Download Bryton Mobile App 快速使用指南 www.brytonsport.
Charge your Rider 420 Connect Rider420 to a PC to charge the battery for at least 4 hours. Unplug the device when it is fully charged. may see a white screen when the batteryis really low. Keep the decice plugged for several minutes, • You it will automatically turn-on after battery is properly charged. • The temperature suitable for charging battery is 0 C ~ 40 C. Beyond this temperature range, chargeing o o will be terminated and the device will draw power from battery.
Key Functions B A PAUSE/ BACK POWER/ BACKLIGHT A. Power/Backlight ( D PAGE ) Press to turn the device on. Press to turn on/off the backlight while the device is on. Long Press to turn the device off. B. BACK ( ) In Cycling mode, press to enter Menu page. In Menu, press to return to the previous page or cancel an operation. When recording, press to pause recording and enter the Menu. C. OK/LAP ( ) In Menu, press to enter submenu or confirm a selection. In Cycling mode, press to start recording.
Getting Started 1. 2. 3. 4. Language English Deutsch Francais Italiano Español Please charge your device for at least 4 hours before the first use. To begin 1. Press to turn on the device. 2. Press to select the display language and press to confirm the selection. 3. Press to select the unit and press to confirm the selection. 4. Device will automatically search for satellite signals. 5. After GPS signal is fixed *,( → ) just ride on and enjoy your workout in free cycling mode.
Follow Track With the Follow Track feature, you can plan trips via Bryton Active App, use pervious rides from History or download gpx tracks online. Plan Trip via Bryton Active App 1. Download Bryton Active App. 2. Sign up / log in on Bryton Active App. 3. Select “Course” > “Plan Trip” to set Start point and Destination by tapping on the map or input address in left Search Bar. 4. Download the planned trip to "My Route" by tapping the Arrow icon . 5.
Icon Description / Bike 1/2 Heart Rate Sensor Active Power Meter Active No Signal (not fixed) Cadence Sensor Active Log Record in Progress Weak Signal (fixed)/ Strong Signal (fixed) Speed Sensor Active Recording is paused Power Status Dual Sensor Active / Current speed is faster/slower than average speed Note: ● For Firmware Update, please go to www.brytonsport.com> (Menu) > Support > Download. ● For Video Instructions, please go to www.brytonsport.com> (Menu) > Support > Tutorial.
Specifications Item Description Display 2.3” FSTN positive transflective dot-matrix LCD Pysical Size 83.9 X 49.9 X 16.9 mm Weight 61g Operating Temperature -10°C ~ 60°C Battery Charging Temperature 0°C ~ 40°C Battery Li polymer rechargeable battery Battery Life 35 hours with open sky ANT+™ www.thisisant.com/directory for compatible products. GNSS Integrated high-sensitivity GNSS receiver with embedded antenna BLE Smart Bluetooth smart wireless technology with embedded antenna 2.
Appendix Mount Rider 420 to the Bike 1 2 3 4
RF Exposure Information (MPE) This device meets the EU requirements and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) on the limitation of protection. To comply with the RF exposure requirements, this equipment must be operated in a minimum of 20 cm separation distance to the user. Hereby, Bryton Inc. declares that the radio equipment type Bryton product is in compliance with Directive 2014/53/EU.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Industry Canada Statement This device complies with Industry Canada RSS-247 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
