User Guide
Music
Headband
MUSIC
x1
x1
x1
Charging the Bluetooth Headband
Washing instruc�on&removal of electronics
-4-
MUSIC
LED Status Color
Red:Charging
Blue:Fully Charged
USB PC
or
Please note that you MUST remove the control panel & speaker before washing your
Bluetooth Headband
How to Removing the control panel & speakers
Step 1 The control
panel is held in a pocket
between a double layer
inside the Headband.You
can gently ease the control
panel out of its pocket.
Step 2 You will see a
small opening at the
rear of the Bluetooth
Headband
ease the control panel
towards this opening.
Step 3 Repeat step 1
speaker located at the
opposite side of
the Bluetooth Headband.
Precau�ons
Do not expose Headband to liquid or moisture.
Remove the Bluetooth module before washing the Headband.
Do not store the Headband near acidic or alkaline material.
Once the electronics are completely removed:
Machine wash cold,air dry (Do NOT tumble dry).
Made in China
滚滚长江东逝水
Volume Down / Previous Track
LED Status Light
Answer / Siri
Volume Up / Next Track
Charging Port
At a Glance
Features
Specifica�ons
Turning On/Off Bluetooth Headband
Built-in microphone for answering or calling.
Universal micro-USB cable.
MUSIC
MUSIC
Press and Hold for 4 Seconds
-2-
Pairing Bluetooth Headband
Control
-3-
MUSIC
Music Headband
Turn on Bluetooth
on devices
Turn on
Music Headband
Connect to Music
Headband on devices
LED Status Color Meaning
Pending to be Paired
Connected to a device
connect to the last connected device if avaiable .if no previously
3s
x1
x1
x1
Play/Pause Music
Volume Up/Down
Next Track
Previous Track
Press and hold
for 3 seconds
Press once when
connected to a device
Press and hold
during music playing
Press once duning
music
playing
Press once during
music
playing
x1
x2
Answer/End
Phone Call
Siri
Press once when
phone ringing
Quickly press twice
MUSIC