GET STARTED
WELCOME TO BODY FURNACE® Thank you for purchasing the Body Furnace with Bluetooth Wireless Technology. With app-enabled custom heat settings, Body Furnace represents the next generation of personal heating technology. Body Furnace uses patented reflective heat technology to direct heat to your core, allowing your body to maintain a stable temperature and keep your extremities warm.
PACKAGE CONTENTS • • • • • Body Furnace Heating Unit Universal Strap USB Wall Charger USB Cord Instruction Booklet Things you need to know before using the Body Furnace. • Maintaining a comfortable heat level is easy with the use of the Body Furnace personal app. • Do not use directly on skin. Always wear Body Furnace over a thin insulating layer. • For best results, turn Body Furnace on before going outdoors. • Only use the charging unit included with the device.
FIRST TIME POWER-ON APP MODE Begin by downloading smart phone app and pairing the Body Furnace with your smart phone. Ensure the Body Furnace unit is ready for pairing by following the steps to power-on in manual mode. BLUETOOTH Hold 5 seconds while off. Repeat until connected.
FIRST TIME POWER-ON MANUAL MODE USING THE BODY FURNACE ON-UNIT CONTROLS To operate the Body Furnace without the use of Bluetooth® technology, use the control button located on the front of the Body Furnace unit. While the unit is off, press and hold the control button for 2 seconds until the blue light illuminates. Release the button and press again to cycle through 3 temperature modes.
USING UNIVERSAL STRAP First, pull one end of strap through one loop on end of Body Furnace. Press gently to keep strap closed and in place. Wrap the universal strap around back holding Body Furnace on your core.
USING UNIVERSAL STRAP Pull strap through second loop and adjust fit by pulling both strap ends outward then back until the strap fits comfortably. Press firmly on the hook and loop tabs to ensure a firm hold.
ADJUSTING HEAT - IN APP METHOD Once your smart device is paired with the Body Furnace use the arrows or the control wheel to customize your heat settings.
ADJUSTING HEAT - ON-UNIT METHOD While the unit is off, press and hold the control button for 2 seconds until the blue light illuminates. Release the button and press again to cycle through 3 temperature modes.
RECHARGING AND STORAGE Recharging is simple. Insert charge cable USB into charging adapter. Insert the other end of the charge cable into the charge port located under the logo on the front of the unit. Store Body Furnace in its original packaging in a cool, dry place.
USING THE BODY FURNACE BLUETOOTH APPLICATION To operate the Body Furnace with Bluetooth®, you will need to use the Body Furnace app. You can download this from the Apple App Store or the Google Play App Store. The app is compatible with these Apple® devices running iOS 9 or newer: iPhone® 5, iPod touch® 5th Gen., or newer versions of these devices. It is also compatible with leading Android™ devices. Using the Bluetooth® feature BEFORE YOU BEGIN: 1.
USING THE BODY FURNACE ON-UNIT CONTROLS To operate the Body Furnace without the use of Bluetooth® technology, use the control button located on the front of the Body Furnace unit. While the unit is off, press and hold the control button for 2 seconds until the blue light illuminates. Release the button and press again to cycle through 3 temperature modes.
LITHIUM-ION POLYMER BATTERY INFORMATION. The high quality Lithium-Ion Polymer batteries can be fully recharged well over 500 times. Only use the included Body Furnace charging devices to charge the batteries. Batteries must be disposed of in accord with local laws and regulations. Charge Time: The Body Furnace batteries are designed with Quick Charge technology and will fully charge in 4 hours or less. Charging and recharging batteries The Body Furnace must be fully charged before first use.
CARING FOR THE BODY FURNACE •S tore the Body Furnace and accessories in a clean and dry place. •C harge batteries fully before long-term storage. Recharge the batteries every few months to maintain peak performance. •D o not damage the heating elements by excessively bending the Body Furnace unit. •C lean with a damp cloth only. Do not use chemicals or cleaning agents. •D o not submerge in water. Body Furnace has a water resistant coating, but cannot be submerged in water and is not waterproof.
CAUTION: Be aware of burn possibilities. Properly use the Body Furnace according to instructions. Users of the Body Furnace need to be aware of early sensations of a burn, including when an area of skin becomes hot, or when any area of your skin feels like you are being pricked or pointed with a sharp object and may or may not feel hot. If you feel the early warning of a burn, immediately discontinue use of the Body Furnace and make certain your skin is not at risk of being burned.
WARNING: Lithium-ion Batteries and/or products that contain Lithium-ion Batteries can expose you to chemicals including cobalt lithium nickel oxide and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Battery Specifications: 11.1V 2200 mAh 24.42 Wh Please visit https://www.tsa.
Limited Warranty: Brownmed warrants all products to be free of manufacturing defects. Each product is intended for use by a single patient. Body Furnace Accessories Accessories available for the Body Furnace include extra charging blocks, charge cables and the adjustable strap. Contact Brownmed at 1-877-853-5518 or visit www. brownmed.com for customer service contact information. If you have further questions regarding the Body Furnace: • Call Customer Service at 1-877-853-5518 • Refer to www.brownmed.
RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
US Pat. 7,564,009 B2 RM06202 Rev.
