Product Description

AAAAAA
ONOFF
KEYBOARD & MOUSE
WIRELESS MULTIMEDIA
Lifeworks Technology Group LLC
New York, NY 10018
Customer Service: 877-5430-3540
www.brookstone.com
The BROOKSTONE® trademarks, names and logos are owned by BKST Brand
Holdings LLC. 2019 ©. All rights reserved, manufactured, marketed, and
distributed by Lifeworks Technology Group LLC., used under license.
Made in China
BRK2100
Product Specs Product Description
Installation Steps:
1. Slide off battery cover
2. Insert AA battery into the battery compartment (back of keyboard) and put cover back on
3. Switch keyboard on
4. Connect nano USB receiver to an available USB port on your
computer. The keyboard and mouse automatically connect to
the USB receiver. Power indicator will flash red, then it is connected successfully.
5. Start using your trackpad keyboard!
NOTE: if keyboard fails to connect, press ESC+K, forcing it to enter pairing mode.
Operation
Tips
• Auto-sleep and power saving function: The keyboard will enter sleep mode when idle for
10 minutes. To activate it, press any key and wait for 3 seconds.
• Please turn off the power if you’re traveling or not using the keyboard for a long time.
Safety Instructions
• Keep the keyboard away from sharp objects that could damage it.
• Do not put heavy objects on the keyboard.
• Do not stretch, twist or apply force to the keyboard.
• To clean the keyboard, gently wipe it using a moist cotton cloth.
• Make sure the keyboard is turned off before cleaning. Do not use liquid cleanser.
Troubleshooting
• Ensure the USB nano receiver is connected to your computer. If it is, try connecting it to a different
USB port.
• Ensure that the batteries are charged and inserted correctly.
• Ensure that the sensor on the bottom of the mouse is clean.
• Restart your computer.
• If keyboard fails to connect, press ESC+K, forcing it to enter pairing mode.
Tips and Troubleshooting
AAA
AAA
4
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult a service representative for help.
Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits.
LifeWorks is not responsible for any radio or television interference caused by using other than recommended cables
and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the user’s authority to operate the equipment.
Responsible party:
LifeWorks Technology Group LLC
530 7th Ave., New York, NY 10018
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC StatementHealth and Safety Warnings
Battery-Powered Devices
Use of rechargeable or disposable batteries in an improper manner may result in battery fluid leakage, overheating or
explosion. Battery fluid is corrosive, may be toxic, can cause skin and eye burns, and is harmful if swallowed. Radio
Frequency Technical Specifications: 2.4 GHz Devices Non-specific short range device. RF output power meets all
SRD requirements.
Warning Improper setup, use and care of this product can increase the risk of serious injury death or device
damage. Read and keep this guide and all other printed guides for future reference. For updated guides or
replacements go to golifeworks.com
Do Not Attempt Repairs. Do not attempt to take apart, open, repair, service or modify the device(s). Doing so
may risk electric shock or other hazard. Evidence of any attempt to open or modify the device, including any peeling,
puncture or removal of labels, will void the Limited Lifetime Warranty.
SYSTEM REQUIREMENTS:
Works with Windows XP/7/8/10 & MAC OS
SPECIFICATIONS: KEYBOARD
FEATURES: Works up to 10m range
USB-A Nano receiver
SIGNAL: 2.4GHz wireless frequency
POWER: 2x AAA batteries (included)
Auto wake/sleep
COMPATIBILITY: Plug and play
CONNECTION: USB-A Nano receiver
Wireless
Trackpad
Keyboard
Battery
Cover
Nano
Receiver
Storage
ON/OFF
Printed in China
Windows, 2000, XP, Vista, Windows 7, and Windows 8 are registered
trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. Mac * is a trademark of Apple Inc.,
registered in the U.S. and other countries. All other brands and logos
are trademarks of their respective companies.
1 2 3
4 5
AAA
AAA
(2) AAA
batteries
Nano USB
Reciever
AAAAAA
ONOFF
AAA Battery
Compartment
4
3
1
2
2
FRONT BACK