Product Safety Guide

RJ-3250WB/3230B
Product Safety Guide (English)
Be sure to read this document before using the product.
We recommend that you keep this document nearby for future
reference.
For servicing, adjustments or repairs, contact Brother Customer Service or
your local Brother dealer.
If the product operates abnormally or any dysfunction occurs, turn off the
product and disconnect each cord and contact Brother Customer Service
or your local Brother dealer.
The information provided in this document is subject to change without
notice.
Unauthorized duplication or reproduction of any or all content of this
document is prohibited.
We assume no responsibility for any damage or lost prot arising from the
use of labels created with this product, the disappearance or change of
data due to failure, repair or consumables and we do not accept any claim
from a third party.
Manuals in Spanish for this model are available at
support.brother.com.
DANGER
Failure to observe instructions and warnings could result in death or
serious injuries. Follow these guidelines to avoid the risk of heat
generation, smoking, explosion, or re.
Rechargeable Li-ion Battery
DO NOT allow the battery to come into contact with liquids.
DO NOT charge, use, or leave the battery in high-temperature
(above 140°F/60°C) locations.
DO NOT attempt to charge the battery using an unsupported charger.
Use the battery only for its intended purpose.
Keep the battery away from heat and re.
DO NOT connect the + and - terminals with metal objects such as wire.
DO NOT carry or store the battery with metal objects.
DO NOT throw, hit, or damage the battery in any way.
DO NOT solder any connections to the battery.
DO NOT disassemble or modify the battery.
DO NOT dispose of the battery with household waste.
WARNING
Failure to observe instructions and warnings could result in death or
serious injuries. Follow these guidelines to avoid the risk of heat or
smoke generation, explosion, re, or injury.
Product, AC Adapter (Optional), or Car Adapter (Optional)
If a foreign object is accidentally inserted into any product opening,
including slots, connectors, and ports, stop using the product immediately,
turn off the power, and disconnect all cables or remove the battery. Be
sure to remove any foreign object before you turn on the product.
DO NOT use, charge, or store the product:
- Where it may come into contact with liquids
- Where condensation forms
- Where there is a lot of dust
- Where the temperature or humidity are extreme
- Near ames, a heater, or in direct sunlight
DO NOT touch the connection ports with wet hands.
DO NOT disassemble or alter the product.
DO NOT pour chemicals and combustible sprays over the products.
Use and store the product, other components, and packing bags out of the
reach of children.
Remove the battery or disconnect the cord when shipping.
If the product is not in use for long periods, remove the battery or
disconnect the cord before storing.
When connecting the product to a computer using a USB cable and
both are powered by a vehicle, ensure you have a proper grounding
(-) connection to both the product and the computer. If either device is
improperly grounded, the current will travel through the USB cable causing
it to overheat and possibly catch re.
Rechargeable Li-ion Battery
Keep away from infants. If ingested, contact emergency services
immediately.
Stop using the battery if there are noticeable abnormalities such as smell,
heat, deformities, or discoloration.
If liquid from the battery gets into your eyes, wash them immediately with
clean water. Contact emergency services immediately.
AC Adapter, Car Adapter
Use only with the specied product.
Insert the plug rmly into the AC power outlet.
Use the AC Adapter with the standard AC power outlet (AC 100 V - 240 V
50/60 Hz) and the Car Adapter with DC 12 V supplies.
DO NOT allow metal objects to come into contact with connectors and ports.
DO NOT pull on the cord when disconnecting the AC Adapter cord or Car
Adapter from a power outlet. Hold the plug to disconnect an Adapter from
a power outlet.
DO NOT damage, twist, severly bend, pull on, place objects on, or bind
the AC Adapter and Car Adapter.
DO NOT allow the AC Adapter and Car Adapter cables to be pinched.
DO NOT overload AC power outlet.
CAUTION
Failure to observe instructions and warnings could result in minor or
moderate injuries. Follow these guidelines to avoid injury.
