just like dialing an international call, take out “O” before the city area code when dialing. Notes: Dialing a call between different areas of some countries and regions (for example, China mainland and the Hong Kong Special Administrative Region) is the same as dialing an international call. 5.3.
◆To receive a call, press Call. ◆To refuse a call, press End. • If you have opened Incoming Call Display, calling number and Location will be shown on the screen during a call. If the number is saved in the phone book, the corresponding name of the number will be shown on the screen. • Press End to end a call. 5.3.7 Missed Call When there is a missed call, main screen will show prompt box, you can press Read to enter the list and check the missed call.
5.4 Text Input It is Chinese and English phone. The phone can not only show Chinese and English on the menu interface, but also can edit Chinese and English SMS. Making use of Chinese and English input methods, you can write and edit Chinese and English phone book. The phone provides the following input modes, in the editing interface, press # to switch the input method, press * to enter input punctuation interface. In the non-digital input method, press 0 number keys to enter a space. 5.4.
•Enter phone book function list from the menu, you can select Speed Search, Name Search, Add Numbers, Copy All, Delete, Incoming Call Group, Other Numbers, Settings, Incoming Call Photo, Incoming Call Ring tone and other functions. Speed Search Browse all the records in the phone book, also can input the contents to search rapidly. • The small icon on the left side of phone book list shows that the record is in SIM card the phone, the right side is name information of the record.
Phonebook settings 6.2 Set the phonebook location , quick dial and so on. Information The phone supports the function of sending SMS. SMS is sent to network SMS center, and then network send to the target user. If target user is not power on or can’t receive SMS, network will save the message temporarily. The period of validity of saving SMS is commonly decided by the settings of sender and service operator. • When you receive new SMS, display screen will show the prompt. Press OK Key to read SMS.
SMS Completion of SIM: After information edit is over, select the operation, you can select Send, Save and Send, Save, Send to Multi-party and Send to Group. Common phrase: Enter common phrase entry and select one insert SMS. Insert object: You can enter Insert Picture, My Pictures, Preset Motion, My Motion, Ring tone, My Ring tone and Preset Rhythm. Text format: It can enter and select Text Size, Font, Align and Paragraph. Insert phone number: Insert required number from SIM card or the phone.
need to press two keys and dial the number. • Use Number Key 2-9 to show different phone number. In the standby mode, press certain number of 2-9 Number Key to dial out the corresponding number, if the number key is not set number, it will show the prompt menu of « unsaved speed dial . • When setting up speed dial, select Speed Dial and enter Phone Settings of Setting Menu.
Option Last Explanation Call Charge All Call Charge Check the last call charge. Check all the call charges. Call Charge Clean the call charge record. Return-to-zero Charge Limit Price and Rate 6.5 Check the maximum call charge. Check and set up call charge unit. Silent mode In the standby mode, press and hold the key to switch between current scene mode and mute mode. 6.
My blue tooth 6.7 Unit information Mms 6.7.1 Mms MMS is a network service, you need apply for ISP firstly, to send and receive MMS. The handset support MMS function. MMS is the multi media short message which include, picture, sounds and text. The MMS you sent will first sent to MMS center then , the MMS center will send it to receiver, if the receiver not power on the handset or not possible to receive the MMS, the center will keep the MMS first, the time range will depends.
Can be read and edit the default MMS, also can Default MMS be generated from the model of MMS. setting 6.7.2 Setting some files of MMS. Voice Inbox Voice inbox is a kind of service provided by network operator, you may apply for opening the service. You can divert the call to voice inbox service center, the caller can leave a voice message; you can dial the voice inbox service center number and listen to the message at any time.
Read SMS Read the received cell broadcast. Language Select the language shown in cell broadcast. Select: Conduct switching operation on standby cell broadcast Channel Settings channel so that filtrate the cell broadcast that doesn’t need to receive. Newly added: Add cell broadcast channel, and then set up Channel Name and Numbering. Edit: Set up current standby channel. Delete: Delete cell broadcast channel. 6.8 Multimedia 6.8.
Mode Special Effect Settings Picture Box Storage Path Restore Settings 6.8.2 Select special effect to conduct special effect processing on the photo. Add different picture boxes to the photo. Select to save to the phone or memory card. Restore the camera settings to default settings.
