Specification

INTAKE/EXHAUST VENT

FEATURES:

-Full fiberglass screening.

-Lock-On Vent Cover eliminates trim work.

-Single unit body construction of Base and Vent Cover

-J-Channel eliminated

-Snap-In Modular Vent Tube adjusts from 1 1/2" to 8".

-Finish Vent Cover adjust for siding thicknesses of 7/16" and 5/8".

-Net free area: 12 sq. in.

intake_exhaust_vent_spec.ai

Issued: 04/25/03

Revised: 08/07/07

SPECIFICATIONS:

Material: Base: UV stabilized copolymer; color molded in; .080" nominal wall

Vent Cover: UV stabilized copolymer; color molded in; .100" nominal wall

Vent Tube: UV stabilized copolymer; color molded in; .050" nominal wall

Fabrication: Base is a 6 piece molded assembly.

Vent Cover single piece molded unit.

Attachment: Screw or nail directly to any surface.

Packaging: 1 asm./ box

Dimensions: See drawing below (all dimensions in inches)

The Intake/Exhaust Vent is soffit and wall mountable. The Snap-In Modular Vent Tube adjusts

from 1 1/2 to 8" and comes with a 4"-3" reducer. The Intake/Exhaust Vent cannot be used as a dryer vent.

Dimension "A" locking positions: 7/16" and 5/8"

7 1/4"

4" to 3" Reducer

PAGE 1
INTAKE/EXHAUST VENT The Intake/Exhaust Vent is soffit and wall mountable. The Snap-In Modular Vent Tube adjusts from 1 1/2 to 8" and comes with a 4"-3" reducer. The Intake/Exhaust Vent cannot be used as a dryer vent. FEATURES: -Full fiberglass screening. -Lock-On Vent Cover eliminates trim work. -Single unit body construction of Base and Vent Cover -J-Channel eliminated -Snap-In Modular Vent Tube adjusts from 1 1/2" to 8". -Finish Vent Cover adjust for siding thicknesses of 7/16" and 5/8".