User's Manual

ManualsBrandsBuddi ManualsElectronicsRF Beacon

User Manual-RF Beacon

Version:

1.1

Date:

30-05-14

Page:

1 of 6

Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE.

COMMERCIAL IN CONFIDENCE

User Manual-RF Beacon

[Not Set]

Date:

30-05-14

Version:

1.1

Owned by:

Richard Watson

Mechanical Engineer

Prepared by:

Richard Watson

Mechanical Engineer

Checked by:

Vishal Nayar

Business Development Director

Approved by:

Charles Lewinton

Head Of Engineering

COMMERCIAL IN CONFIDENCE

The material contained in this document may not be copied, published, transmitted, reproduced or

disclosed, in whole or in part without the prior written permission of buddi Ltd.

Summary of content (6 pages)

PAGE 1
User Manual-RF Beacon 1.1 30-05-14 Version: Date: Page: 1 of 6 User Manual-RF Beacon [Not Set] Date: 30-05-14 Version: 1.
PAGE 2
User Manual-RF Beacon Version: Date: Page: 1.1 30-05-14 2 of 6 DOCUMENT HISTORY Version Date Author 1.0 07-04-14 R.Watson Description Initial Issue REFERENCED DOCUMENTS Ref. Document Name Version © buddi Ltd 2012 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE.
PAGE 3
User Manual-RF Beacon Version: Date: Page: 1.1 30-05-14 3 of 6 CONTENTS 1. 2. 3. 4. 5. Introduction ............................................................................................................... 4 Equipment Description .............................................................................................. 4 RF Beacon Installation ................................................................................................ 5 RF Beacon Operation .................................
PAGE 4
User Manual-RF Beacon Version: Date: Page: 1.1 30-05-14 4 of 6 1. Introduction This document is intended to be the source reference material for using the RF Beacon product, with the exception of electronic configuration (including set-up and interaction with the Smart Tag and on-line monitoring portal). The emphasis here is upon describing the physical features, power source, and correct installation or removal etc. 2.
PAGE 5
User Manual-RF Beacon Version: Date: Page: 1.1 30-05-14 5 of 6 3. RF Beacon Installation The RF Beacon should be plugged into a fixed power socket in the home of the wearer. A red light on the end of the device will indicate that the unit is powered and working. The device will not require any servicing, control, adjustment or maintenance during the period of installation. Once installed it should remain in place for the duration of the wearer’s time with the Smart Tag.
PAGE 6
User Manual-RF Beacon Version: Date: Page: 1.1 30-05-14 6 of 6 5. RF Beacon Collection / Inspection / Cleaning 5.1. Collection When collecting an RF Beacon from a subject protective gloves should be worn.  Note any obvious sign of damage.  Return the RF Beacon to the vehicle for inspection and cleaning. 5.2. Inspection The RF Beacon should be inspected for signs of damage, units with damage should be dealt with in accordance with local protocols.