Product
DO NOT touch the blade or print head. Doing so could cause injury.
DO NOT hold the product by the Media Compartment Cover or the Roll
Guide. There is a risk that the cover or guide could detach or the product
could fall.
Be careful when opening the Media Compartment Cover and avoid the
hinges. There is a risk of pinching your ngers.
When connecting cables and accessories, follow the applicable instructions.
DO NOT touch the print head and the metal parts surrounding the print head.
If the product is used for a long period of time, the highlighted product
parts may get hot enough to cause a low-temperature burn.
Rechargeable Li-ion Battery
If liquid from the battery gets onto skin or clothes, immediately rinse it with
water.
AC Adapter, Car Adapter
Make sure you can always access the AC Adapter cord so that you can
disconnect it immediately in an emergency.
Belt Clip
Make sure that the belt clip is attached securely to the product and the
wearer's belt.
General Precautions
Product, AC Adapter, Car Adapter, or Accessories
Observe all applicable regulations when disposing of these products.
DO NOT remove the labels afxed to the product. These labels provide
operational information and indicate the product name and serial number.
For more information about your model's electrical rating, manufacturer,
and model number, see the label attached to the base of your machine or
the label inside the battery compartment.
Operate in a location where the temperature is between -4°F and 131°F
(-20°C and 55°C) and the humidity is between 10% and 90% (without
condensation).
The product shown in the illustrations may be different from your product.
Regulation
International ENERGY STAR
®
Qualication Statement
(for USA and Canada only)
The purpose of the International ENERGY STAR
®
Program is to promote the
development and popularization of energy-efcient ofce equipment. As an
ENERGY STAR
®
Partner, Brother Industries, Ltd. has determined that this
product meets the ENERGY STAR
®
specications for energy efciency.
ATTENTION (USA and Canada):
The product you have purchased is powered by
Lithium Ion battery which is recyclable. At the end of
its useful life, under various state and local laws, it is
illegal to dispose of this battery into your municipal
waste stream.
Please call 1-800-8-BATTERY for information on how
to recycle this battery.
CAUTION (USA)
RISK OF EXPLOSION IF BATTERY IS REPLACED
WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
Federal Communications Commission (FCC) (USA)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any
other antenna or tarnsmitter.
Important
Changes or modications not expressly approved by Brother Industries,
Ltd. could void the user’s authority to operate the equipment.
Federal Communications Commission (FCC) Supplier's
Declaration of Conformity (USA)
Responsible Party: Brother Mobile Solutions, Inc.
11030 Circle Point Road, Suite 100
Westminster, CO 80020, U.S.A.
Tel: (303) 460-1600
declares, that the products
Product Name: Brother Mobile Printer
Model Number: RJ-3250WB/RJ-3230B
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference
that may cause undesired operation.
Compliance with FCC requirement 15.407(c) (RJ-3250WB USA)
Data transmission is always initiated by software, which is the passed down
through the MAC, through the digital and analog baseband, and nally to
the radio frequency (RF) chip. Several special packets are initiated by the
MAC. These are the only ways the digital baseband portion will turn on the
RF transmitter, which it then turns off at the end of the packet. Therefore,
the transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or
operational failure.
Frequency Tolerance (RJ-3250WB USA): ±20 ppm
RF Exposure Notice (RJ-3230B USA)
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines. This equipment has very low levels of RF energy that
are deemed to comply without testing of specic absorption rate (SAR).
RF Exposure Notice (RJ-3250WB USA and RJ-3250WB/3230B Canada)
The available scientic evidence does not show that any health problems
are associated with using low power wireless devices. There is no proof,
however, that these low power wireless devices are absolutely safe. Low
power Wireless devices emit low levels of radio frequency energy (RF) in
the microwave range while being used. Whereas high levels of RF can
produce health effects (by heating tissue), exposure of low-level RF that
does not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects might
occur, but such ndings have not been conrmed by additional research.
