BRUNSWICK SYNC TABLET OPERATION MANUAL 57-501587
IMPORTANT SAFETY INSTRUCTIONS CAUTION: Any changes or modifications to this equipment could void the product warranty. DANGER: To reduce the risk of electrical shock, always unplug this Brunswick product before cleaning or attempting any maintenance activity. WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet.
Installation: 1. Back view a. Assemble the transfer board into the socket of the pedestal. b. The network cables and power wires go through the stem of the pedestal. c. Connect the network cables from network router to the RJ45 sockets on the transfer board. d. Connect the power wires from the power supply to jacks CN1,CN2 on the transfer board.
2. Front view a. Put the Sync tablets into the trays of the pedestal. b. Connect the cables from tablets to CN3, CN4 on the transfer board.
Tablet: 1. Outline Camera Touch panel 2. Specification Dimension: 253.6mm*202.7mm*24mm Power supply: DC 12 -13.5 V 1.5A Screen: 10.4 inch Camera: 0.2 Megapixels Resolution: 1280 x 1024 pixels 3. Turn on/ Turn off a. Supply AC power to the pedestal, the tablet will automatically turn on. b. Disconnect AC power to the pedestal, the tablet will be turned off. 4. In the main menu, choose the APK to operate.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.max SAR value(0.