Product Safety Guide

ManualsBrandsBrother ManualsColor Printer (Laser / LED)HL-EX470W

Table Of Contents

Product Safety Guide

Read this guide before attempting to operate the product, or before attempting any maintenance,

and ensure that you follow all warnings and instructions marked on the product. If you have

concerns about how to use your product safely after reading this guide, contact Brother customer

service or your local Brother dealer. Failure to follow these instructions may result in an increased

risk of personal injury or damage to property, including through fire, electrical shock, burns or

suffocation. Brother shall not be liable for the damage caused where the product owner has failed

to follow the instructions set out in this guide or on the product.

For more advanced instructions, information, and product specifications, see the Online User's

Guide at

support.brother.com/manuals.

Symbols and Conventions

Used in the Documentation

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

NOTE

NOTE specifies the operating environment,

conditions for installation, or special

conditions of use.

Electrical Hazard icons alert you to

possible electrical shock.

Fire Hazard icons alert you to the

possibility of a fire.

Hot Surface icons warn you not to

touch product parts that are hot.

Prohibition icons indicate actions

that must not be performed.

Product Safety Guide

HL-L9410CDN / HL-L9430CDN / HL-L9470CDN / HL-EX470W / MFC-L9610CDN / MFC-L9630CDN / MFC-L9670CDN /

MFC-EX670W

Summary of content (23 pages)

