Product Card

CELLULAR SETUP

Download the Strike Force Wireless app from the App Store or Google

Play on your mobile device. Set up an account on the new App. From

the App, select “Setup New Camera”. This will bring up a QR code reader.

Power on the trail camera and press the Mode button. Highlight

either ATT or Verizon as your preferred carrier. Confirm your selection.

Scan the QR Code that appears on the camera’s screen with the QR

code reader on your mobile app. This will register the camera informat ion

on your Strike Force Wireless account. Follow the App instructions

for picking your camera’s data. After 5 minutes, your camera will be set

up on the cellular network.

You can do a manual test by navigating to the LTE TEST camera menu.

This will make test communication to your account at

Strike Force Wireless.

CAMERA SETTINGS

After powering on the trail camera, press the mode button to access the avaliable

setting options. The setting options are as follows:

Set Date

Set Time

Camera Mode: Trail / Video

Capture Delay:1, 5, 10, 30 seconds, 1, 2, 5, 10, 30, 60 minutes

Picture Size: 2, 4, 8 or 20MP

MultiShot: 1-8 shots per trigger

Temperature Units: Fahrenheit or Celcius

Picture Info Strop: on / off

SD Card Management: on / off

Motion Test: Activate to test the PIR range and check setup in the field.

Camera Name: Add a custom name for your camera in tis field.

Set Default: Resets your camera to factory defaults.

Delete All: This erases and reformats your SD card.

Software Update: You can update your camera software here.

LTE Test: You can run a manual cellular test here by pressing the OK button.

PAGE 1
CELLULAR SETUP Download the Strike Force Wireless app from the App Store or Google Play on your mobile device. Set up an account on the new App. From the App, select “Setup New Camera”. This will bring up a QR code reader. Power on the trail camera and press the Mode button. Highlight either ATT or Verizon as your preferred carrier. Confirm your selection. Scan the QR Code that appears on the camera’s screen with the QR code reader on your mobile app.
PAGE 2
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not c ause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to p art 15 of the FCC Rules.