6170 BT Prelude 20 UG [2] 14/6/04 3:31 pm Page 1 BT Prelude 20 Headset – Edition 2 – 14.06.
6170 BT Prelude 20 UG [2] 14/6/04 3:31 pm Page 2 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 2 Welcome… to your BT Prelude 20 Headset Make handsfree phone calls from your BT Prelude Bluetooth phone. Light and comfortable to wear. Durable construction. Battery low warning beep. This User Guide provides you with all the information you need to get the most from your headset. You must first set up your headset before you can use it. Just follow the simple instructions on the next few pages.
6170 BT Prelude 20 UG [2] 14/6/04 3:31 pm Page 3 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 Getting started Range Once paired with a Bluetooth phone/device, your BT Prelude 20 Headset has a range of 10 metres. If you go outside this range, the signal between the phone and headset will be lost. Charge the headset battery for 21/2 hours 1. Plug the Charger into your BT Prelude 20 Headset. Plug the other end into the mains power and switch on. 2. During charging the red charger light comes on.
6170 BT Prelude 20 UG [2] 14/6/04 3:31 pm Page 4 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 4 Getting started Get to know your headset On/Off Switches headset on/off. Earphone Microphone Indicator light Volume up Increase earphone volume during a call. Earphone socket Charging socket Volume down Decrease earphone volume during a call. Clip Lets you clip the headset unit to a shirt or blouse.
6170 BT Prelude 20 UG [2] 14/6/04 3:32 pm Page 5 BT Prelude 20 Headset – Edition 2 – 14.06.
170 BT Prelude 20 UG [2] 14/6/04 4:07 pm Page 6 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 6 Pairing Before using your BT Prelude Headset, you must ‘pair’ it to a Bluetooth phone or other compatible device. 1. Make sure your BT Prelude headset battery is fully charged. 2. Make sure your headset is switched off. 3. Press and hold the button until the light flashes green and red alternately (after about 6 seconds). Your headset is now in pairing mode and will remain so for 1 minute. 4.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 7 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 Pairing If pairing with another phone: Follow the steps shown in your Bluetooth phone’s user guide to start Bluetooth pairing. On the phone, confirm pairing. 5. If your phone asks for a passkey or PIN, enter 1111 (this is the default passkey for your BT Prelude 20) and confirm. 6.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 8 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 8 Using the headset Important Before using your headset, it must be paired with a Bluetooth phone/device. You must also be within 10 metres of the paired Bluetooth phone/device. Connecting with other Bluetooth devices Once paired and switched on, your BT Prelude 20 headset will automatically link with your BT Prelude phone when it is within range.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 9 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 Using the headset Switch headset off 1. Press and hold on the headset until the red light flashes and the headset beeps. Make a call 1. Use your phone to dial the number as normal. When the line is open, you will hear the call through your headset. Answer a call 1. When the phone rings: press on your headset to answer the call. Adjust volume 1.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 10 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 10 Using the headset Secrecy During a call, you can talk to someone nearby without your caller hearing you. 1. During a call: On your BT Prelude phone press . Or On the headset press and hold 6 seconds. 2. To resume your call, press or on your BT Prelude phone or End a call 1. Press the for about button on your headset. on your headset.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 11 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 General information Important This equipment is not designed for making emergency telephone call when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom. Safety Only use the power supply included with the product.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 12 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 12 General information Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals. Cleaning Simply clean the headset and charger with a damp (not wet) cloth, or an anti-static wipe. Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 13 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 General information There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the power and telephone line cord from the base for the duration of the storm. Guarantee Your BT Prelude 20 Headset is guaranteed for a period of 12 months from the date of purchase.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 14 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 14 General information The conditions of this guarantee are: ■ The guarantee shall only apply to defects that occur within the 12 month guarantee period. ■ Proof of purchase is required. ■ The equipment is returned to BT or its agent as instructed.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 15 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 General information Outside of the 12 month guarantee period: If your product needs repair after the guarantee period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you contact BT’s approved repair agent, TecLogic on 01672 564444 or a local qualified repairer.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 16 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 16 Technical information How many telephones can you have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any other telephone line. Your BT Prelude phone has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the telephone may not ring.
6170 BT Prelude 20 UG [2] 14/6/04 3:34 pm Page 17 BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170 Visit us at www.bt.com Offices worldwide The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2004.