R-R-bnc-POUT-01801 POUT - EYES 6
트레이 충전 범위 모델명 사이즈 재질 무게 정격 입력 정격 출력 주파수 사용 온도 LED 상태등 POUT-01801 MDF, ABS, TPE, STEEL 5V / 2A or 9V /1.67A 5W / 7.5W / 10W LED 상태등 EYES 6는 Qi 호환 장치에 무선으로 효율적으로 충전하는 최신 무선 충전 기술을 제공하는 편안한 책상 액세서리입니다. EYES 6 - 무선 충전기는 최신 무선 기술을 사용하여 전자기 유도를 통해 모든 Qi 호환 장치를 신속하게 충전합니다. 충전 패드에 휴대폰을두기 만하면 전선이나 추가 액세서리가 필요없이 충전이 자동으로 시작됩니다. 보호 기능 : OVP (과전압), OCP (과전류), OTP (과열), FOD (외부 객체 감지), DPL (동적 전력 제한) 마이크로 USB 케이블 및 어댑터는 패키지에 포함되어 있지 않습니다. 기기가 충전 영역에 올바르게 놓여 있으면 1-2초 후에 무선 충전이 시작되는 것을 알 수 있습니다.
적절한 충전 케이블을 무선 충전기에 올바르게 연결하십시오. 무선 충전기의 충전 범위에 장치를 놓으면 무선 충전이 몇 초 만에 시작됩니다. 무선 충전은 자기 유도 기술을 사용합니다. 장치가 충전 패드에 올바르게 놓였는지 확인하십시오. 그렇게 하지 않으면 무선 충전이 작동하지 않을 수 있습니다. 정격보다 낮은 전류 용량의 USB 포트 전원 (PC의 USB 포트 포함)을 사용하면 오작동이 발생할 수 있습니다. 무선 충전 오류가 발생하면 무선 충전 패드에서 모바일 장치를 들어 올려 충전 패드에 다시 놓습니다. 장치에서 이상한 냄새나 소리가 나거나 장치에서 연기 또는 액체가 누출되는 것을 발견하면 즉시 장치 사용을 중단하고 서비스 센터에 문의하십시오. 그렇게 하지 않으면 화재나 폭발을 초래할 수 있습니다. 다른 전자 장치 근처에서 장치를 사용하지 마십시오. 대부분의 전자 장치는 무선 주파수 신호를 사용합니다. 장치가 다른 전자 장치를 방해 할 수 있습니다. 스피커가 있는 장치는 특히 방해를 받기 쉽습니다.
POUT-01801 MDF, ABS, TPE, STEEL 5V / 2A or 9V /1.67A 5W / 7.5W / 10W Go Wireless Woody Starter is a comfortable desk accessory that provides the latest wireless charging technology charging Qi compatible devices wirelessly and efficiently. WOODY - Wireless Charger utilizes the latest wireless technology to quickly charge any Qi-compatible device through electromagnetic induction.
Connect the appropriate charging adapter to the wireless charger properly. Simply place your device on the charging area of this wireless charger. Wireless charging will begin in seconds. Wireless charging uses magnetic induction technology. Make sure that your device is properly positioned on the charging pad. Failure in doing so may cause wireless charging not working. Using USB port power (including USB port of PC) with lower current capacity than rating may cause malfunction in use.
POUT-EYES 6 POUT-01801
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.