RJ-3250WB/3230B have been tested and found to comply with FCC/IC
radiation exposure limits set forth for an uncontrolled environment and meet
the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC
radio frequency (RF) Exposure rules.
Industry Canada Compliance Statement
(Canada)
This device complies with Industry Canada's licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
(RJ-3250WB Canada) For indoor use only (5150-5350 MHz).
Open Source Licensing Remarks
This product includes open source software.
To see the Open Source Licensing Remarks, go to your model’s Manuals
page on the Brother support website at support.brother.com.
Disclaimer
Brother disclaims any warranties with respect to avoidance, mitigation
or non-occurrence of any breakdowns, malfunctions, system crashes,
hang-ups, virus infections, damage and disappearances of data, and any
other kind of errors by using this product. AS LONG AS PERMITTED BY
APPLICABLE LAWS, BROTHER WILL NOT BE LIABLE FOR ANY LOST
REVENUES OR INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,
EXEMPLARY, OR PUNITIVE DAMAGES OF THE CUSTOMERS OR ANY
OTHER THIRD PARTY.
DON'T FORGET TO REGISTER!
Registering your product will provide purchase conrmation, proof
of ownership and, if you choose, allow us to notify you of product
enhancements and special offers!
You can register online at: www.registermybrother.com.
LIMITED WARRANTY
Product warranty information can be found online at:
https://brothermobilesolutions.com/warranty/.
RJ-3250WB/3230B
Guía de seguridad del producto (español)
Asegúrese de leer este documento antes de usar el producto.
Le recomendamos que guarde este documento en un lugar accesible
para futuras consultas.
Para obtener información acerca de servicios, ajustes o reparaciones,
contacte con el Servicio de atención al cliente de Brother o con su
distribuidor de Brother local.
Si el producto funciona de forma anormal u ocurre una falla de
funcionamiento, apague el producto y desconecte cada uno de los cables.
Luego, póngase en contacto con el Servicio de atención al cliente de
Brother o su distribuidor de Brother local.
La información proporcionada en este documento está sujeta a cambios
sin previo aviso.
Se prohíbe la duplicación o reproducción no autorizadas de todo o parte
del contenido de este documento.
No nos hacemos responsables de los daños o de la pérdida de ganancias
que se deriven del uso de las etiquetas creadas con este producto;
tampoco asumimos ninguna responsabilidad por la desaparición o
modicación de los datos debido a fallos, reparaciones o consumibles,
y no aceptamos ninguna reclamación de terceros.
Los manuales en español para este modelo están disponibles en
support.brother.com.
PELIGRO
Si no se siguen las instrucciones y advertencias, las consecuencias
podrían ser la muerte o lesiones graves. Siga estas directrices para
evitar situaciones de riesgo como la generación de calor, humo, una
explosión o un incendio.
Batería recargable de iones de litio
NO permita que la batería entre en contacto con líquidos.
NO cargue, utilice ni deje la batería en lugares con una temperatura alta
(por encima de 140 °F/60 °C).
NO intente cargar la batería con un cargador no admitido.
Utilice la batería únicamente para los nes previstos.
Mantenga la batería alejada de cualquier fuente de calor e incendio.
NO conecte los terminales “+” y “-” con objetos metálicos, como cables.
NO transporte ni almacene la batería junto con objetos metálicos.
NO tire, golpee ni dañe la batería de forma alguna.
NO suelde ninguna conexión a la batería.
NO desmonte ni modique la batería.
NO deseche la batería junto con residuos domésticos.
ADVERTENCIA
Si no se siguen las instrucciones y advertencias, las consecuencias
podrían ser la muerte o lesiones graves. Siga estas directrices para
evitar el riesgo de generación de calor o humo, explosiones,
incendios o lesiones.
Producto, adaptador de CA (opcional) o adaptador para vehículo
(opcional)
Si se inserta accidentalmente un objeto extraño en cualquier apertura del
producto, incluidos ranuras, conectores y puertos, deje de usar el producto
de inmediato, apague la fuente de alimentación y desconecte todos los
cables o quite la batería. Asegúrese de quitar cualquier objeto extraño del
producto antes de encenderlo.
