User Manual

1
Secure Network Access
Your machine’s default password is on the label on
the back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect your
machine from unauthorised access.
NOTE
• Save all packing materials and the box in case for any reason you
must ship your machine.
• For a network connection you must purchase a network
interface cable. Please use the supplied USB cable for a USB
connection.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is 5 metres
long.
Ethernet (Network) cable
Use a straight-through Category5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
2
Load plain A4 paper
1
Unpack the machine and check the components
Pull the paper tray completely out of
the machine as shown by the arrow.
Take off the tray top cover.
Fan the paper well.
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine.
Lift the scanner cover. Close the scanner cover.
Follow the Touchscreen
instructions to unpack and install
the ink cartridges.
After installing all of ink cartridges,
the machine will prepare ink tube
system for printing.
When the machine has finished the initial cleaning
process, follow the Touchscreen instructions to
configure the machine’s settings.
• Check print quality
• Set Brother LCD Message defaults
• Print the installation sheet
Open the ink cartridge cover, and then
remove the orange protective part
from the machine.
Load the paper in the tray with
the printing surface down.
Connect the power cord. The machine will
power on automatically.
Adjust the paper guides.
Do not exceed this
mark (bbb).
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below.
NOTE
You can adjust the control panel angle to read
the Touchscreen more easily.
NOTE
Follow the Touchscreen instructions to store
the orange protective part inside the machine.
If you must transport the machine, remove
the ink cartridges and replace this part.
Pull out the paper support
until it locks into place.
Put on the tray top cover, and then
slowly push the paper tray completely
into the machine.
a. Extension telephone
b. External telephone
Quick Setup Guide
MFC-J2330DW
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
3
Connect the power cord
5
Install the inbox ink cartridges
6
Machine settings
Inbox Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Product Safety Guide
Brother Installation Disc Telephone Line Cord
Maintenance Sheet Power Cord USB Interface Cable
1. Press [Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2. Press your language.
3. Press .
7
Select your language
(if needed)
8
Connect the telephone line cord
If you are not using your machine as a fax, go to
9
.
The latest manuals are available at the Brother Solutions Center:
www.95105369.com
4
Set the date and time
Follow the Touchscreen instructions to set the date
and time.
Quickly shake just the black
ink cartridge horizontally
15 times as shown, before
inserting it into the machine.
CHN-ENG
Version D
1
2