Product Safety Guide 1 MFC-J2330DW/J2730DW/J3530DW/J3930DW Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Please read this booklet before attempting to operate the product, or before attempting any maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical shock, burns or suffocation. Brother shall not be liable for damage caused where the product owner has failed to follow instructions set out in this guide.
Symbols and conventions used in the documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. Bold Bold typeface identifies specific keys on the product’s control panel or on the computer screen. Italics Italicized typeface emphasizes an important point or refers you to a related topic.
Table of Contents 1 Compilation and Publication Notice ......................................................... 4 Choose a safe location for your product .................................................... 4 General precautions.......................................................................... 6 Connecting the product safely ............................................................. 11 Servicing the product.......................................................................
Compilation and Publication Notice 1 This product’s manuals have been compiled and published to provide the latest product safety information at the time of publication. The information contained in the manuals may be subject to change. For the latest manuals, please visit us at support.brother.com.
DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses, moisture or dust. Doing so may create a risk of an electrical shock, electrical short or fire. It may also damage the product and/or render it inoperable. DO NOT place the product near chemicals or in a place where chemicals could be spilled on it. Should chemicals come into contact with the product, there may be a risk of fire or electrical shock.
General precautions WARNING Plastic bags are used in the packing of your product. Plastic bags are not toys. To avoid the danger of suffocation, keep these bags away from babies and children and dispose of them correctly. DO NOT use the product near any medical electrical equipment. The radio emissions from the product may affect medical electrical equipment and cause a malfunction, which may result in a medical accident. For users with pacemakers: This product generates a weak magnetic field.
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. When adjusting the tray size from A3, Legal, Ledger or Folio to the original size, take care not to trap your fingers in the gaps or slots at the bottom of the tray.
(MFC-J3530DW/J3930DW) Be careful not to put your fingers in the areas shown in the illustrations. It may cause injury to you. (MFC-J2730DW/J3530DW/J3930DW) To prevent possible injuries, at least two people should lift the product. One person should hold the front of the product, and one person should hold the back, as shown in the illustration below. Carry the product by sliding your hands into the handhold indentations located on each side of the product.
DO NOT carry the product by holding the areas shown in the illustrations. Doing this may cause the product to slip out of your hands and may result in injury. (MFC-J2330DW) Carry the product by sliding your hands into the handhold indentations located on each side of the product.
When carrying the product, remove the trays if they have been expanded to hold large paper such as Ledger, A3, Legal or Folio size paper. The weight of the paper could cause the trays to fall and cause injury to you. If ink comes into contact with your skin, or into your eyes or mouth, please follow these steps immediately: • If ink is on your skin, wash it away with water and soap immediately. • If ink gets into your eyes, rinse them with water immediately.
IMPORTANT • Disruption of power can wipe out information in the product’s memory. • DO NOT connect your product to an electrical socket on the same circuit as large appliances or other equipment that requires a significant amount of electricity to operate. Operating this product in conjunction with the other product(s) could create an overvoltage, tripping your circuit breaker or blowing your fuse. • We recommend that you only use our genuine ink cartridges.
DO NOT allow the plug, power outlet or the product to become dusty. DO NOT attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltages and other risks, and may void your warranty. If you experience any problems with your product, contact Brother customer service or your local Brother dealer. DO NOT allow any type of liquid to come into contact with the plug or power outlet.
This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call your electrician to replace your obsolete outlet. DO NOT use the supplied grounded plug in any other outlet except those specified. Doing so may cause an electrical shock. Use caution when installing or modifying telephone lines.
Servicing the product WARNING If the product has been dropped or the casing has been damaged, there may be the possibility of an electrical shock. Unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer. If the product becomes unusually hot, releases smoke, generates any strong smells, or if you accidentally spill any liquid on it, immediately unplug the product from the electrical socket. Contact Brother customer service or your local Brother dealer.
Important Safety Instructions 1 1 Read all of these instructions. 2 Save them for later reference. 3 Follow all warnings and instructions marked on the product. 4 Unplug this product from the wall outlet before cleaning the outside of the product and the scanner glass. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 5 Do not place this product near water. 6 Do not place this product on an unstable cart, stand, or table. The product may drop, causing serious damage to the product.
Unplug this product from the wall outlet and refer servicing to Authorized Service Personnel under the following conditions: If the power cord is damaged or frayed. If the product has been spilled by liquid. If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions.
Approval Information 1 THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. Notes on Using the Wireless Network Models 1 1 For Wireless LAN Function of the Equipment Operating frequency: 2.4 - 2.
LAN connection (Models with Wired LAN function only) 1 CAUTION DO NOT connect this product to a LAN connection that is subject to over-voltages. Trademarks 1 Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh and Mac are trademarks of Apple Inc., registered in the United States and other countries. Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Other Information 1 FlashFX® is a registered trademark of Datalight, Inc. FlashFX® Copyright 1998-2014 Datalight, Inc. U.S.Patent Office 5,860,082/6,260,156 FlashFX® Pro™ is a trademark of Datalight, Inc. FlashFX® Tera™ is a trademark of Datalight, Inc. Reliance™ is a trademark of Datalight, Inc. Reliance Nitro™ is a trademark of Datalight, Inc. Datalight® is a registered trademark of Datalight, Inc. Copyright 1989-2014 Datalight, Inc.
www.brotherearth.