NO use, cargue o almacene el producto:
- En lugares donde pueda entrar en contacto con líquidos.
- En lugares donde se forme condensación.
- En lugares donde haya mucho polvo.
- En lugares donde la temperatura o la humedad sean extremas.
- Cerca de llamas o una estufa, o bien a la luz directa del sol.
NO toque los puertos de conexión con las manos húmedas.
NO desarme ni altere el producto.
NO vierta químicos ni rocíe combustibles sobre el producto.
Use y almacene el producto, otros componentes y las bolsas de
empaquetado fuera del alcance de los niños.
Retire la batería o desconecte el cable durante un envío.
Si el producto no se usa durante largos períodos, retire la batería o
desconecte el cable antes de almacenarlo.
Si conecta el producto a una computadora mediante un cable USB y
ambos dispositivos se alimentan con energía vehicular, asegúrese de
que dispone de una conexión de tierra (-) tanto para el producto como
para la computadora. Si alguno de los dos dispositivos no dispone de una
conexión de tierra adecuada, la corriente viajará por el cable USB, lo que
provocará un sobrecalentamiento y, posiblemente, un incendio.
Batería recargable de iones de litio
Mantenga lejos de los niños. Si se ingiere, póngase en contacto con los
servicios de emergencia de forma inmediata.
Deje de utilizar la batería si detecta alguna anomalía como un olor, calor,
deformidades o decoloración.
Si el líquido de la batería entra en contacto con los ojos, enjuáguelos de
inmediato con agua limpia. Póngase en contacto con los servicios de
emergencia de forma inmediata.
Adaptador de CA, adaptador para vehículo
Use el adaptador solo con el producto especicado.
Inserte el enchufe con rmeza en el tomacorriente de CA.
Use el adaptador de CA con un tomacorriente de CA estándar (100 a
240 V CA, 50/60 Hz) y el adaptador para vehículo con suministros de
12 V CC.
NO permita que los conectores y puertos entren en contacto con objetos
metálicos.
NO tire del cable al desconectar el cable del adaptador de CA o el
adaptador para vehículo de un tomacorriente. Aplique presión en el
enchufe al desconectar el adaptador de un tomacorriente.
NO dañe, tuerza ni doble con fuerza el adaptador de CA ni el adaptador
para vehículo; tampoco tire de estos ni coloque objetos sobre ellos.
NO permita que se pellizquen los cables del adaptador de CA y el
adaptador para vehículo.
NO sobrecargue el tomacorriente de CA.
AVISO
Si no se siguen las instrucciones y advertencias, las consecuencias
podrían ser lesiones leves o moderadas. Siga estas normas a n de
evitar lesiones.
Producto
NO toque la cuchilla ni el cabezal de impresión. Si lo hace, podría
provocarse heridas.
NO sostenga el producto por la cubierta del compartimento del soporte ni
por la guía del rollo. Existe el riesgo de que la cubierta o la guía se salga,
o que el producto se caiga.
Lleve cuidado al abrir la cubierta del compartimento del soporte y evite
tocar las bisagras. Existe el riesgo de que se pellizque los dedos.
Al conectar cables y accesorios, siga las instrucciones correspondientes.
NO toque el cabezal de impresión ni las piezas metálicas a su alrededor.
Si el producto se usa durante un largo período, las piezas resaltadas
podrían calentarse lo suciente como para causar quemaduras de baja
intensidad.
Batería recargable de iones de litio
Si el líquido de la batería entra en contacto con la piel o la ropa,
enjuáguelos de inmediato con agua.
Adaptador de CA, adaptador para vehículo
Asegúrese de que siempre pueda acceder al cable del adaptador de CA, de
modo que se pueda desconectar de inmediato en caso de una emergencia.
Broche para cinturón
Asegúrese de que el broche para cinturón se sujete de forma segura al
producto y al cinturón de la persona.
