Instruction Guide

True wireless bluetooth headset
TWS
S3
Instructions
Summary
Thank you for choosing our product, the design of
our Bluetooth headset.Stylish, powerful and
compatible, let you really experience wireless.
Le Shang, who calls and listens to music! You work,
go out and drive.Best choice!
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to thefollowing two conditions:
(1) This device may not cause harmful interference,and
(2) this device must accept any interference received,
including interferencethat may cause undesired
operation.Any Changes or modifications not
expressly approved by the party responsiblefor
compliance could void the user's authority to operate
the equipment.This equipment has been tested and
found to comply with the limits for a ClassB digital
device, pursuant to part 15 of the FCC Rules.
These limits are designedto provide reasonable
protection against harmful interference in a
residentialinstallation. This equipment generates uses
and can radiate radio frequencyenergy and,
if not installed and used in accordance with the
instructions, maycause harmful interference to radio
communications. However, there is noguarantee
that interference will not occur in a particular
installation.
If thisequipment does cause harmful interference to
radio or television reception,which can be
determined by turning the equipment off and on,
the user isencouraged to try to correct the
interference by one or more of the
followingmeasures:-Reorient or relocate the
receiving antenna.-Increase the separation
between the equipment and receiver.-Connect the
equipment into an outlet on a circuit different
from that to which thereceiver is connected.
-Consult the dealer or an experienced
radio/TV technician for help.The device has been
evaluated to meet general RF exposure requirement.
Thedevice can be used in portable exposure condition
without restriction.
FCC ID:2A2GO-S3
With Bluetooth wireless technology, you can connect
headphones without using cables.Connect the
compatible communication equipment. Bluetooth
wireless connection does not require holding hands.
It is opposite to the headset, but the maximum distance
between them should not exceed.After 10 meters
(about 30 feet), the Bluetooth wireless connection may
be blocked by walls and other obstacles.Or other
electronic devices.
Wireless technology
In some areas, the use of Bluetooth wireless technology
may be limited,Please consult local authorities or
service providers.
Product schematic diagram
Left earphone
Right earphone
Charging bin
Electric quantity display lamp
TYPE-C charging port
Charging bin button
7.Headset lamp/
noise reduction microphone
8.Multifunctional touch position
9.Headphone charging piece
10.Microphone hole
11.telephone receiver
Product parameter
Bluetooth version
Transmission distance
Frequency response
Output sensitivity
Microphone sensitivity
Battery capacitys
Impedance
Rated power
Driving unit
Charging voltage
Playback time
Standby time
Charging time
Net weight of product
V5.3
10 meters
20~20KHz
105dB
-42dB
400mAh
32
10mW
Ø13mm
5V
About 7 hours
About 40 hours
About 1.5 hours
35.8g
Charging headphones
1.Before using the Bluetooth headset for the first
time, the battery must be fully charged.
2.When charging, the white light is always on,
accompanied by a white light flashing.
3.The headset is fully charged, which takes about 1 hour.
4.When it is fully charged, the white light will turn on.
Basic operation
open:
Open the charging compartment cover, and turn
on the white light of headphones for about 1 second.
Search equipment:
After the headset is turned on, it flashes slowly
and turns off the light.
Bluetooth pairing:
Please make sure the phone supports Bluetooth
and turn on Bluetooth.Switch, select "budi S3"
from the Bluetooth list of the mobile phone.
Pairing, pairing is successful, and the earphone
light goes out.
close:
Put the left and right headphones into the charging
compartment, and cover the box; orDisconnect
the Bluetooth device and turn it off automatically
for 180 seconds.
answer a call:
Press the touch buttons of the headphones on
either side. Figure 8 Position.
End the call:
Press the touch buttons of the headphones on
either side. Figure 8 Position.
Refuse to answer the phone:
Press the touch of headphones on either side for
1-2 seconds.
Voice assistant:
In the standby/music mode, press 3 times on
either side.Touch the button of the headset to
activate (example:Siri of Apple's mobile phone.
Clear pairing information:
When there is no Bluetooth connection, press and
hold either side.8 seconds until the white light flashes.
Play/pause music:
Press the headset touch button on either side to play,
Press again to pause.
Last song:
Press and hold the touch button of the left earphone
for 2 seconds.
Next song:
Press and hold the touch button of the right
earphone for 2 seconds.
Note:
(When using one-sided headphones, press and hold
the touch buttons of the left and right headphones.
All are the next operation).
Electric quantity display function:
Display the headset power on IOS system, so that
Consider whether to charge headphones.
Low alert:
The headset will give a reminder tone every 5 minutes.
There are three times in total.
Headset charging:
1. When the power of the headset is insufficient,
the headset will sound a prompt.
2. Put the headphones back into the charging
compartment and close the cover to charge them.
When the headset is charged, the white light is
always on, and the full-charge white light goes out.
Charger and battery:
Before using any charger to charge this charging bin,
please check the charging first.
Whether the specification of the electrical appliance
meets the requirements (suggested charger
specificationDC 5V /1A), too high charging voltage
is likely to damage Bluetooth.Headphones.
Matters needing attention:
1. Please follow the instructions of this manual.
2. Do not use the charger whose output specification
exceeds 5V/1A for this product.Charge the product,
otherwise it will easily damage the battery of the
product.
3. Do not use this product near the heat source,
such as radiator and hot air conditioner.Section,
stove or other instruments that generate heat.
4. When using headphones, be sure to turn them
to a moderate volume. Avoid damage
Hurt your hearing.
If this product is damaged for any reason, it must
be branded with me in time.After-sales contact
and handling.
6. Please use and store this product at room
temperature.
Warm tip:
The effective warranty period of this product is one
year from the date of sale, and it is under warranty.
Under the condition of normal use and maintenance
within the repair period, the machine itself
Material and function problems, failure, the
investigation is true, this public.
Division will provide free repair and replacement parts.
The warranty of this headset does not apply to:
A. The headset has expired the warranty period;
B. The user fails to follow the requirements of the
instruction guide, resulting in broken headphones
and broken shell;
C. Disassemble, repair and change the structure
without the authorization of our company;
D. Unable to provide warranty card and consumption
voucher;
E. product failure or damage caused by natural disasters
and other force majeure (such as earthquake and fire);
Note: the
warranty service does not include the
transportation cost of the product and does not
provide on-site repair service.
The right to interpret this warranty belongs to BUDI.
Warranty feedback form (check):
A.Headphones have no sound.
B.Deterioration of sound quality
C.Keys cannot be operated.
D.Unable to align the device.
E.Unable to charge.
F.Other_________________
User purchase time:______________________________________
Purchase dealer:________________________________________
Time of problem occurrence:_______________________________
User contact information:__________________________________