RF Beacon V3 User Manual 1.10 Version: 04-11202130-0514 1 of 7 Date: Page: RF Beacon V3 User Manual Date: 04-11-2021 Version: 1.
RF Beacon V3 User Manual Version: Date: Page: 1.10 04-11202130-0514 2 of 7 DOCUMENT HISTORY Version Date Author 1.0 04-11-2021 B Buike Description First Release REFERENCED DOCUMENTS Ref. Document Name Version Date COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd.
RF Beacon V3 User Manual Version: Date: Page: 1.10 04-11202130-0514 3 of 7 CONTENTS 1. 2. 3. 4. 5. Introduction .................................................................................................................. 4 Equipment Description ................................................................................................. 4 RF Beacon V3 Installation ............................................................................................. 5 RF Beacon V3 Operation ............
RF Beacon V3 User Manual Version: Date: Page: 1.10 04-11202130-0514 4 of 7 1. Introduction This document is intended to be the source reference material for using the RF Beacon V3 product, with the exception of electronic configuration (including set-up and interaction with the Smart Tag and on-line monitoring portal). The emphasis here is upon describing the physical features, power source, and correct installation or removal. 2.
RF Beacon V3 User Manual Version: Date: Page: 1.10 04-11202130-0514 5 of 7 3. RF Beacon V3 Installation The RF Beacon V3 should be plugged into a fixed power socket in the home of the wearer. A red light on the end of the device will indicate that the unit is powered and working. The device will not require any servicing, control, adjustment or maintenance during the period of installation. Once installed it should remain in place for the duration of the wearer’s time with the Smart Tag.
RF Beacon V3 User Manual Version: Date: Page: 1.10 04-11202130-0514 6 of 7 5. RF Beacon V3 Collection / Inspection / Cleaning 5.1. Collection When collecting an RF Beacon V3 from a subject, protective gloves should be worn. Note any obvious sign of damage. Return the RF Beacon V3 to the vehicle for inspection and cleaning. 5.2. Inspection The RF Beacon V3 should be inspected for signs of damage, units with damage should be dealt with in accordance with local protocols.
RF Beacon V3 User Manual Version: Date: Page: 1.10 04-11202130-0514 7 of 7 6. FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
RF Beacon V3 User Manual Version: Date: Page: 1.10 04-11202130-0514 8 of 7 7. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.