Precauciones generales
Producto, adaptador de CA, adaptador para vehículo o accesorios
Respete todas las regulaciones correspondientes al desechar estos productos.
NO quite las etiquetas adheridas al producto. Estas etiquetas brindan
información sobre el funcionamiento e indican el nombre del producto y el
número de serie.
Para obtener más información acerca de la clasicación eléctrica, el
fabricante y el número de modelo, consulte la etiqueta que gura en la
base del equipo o la que gura dentro del compartimento de la batería.
Utilice el producto en una ubicación donde la temperatura sea de entre
-20 °C y 55 °C (-4 °F y 131 °F) y la humedad esté entre el 10% y el 90%
(sin condensación).
El producto que aparece en las ilustraciones puede ser distinto del suyo.
Normativa
Declaración de conformidad internacional de
ENERGY STAR
®
(solo para Estados Unidos y Canadá)
El objetivo del programa internacional de ENERGY STAR
®
es promover
el desarrollo y la popularización de equipos de ocina con eciencia
energética. Como socio de ENERGY STAR
®
, Brother Industries, Ltd.
ha determinado que este producto cumple con las especicaciones de
eciencia energética de ENERGY STAR
®
.
ATENCIÓN (EE. UU. y Canadá)
El producto que ha adquirido funciona con una batería
reciclable de iones de litio. Al nal de su vida útil, según
varias leyes estatales y locales, es ilegal deshacerse de
la batería junto con los desechos municipales.
Llame al 1-800-8-BATTERY para obtener información
sobre cómo reciclar esta batería.
AVISO (EE. UU.)
RIESGO DE EXPLOSIÓN SI LA BATERÍA SE
SUSTITUYE POR UN TIPO INCORRECTO.
DESECHE LAS BATERÍAS UTILIZADAS SEGÚN
LAS INSTRUCCIONES.
Comisión Federal de Comunicaciones (FCC) (EE. UU)
Este equipo ha sido probado y se ha determinado que cumple con los
límites establecidos para dispositivos digitales Clase B, de conformidad
con la Parte 15 de las Normas de la FCC. Estos límites están diseñados
para ofrecer una protección razonable contra las interferencias perjudiciales
en una instalación doméstica. Este equipo genera, utiliza y puede irradiar
energía de radiofrecuencia y, si no se instala y se utiliza de acuerdo con las
instrucciones suministradas, podría ocasionar interferencias perjudiciales
para las comunicaciones por radio. No obstante, no se puede garantizar
que no se vayan a producir este tipo de interferencias en una instalación
en particular. Si este equipo ocasiona interferencias perjudiciales en la
recepción de radio o televisión, lo que puede comprobarse encendiendo
y apagando el equipo, se recomienda que el usuario intente corregir la
interferencia mediante una de las siguientes acciones:
Reoriente o reubique la antena de recepción.
Aumente la separación entre el equipo y el receptor.
No conecte el equipo a una toma del mismo circuito que el receptor.
Llame al distribuidor o a un técnico de radio y televisión con experiencia
para obtener ayuda.
Este transmisor no debe ubicarse junto a otra antena o transmisor ni
utilizarse conjuntamente con uno u otro.
Importante
Los cambios o las modicaciones no aprobados expresamente por
Brother Industries, Ltd. podrían anular la autorización que tiene el usuario
para utilizar este equipo.
Declaración de conformidad de la Comisión Federal de
Comunicaciones (FCC) (EE. UU.) del proveedor
Parte responsable: Brother Mobile Solutions, Inc.
11030 Circle Point Road, Suite 100
Westminster, CO 80020, U.S.A.
Tel.: (303) 460-1600
declara que el producto
Nombre del producto: Impresora portátil Brother
Número de modelo: RJ-3250WB/RJ-3230B
cumple la Parte 15 de las Normas de la FCC. Su utilización está sujeta a las
dos condiciones siguientes: (1) Este dispositivo no debe causar
interferencias dañinas y (2) este dispositivo debe aceptar cualquier
interferencia que reciba, incluidas las que puedan causar una operación no
deseada.
