User's Manual

PY00-29008-DM20-01 1-01
Contents of Package
Thank you for purchasing BUFFALO's wireless LAN card WLI-CB-B11. The WLI-CB-B11 is installed for wireless LAN communication in computers equipped with a CardBus slot
(type II). Read this manual carefully before using the wireless LAN card to ensure correct operation.
Quick Setup Guide
WLI-CB-B11
Manual
The items listed below are included in the package. Please check the package
and contact your nearest sales representative if any items are missing.
Wireless LAN Card................................................................... 1
AirNavigator CD........................................................................1
Quick Setup Guide(this docment)............................................. 1
User registration card, warranty................................................1
Be sure to read any additional information sheets provided in the
package.
2 Select "Search for a driver automatically (Recommended)" option and
click [Next].
3 If the dialog asking search location appears, select "CD-ROM" drive and
click [Next].
*Only Windows2000 and 98SE prompts this option
4 If driver selection list appears, select suitable folder name for your system
and click [Next].
5 If Windows compatibility dialog appears, click [Continue Anyway].
6 If complete message appears, click [Finish] to close the Wizard. Some
OS might require system rebooting to activate installed driver.
1
2
3
Windows XP/2000/Me/98 Settings
1 Getting Started
2 Installing Drivers
This chapter describes how to make the settings for connecting your Windows
XP/2000/Me/98 computer to a wireless LAN.
The wireless LAN adapter setup
procedure begins with setting of the
AirNavigator CD. First, insert the CD into
the CD-ROM drive of your PC. Then,
proceed to the next step 2, “Installing
Drivers.”
If your computer has only one PC card slot
If the CD-ROM drive is connected via the PC card to a computer with only
one PC card slot, the CD-ROM drive and this wireless LAN card cannot be
used at the same time. Execute the following steps before installing the PC
card driver.
1 Connect the CD-ROM drive to the computer.
2 Insert the "AirNavigator CD" into the CD-ROM drive.
3 Create a new folder (directory) on the hard disk, and copy all files from the
CD-ROM to that folder.
4 Double-click the "Setup" icon ( ).
Choose "Install Wireless Adapter"
and then click "OK".
The drivers will be copied to your
PC, and the on-screen instructions
will appear. (*)
Chose "Install Client Manager" and
click "OK".
If the window shown above
is not visible, it may be behind an-
other window. In this case, close
the other window.
Click [Exit], and proceed to the next step 3, Connecting to Network.
(*) If the "Found New Hardware Wizard" or "Add New Hardware Wizard"
appears, please proceed the following instruction. The WindowsXP screen
shots are used for example.
1 In the case of Windows2000 and 98SE, click [Next].