Notes: MP3 files should be placed in the directory of “Memory Card/ my music”, and then can be shown in the music list. • When listening to the music, please select moderate volume. It may impair your hearing if you use high volume continuously. • In the music player interface, press Up Navigation Key to Play and pause;press Down Navigation Key to stop, press Left Navigation Key to previous song, press Right Navigation Key to next song.
6.8.4 Video player The built-in video player is used to browse or process the video files saved in the player, including video, MP4 files, and etc. Notes: Video files can be played normally if placing in “Memory Card /video” file folder. • When listening to video music, please select moderate volume. It may impair your hearing if you use too high volume continuously.
Transport files 6.8.6 Make transport files to profiles .MMS and Bluetooth. Photo book Browse and set up your photos in photo list. You can select Check, Browse Mode, and Send, Rename, Delete, Delete All Files, Sorting, Storage Path and other operations. Option Explanation You can select to send the photo to Wallpaper, Send Screen Saver, Power-on Motion, Power-off Motion and Phone Book. Storage Path 6.9 You can select to save to the Phone or Memory Card. Organizer 6.9.
and life, arrange and record the future proceedings. When time is arrived in the preset proceeding, the phone will give an alarm to remind you to complete the prearranged proceedings. When the current schedule is empty, you can add to increase the schedule arrangement; when the schedule is not empty, press Left Function Key to see the following menu options: Browse, Add, Edit, Delete Record, Delete All, Send Calendar. Browse: Check current selected schedule contents. Add: Create new schedule.
Press Right Function Key to exit from the calculator, press Left Function Key to check the results. 6.9.3 file manager Conduct the management on your files in the menu. Notes: Video files, audio files and pictures should be saved in T-flash. Option Explanation Open Open one designated data folder. Build Data Folder Format Remove 6.9.4 Newly build one data folder. Format the file. Notes: After the format, you will lose all the data saved in the file system. Remove the memory card.
6.10.1 Activate Activate the mode you have setted. 6.10.2 Personal Settings Option Explanation Ring Conduct the settings on Incoming Call of SIM , Alarm, Settings Power on/Power Off, SMS of SIM Volume Set up volume of Ring and Key Tone. Provide Ring, Vibration, Vibration and Ring, Ring after Ring Vibration and other incoming call prompt types for your Method selection. Ring Select Ring Once, Ascending and Ringing.
Language Preferred Input Method Select the language shown on the phone. Defined default input method. Conduct the settings on Wallpaper, Screen Display characteristic Saver, and Power on Motion and whether to show date and time, the phone number and service operator, and download more standby pictures from the internet. Auto Update Time Sky menu setting Hand writing setting Other settings Enable or disable to control auto update time.
phone without your permission. When you close the function, you must input PIN code first. Phone Lock When the function is on, you must input phone security password when the phone is power on. Notes: Factory original password of the phone is 1122.
the local website to active the WAP and GPRS function before use. Option Introduction Homepage Go to home page you set. Book mark Run internet with your book mark History Run internet with history record record Save Homepage homepage Input the have save the phone . Input the web address. address Service inbox you You can get the newest news and setting from the service provider. Organize the files :the handset had make the right set-up as default setting.
power on. The phone is not responded for several minutes • Press End. • Take out the battery and install again, and then power on again. Phone menu is difficult to read • Clean the screen. • Enable the backlight. • Please use the phone according to the suggested using conditions. The phone will power off automatically • Please check whether the keyboard is locked when it is not used. • Check electrical quantity of the battery. • Please check whether the backlight is on all the time.
• Please try again in another place. • Please consult your network service provider and confirm the coverage area of network. • Please consult your network service provider to confirm your SIM card is effective. • Try to select network manually. • Please try again later if network is too busy. SIM card error • Please make sure to insert SIM card correctly. • Lease consults your network service provider whether your SIM card is compatible 3V. Old 5V SIM card can’t be used.
• Please make sure that you don’t set up outgoing call barring. Caller name is not show when receiving an incoming call • Please consult your network service provider and check whether you have ordered the service. • The phone has cancelled his /her phone number. Sound quality is not so good during a call • You can make an adjustment using the side key during a call. •。Check the wireless signal.
Photo is too dark • Please check whether you set up too low photo brightness. • Whether the ambient light is too dark. Photo is too blurred •。Whether the object being taken is in motion. • Whether the phone is slightly shaking at the instant of pressing the shutter. Distortion of the photo • It is possible that the main body camera of the photo being taken is too close. Can’t Play Music • Please check whether the phone supports the song format or not (such as MMF format).
transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.