HD-PZNU3 User Manual www.buffalotech.com 35020740-01 2015.
Contents LEDs and Connections.....................................................2 Specifications...................................................................3 Software Installation.......................................................3 Recommended Usage.....................................................4 Warning.............................................................................................4 Dismounting the Unit.......................................................................
LEDs and Connections 1 Power/Access LED Power On : white Accessing : blinking white When HD-PZNU3 Is In an Encryption Mode Locked : Orange 2 USB Cable 3 USB Connector 2
Specifications Check Buffalo's website (www.buffalotech.com) for information about the latest products or compatible models. Interface Connector Transfer speed External dimensions Power Compatible OS USB 3.0 USB 3.0 Micro-B 5 Gbps Maximum (USB 3.0) * 90 x 141 x 21 mm; 3.5" x 55.5" x 0.8" (excluding protruding parts) 5 V ± 5% Windows 8.1 (64-bit or 32-bit) Windows RT 8.1 ** Windows 8 (64-bit or 32-bit) Windows RT ** Windows 7 (64-bit or 32-bit) Windows Vista (64-bit or 32-bit) OS X 10.10, 10.9, 10.
Recommended Usage Warning To avoid damage to data, never do any of the following while data is being accessed: - unplug the cables - turn off your computer - put your computer into standby, hibernate, or sleep mode Never configure this unit as a destination for virtual memory. The maximum size of a file on a FAT32 drive is 4 GB. To work with larger files, reformat the drive with NTFS or Mac OS extended. Some computers may not recognize this device at boot.
Some computers may display a delayed write when they return from an energy-saving state. If this happens, unplug the unit before putting your computer into the energy-saving mode. This drive may become hot during use. This unit is designed to release heat through its case. The surface of the case may become quite hot in normal use. Even when the unit is off, the case may still be warm from standby current.
Troubleshooting I can see the MiniStation in Computer (PC) but I cannot access it The drive may require formatting. Try using DiskFormatter2. Diskformatter2 and the manual are available from http://d.buffalo.jp/hd-pznu3/. I cannot see the MiniStation Verify that the power LED is on. If it is not, check the cable! The MiniStation should be connected to your computer by a USB cable. Check that both ends are correctly plugged in. Verify that the hard drive inside the MiniStation is spinning.
Regulatory Compliance Information The information below is only for US and Canada region. Only use the cables and accessories that are included in the package. Don't use other accessories or cables unless specifically instructed to in the documentation. Company Information Buffalo Americas, Inc.
IC statement (IC déclaration) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