Cumplimiento del requisito 15.407(c) (RJ-3250WB de EE. UU.) de la FCC
El software siempre inicia la transmisión de datos. Después, esta se pasa
por el MAC, la banda base digital y análoga y, nalmente, hasta el chip
de radiofrecuencia (RF). El MAC inicia varios paquetes especiales. Es la
única forma de que la banda de base digital active el transmisor de RF, que
luego se desactiva al nal del paquete. Por tanto, el transmisor solo estará
activado durante la transmisión de uno de los paquetes mencionados. Dicho
de otro modo, el dispositivo interrumpirá automáticamente la transmisión
en caso de que falte información para transmitir o se produzca un error de
funcionamiento.
Tolerancia a frecuencias (RJ-3250WB de EE. UU.): ±20 ppm
Aviso de exposición a RF (RJ-3230B de EE. UU.)
Este equipo cumple con los límites de exposición a radiación de la FCC
establecidos para un entorno sin control y cumple con las directrices de
exposición a radiofrecuencia (RF) de la FCC. Los niveles de energía de
RF de este equipo son muy bajos y se considera que cumplen con las
directrices sin probar la tasa de absorción especíca (SAR).
Aviso de exposición a RF (RJ-3250WB de EE. UU. y RJ-3250WB/3230B
de Canadá)
Las pruebas cientícas realizadas no muestran ningún problema de
salud asociado al uso de dispositivos inalámbricos de baja frecuencia.
Sin embargo, tampoco existen pruebas de que dichos dispositivos sean
completamente seguros. Los dispositivos inalámbricos de baja frecuencia
emiten niveles bajos de energía de radiofrecuencia (RF) en el espectro
de microondas durante su funcionamiento. Aunque los niveles altos de
RF pueden perjudicar la salud al aumentar la temperatura de los tejidos,
la exposición a RF de baja intensidad no produce dicho efecto ni afecta a
la salud de ninguna forma perjudicial conocida. Ninguno de los múltiples
estudios sobre la exposición a la RF de baja intensidad ha detectado ningún
efecto biológico. Algunos estudios sugieren que pueden producirse algunos
efectos biológicos, pero esta información no se ha corroborado en otros
estudios. Los modelos RJ-3250WB/3230B se han sometido a pruebas y
cumplen con los límites de exposición a radiación de FCC/IC establecidos
para un entorno sin control. También cumplen las directrices de exposición
a radiofrecuencia (RF) FCC y RSS-102 de la normativa de exposición a
radiofrecuencia (RF) IC.
Comentarios sobre licencias de Open Source
Este producto incluye software de código abierto.
Para consultar los comentarios sobre licencias de Open Source, vaya a la
página Manuales correspondiente a su modelo en la Página web de soporte
de Brother, en support.brother.com.
Descargo de responsabilidad
Brother rechaza cualquier garantía relacionada con la elusión, atenuación
o inexistencia de fallas, averías, bloqueos del sistema, infecciones de virus,
daños y desapariciones de datos, así como cualquier tipo de error derivado
del uso de este producto. Hasta el punto permitido por la legislación
aplicable, Brother no será responsable de ninguna pérdida de benecios ni
daño indirecto, especial, fortuito, consecuente, ejemplar o punitorio ocurrido
a los clientes o a cualquier tercero.
NO OLVIDE REGISTRAR EL PRODUCTO
Registrar el producto le proporcionará información de compra, pruebas
de propiedad y, si lo desea, nos permitirá noticarle de mejoras en los
productos y ofertas especiales.
Puede realizar el registro en línea en www.registermybrother.com.
GARANTÍA LIMITADA
Puede encontrar la información sobre la Garantía del producto en línea en
esta página:
https://brothermobilesolutions.com/warranty/.
D01YNU001A

Summary of content (2 pages)