0.
Brydge 10.2 MAX+ User Manual POWER TO TURN ON: Press the power key for one second until the LED flashes green. TO TURN OFF: Press and hold the power key for three seconds until the LED flashes red. NOTE: To conserve battery, your Brydge will enter sleep mode after 20 minutes of non-use. Press any key to turn back on. Your Brydge will enter sleep mode when both devices are closed like a laptop. PAIR TO PAIR: Press and hold the BluetoothTM key for three seconds until the LED flashes blue.
INSERT/REMOVE KEYBOARD IMPORTANT Before attaching your keyboard, ensure your iPad is inserted into the supplied protective case. BEFORE INSERTING: Place your Brydge on a flat surface and set the hinges upright to 90 degrees. TO INSERT: Insert your iPad (in protective case) into the hinges with the home button on the left. TO REMOVE: Place your Brydge on a flat surface. Place your hand towards the back of the keyboard and pull up.
Brydge 10.2 MAX+ Mode d’emploi ALIMENTATION POUR ALLUMER : maintenez la touche marche/arrêt enfoncée pendant une seconde jusqu’à ce que la DEL clignote verte. POUR ÉTEINDRE : maintenez la touche marche/arrêt enfoncée pendant trois secondes jusqu’à ce que la DEL clignote rouge. REMARQUE : pour préserver la charge de la batterie, votre pavé tactile sans fil Brydge entrera en mode veille après 20 minutes d’inactivité.
INSÉRER / RETIRER LE CLAVIER IMPORTANT Avant de fixer votre clavier, assurez-vous que votre iPad est inséré dans l’étui de protection fourni. AVANT DE INSÉRER : Placez votre Brydge sur une surface plane et réglez les charnières à la verticale à 90 degrés. POUR INSÉRER : Insérez votre iPad (dans l’étui de protection) dans les charnières avec le bouton d’accueil sur la gauche. POUR RETIRER : Placez votre Brydge sur une surface plane. Placez votre main vers l’arrière du clavier et tirez vers le haut.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.