PAGE 1
Product Safety Guide HL-L9410CDN / HL-L9430CDN / HL-L9470CDN / HL-EX470W / MFC-L9610CDN / MFC-L9630CDN / MFC-L9670CDN / MFC-EX670W Read this guide before attempting to operate the product, or before attempting any maintenance, and ensure that you follow all warnings and instructions marked on the product. If you have concerns about how to use your product safely after reading this guide, contact Brother customer service or your local Brother dealer.
PAGE 2
Compilation and Publication Notice The definitions of font style are as follows: Bold Bold typeface identifies specific keys on the product's control panel or on the computer screen. Italics Italicized style emphasizes an important point or refers you to a related topic. Courier New Text in Courier New font identifies messages on the LCD of the product. Not all models are available in all countries. The illustrations in this guide show the HL-L9430CDN/MFC-L9630CDN.
PAGE 3
DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water. Doing so may create the risk of an electrical shock, short circuit, or fire, as water may come into contact with the product (including condensation caused by heating/air conditioning/ventilation equipment). DO NOT allow this product to come into contact with water.
PAGE 4
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the machine's ventilation could create a risk of overheating and/or fire. Instead: • Keep a minimum gap around the product as shown in the illustration. Products without the scanning function Products with the scanning function • Place the product on a solid level surface. • DO NOT place this product near or over a radiator or heater.
PAGE 5
DO NOT place this product on an unstable cart, stand, or table, particularly if children are expected to be near the product. The product is heavy and may fall, causing injury to you or others and serious damage to the product. For the products with scanning functionality, there is an added risk of injury if the scanner glass should break. Avoid placing your product in a busy area.
PAGE 6
There are high-voltage electrodes inside the product. Before you access the inside of the product, including for routine maintenance such as cleaning, make sure you have unplugged the telephone line cord first (models with the fax function only) and then the power cord from the AC power outlet, as well as any telephone/RJ-11 (models with the fax function only) or Ethernet/RJ-45 cables (network models only) from the product.
PAGE 7
If water, other liquids, or metal objects get inside the product, immediately unplug the product from the AC power outlet and contact Brother Authorized Service Personnel. This product should be connected to an AC power source within the range indicated on the rating label on your machine. DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a qualified electrician.
PAGE 8
FIRE HAZARDS Failure to follow the warnings in this section may create the risk of a fire. DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire. Instead, use only a dry, lint-free cloth. For instructions on how to clean the product, see the Online User's Guide. DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside the product.
PAGE 9
DO NOT place metal objects, such as clips, staples, or jewelry on the product. If these objects contact the electrical parts inside the product, it may cause a fire or electrical shock. DO NOT place a container holding water or liquid on the product. The water or liquid in the container may spill into the product making contact with the electrical parts inside the product, which may cause a fire or electrical shock.
PAGE 10
(Models with the fax function only) Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged from the wall jack. Never install telephone wiring during a thunderstorm. Never install a telephone wall jack in a location that is wet or may become wet, for example, near a refrigerator or other appliance that produces condensation. Power Cord Safety: • This product is equipped with a grounded plug.
PAGE 11
To prevent possible injuries, at least two people should lift the product by holding it from the front and back. DO NOT carry the product by holding the areas shown in the illustrations. Doing this may cause the product to slip out of your hands and may result in injury. If you use a Lower Tray/optional output tray, DO NOT carry the product with the Lower Tray/ optional output tray as you may be injured or cause damage to the product because it is not attached to the Lower Tray/optional output tray.
PAGE 12
For your safety, unplug the product from the power outlet when it is not used for a long time. When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product. Some products and/or their cartons contain a silica gel pack. DO NOT eat the silica gel pack; throw it away. If you ingest it, seek medical attention immediately. DO NOT try to open a toner cartridge.
PAGE 13
DO NOT remove or damage any of the caution or warning labels inside the product. IMPORTANT • A distinct change in the product’s performance may indicate a need for service. • DO NOT connect your product to an AC power outlet controlled by wall switches or automatic timers, or to the same circuit as a large appliance or other equipment that requires a significant amount of electricity. It could disrupt the power supply.
PAGE 14
Important Safety Instructions DO NOT attempt to service this product yourself because opening or removing covers may expose you to dangerous voltage points and other risks and may void your warranty. Refer all servicing to a Brother Authorized Service Center. 1. Read all of these instructions. 2. Save these instructions for later reference. 3. Follow all warnings and instructions marked on the product. 4.
PAGE 15
2. Avoid using this product during a thunderstorm. There may be a remote risk of an electrical shock from lightning. 3. DO NOT use this product to report a gas leak in the vicinity of the leak. 4. Use only the power cord provided with the product (if included in the box). Read all of the instructions. Save them for later reference. (Models with the fax function only) To reduce the risk of fire, electrical shock, and injury to people; • Use only a No. 26 AWG or larger telecommunication line cord.
PAGE 16
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back side of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. You may safely connect this equipment to the telephone line by means of a standard modular jack, USOC RJ11C.
PAGE 17
Federal Communications Commission (FCC) Supplier's Declaration of Conformity (USA Only) Responsible Party: Brother International Corporation 200 Crossing Boulevard Bridgewater, NJ 08807-0911 USA TEL: (908) 704-1700 declares, that the products Product Name: Color Laser Printer Model Numbers: HL-L9410CDN/HL-L9430CDN/HL-L9470CDN/HL-EX470W Product Name: Multi Function Printer Model Numbers: MFC-L9610CDN/MFC-L9630CDN/MFC-L9670CDN/MFC-EX670W comply with Part 15 of the FCC Rules.
PAGE 18
The Wireless Module is installed in the following location. RF Exposure Notice (USA or Canada Only) (Wireless Models Only) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from a person's body.
PAGE 19
(1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
PAGE 20
This product complies with FDA performance standards for laser products except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. WARNING Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in hazardous invisible radiation exposure. Internal laser radiation: Max.
PAGE 21
Trademarks Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
PAGE 22
Copying or Scanning copyrighted works may be regulated by Federal, State, or local law. For more information, consult an appropriate authority or advisor. To request a printed version of the Online User's Guide, please contact us at: Chile and Bolivia: Tel: 800-541-000 / Email: info@brother.cl Peru: Tel: 0800-00-066 / Email: info@brother.com.pe Mexico: Tel: 01-800-759-6000 / 01-800-759-8000 URL: www.brother.com.mx Argentina, Paraguay and Uruguay: In Argentina: www.brother.com.ar In Paraguay: www.brother.
PAGE 23
These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries.