® Baby Monitor & Sleep Sounds WARNING Strangulation Hazard-Children have STRANGLED in cords. Keep cord out of the reach of children– more than 3 ft (0.9m) away. Never place camera or cords within the crib. 849264_INS01113_TM_Wi-Fi_Baby_Size:5”Wx4.
Using the Night Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Playing Sleep Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Location of Parts and Controls . . . . . . . . . . . .
All of the safety and operating instructions should be read, adhered to and followed before the unit is operated. WARNING Strangulation Hazard-Children have STRANGLED in cords. Keep cord out of the reach of children–more than 3 ft (0.9m) away. Never place camera or cords within the crib. • The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves or other units that produce heat. • This product is not a toy.
LONG-TERM EXPOSURE TO LOUD SOUNDS MAY CAUSE HEARING DAMAGE. IT IS BEST TO AVOID EXTREME VOLUME WHEN USING THIS PRODUCT, ESPECIALLY FOR EXTENDED PERIODS. RECOMMENDATIONS FOR USE: • If being used in a room with an infant, place the device as far away from infant as possible and never in the crib or on a crib rail. • Always start with the lowest volume setting and adjust as needed. • Limit the duration of continuous noise by using timed shut-off or turn off device after infant falls asleep.
FCC ID : ZRB849264-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
LOCATION OF PARTS AND CONTROLS (MONITOR) 1. Night Vision Lens 17. Mount Connector 2. Camera 18. SSID Address 3. Sleep Sounds (16) 19. Wi-Fi Connection Switch 4. Microphone 5. Night Light 6. Volume - Button 7. Volume + Button 8. Night Light Button 9. Wi-Fi Connect Button 20. Reset Button 1 21. Wi-Fi Connect LED Indicator 2 22. Speaker 23. DC In port 24. Wall Mount 3 10. Sleep Sound Button 26. AC Adapter 8 24 15 4 14 13 14. 90 Min. Sleep Timer LED Indicator 16. 30 Min.
MONITOR TO WI-FI NETWORK SET-UP SCREEN ANDROID DEVICES 1. 2. 3. 4. 5. 1. 2. 3. Return Wi-Fi Networks List (path to return to Video) Enter Wi-Fi Network Name Field Enter Wi-Fi Network Password Field Select Encryption/Security Send Monitor information to Wi-Fi Network Button Return to Video Select Wi-Fi Network Name Enter Wi-Fi Network Password Field 4.
CAMERA APP CONTROL 1. 2. 3. 4. 1. 2. 3. 4. Continuous Listening On/Off Network Set Up/Monitors List Settings Menu Open/Close Terms of Use/Quick Start Guide 1 3 1 2 4 Note: The control layout may not appear exactly as shown, depending upon your device. 12 Night Vision On/Off Take Photo Camera Controller Zoom In 5. 6. 2 3 Zoom Out Camera Menu Open/Close 4 5 6 Note: The control layout may not appear exactly as shown, depending upon your device. 13 849264_INS01113_TM_Wi-Fi_Baby_Size:5”Wx4.
1. 2. 3. 4. Sleep Sound Volume Indicator Monitor Volume Indicator Sleep Enhance On/Off 90 Min. Sleep Timer 5. 6. 7. 8. SLEEP SOUNDS APP CONTROL (PHONE) (TABLET) Sleep Sound Menu Open/Close 60 Min. Sleep Timer 30 Min. Sleep Timer Sleep Sounds (16) 1 1. 2. 3. 4. 5. 2 Sleep Sounds (16) Sleep Sound Scroll Forward Monitor Volume Indicator 60 Min. Sleep Timer Sleep Enhance On/Off 6. 7. 8. 9. 10. 1 10 2 9 3 4 8 5 7 8 7 6 5 4 Sleep Sound Menu Open/Close 90 Min. Sleep Timer 30 Min.
MONITOR VOLUME APP CONTROL 1. 2. 3. 1. 2. White Night Light On/Off Multi-Color Night Light On/Off Night Light Menu Open/Close 1 2 3 Note: The control layout may not appear exactly as shown, depending upon your device. 16 Monitor Volume Indicator Monitor Volume Menu Open/Close 1 2 Note: The control layout may not appear exactly as shown, depending upon your device. 17 849264_INS01113_TM_Wi-Fi_Baby_Size:5”Wx4.
iPod touch® (3rd, 4th, 5th generation) iPhone 5s iPhone 5c iPhone 5 iPhone® 4s iPhone 4 iPhone 3GS MONITOR SET-UP iPad Air iPad mini (2nd generation) iPad® (4th generation) iPad mini iPad® (3rd generation) iPad 2 iPad Apple® iOS: 4.3 and later Place the Monitor at least 3 feet away from your baby’s crib or bed. Never place the Monitor or cords within a crib or bed. Android 2.2 and later, CPU: 800MHz RAM: 512M SD card: 256 MB or higher Insert the AC ADAPTER into the Monitor's DC IN PORT.
A separate Wi-Fi network is not needed when direct-connecting the Monitor and your device. 1. Download the TM Baby app from the App Store or Google Play. 2. Switch the Wi-Fi CONNECTION SWITCH on the bottom of the Monitor to “DIRECT CONNECT”. 3. Insert the AC ADAPTER into the Monitor's DC IN PORT. Plug the AC ADAPTER into a wall outlet. The MULTI-COLOR NIGHT LIGHT will show for several seconds while the Monitor is powering on. 4.
CONNECTING MONITOR TO A Wi-Fi NETWORK Connecting the Monitor to your Wi-Fi Network enables the TM Baby app to be active while other apps or the internet are accessed. 1. Download the TM Baby app from the App Store or Google Play. 2. Switch the Wi-Fi CONNECTION SWITCH on the bottom of the Monitor to “DIRECT CONNECT”. 3. Insert the AC ADAPTER into the Monitor's DC IN PORT. Plug the AC ADAPTER into a wall outlet. The MULTI-COLOR NIGHT LIGHT will show for several seconds while the Monitor is powering on.
10. Switch the Wi-Fi CONNECTION SWITCH on the bottom of the Monitor to “HOME NETWORK”. The MULTI-COLOR NIGHT LIGHT will show for several seconds while the Monitor is restarting. 11. The Wi-Fi CONNECT LED INDICATOR will blink rapidly while the Monitor is searching for a connection. After approximately 60 seconds, the Wi-Fi CONNECT LED INDICATOR will start to blink slowly indicating that the monitor is ready to connect. 12. On your device, go to Wi-Fi Settings.
8. Tap SEND MONITOR INFORMATION TO Wi-Fi NETWORK to link the first Monitor with Wi-Fi Network. ANDROID DEVICES: 1. Select “Add Wi-Fi network” in your device’s Wi-Fi menu. 2. Enter the entire SSID address as it appears on your Monitor for “Network SSID.” 3. Select “None” for “Security.” 4. Select “Save” to add your Monitor as a Wi-Fi network. 5. Select the Monitor’s SSID address in the Wi-Fi menu to connect. 9.
17. On your device, go to Settings and turn Wi-Fi on. 18. Locate the SSID address of the next Tranquil Moments Wi-Fi Baby Monitor which is printed on the underside of the unit. The SSID address starts with “TMBaby” and is followed by 12 unique digits. APPLE DEVICES: 1. Select “Other” in your device’s Wi-Fi menu. 2. Enter the entire SSID address as it appears on your Monitor for “Name.” 3. Select “None” for “Security.” 4. Select “Join” to add your Monitor as a Wi-Fi network. 5.
27. Confirm the next Monitor is connected by selecting the Monitor's SSID on the Monitor list, video will live stream. 28. To switch between connected Monitors, press the Settings icon in the app to open Setting options. Tap MONITORS. Select the desired Monitor's SSID on the Monitor list, video will live stream. 29. To connect additional monitors follow steps 14-28. TURNING Wi-Fi CONNECTION ON AND OFF As a default, the Monitor’s Wi-Fi Connection is on when the Monitor is plugged in. 1.
USING THE NIGHT LIGHT 1. Touch the dot under any SLEEP SOUND or press the SLEEP SOUND button to turn SLEEP SOUND on. 1. Press the NIGHT LIGHT button to turn on the White Night Light. 2. Press and hold the SLEEP SOUND button for 2 seconds to change the SLEEP SOUND's backlight and Monitor LED indicators setting to off. 3.
USING THE SLEEP TIMER 1. Touch the dot under the SLEEP SOUND or press the SLEEP SOUND button to turn on the SLEEP SOUND. The selected SLEEP SOUND name is backlit. 1. 2. Press the VOLUME + button to increase the SLEEP SOUND volume. 3. Press the VOLUME - button to decrease the SLEEP SOUND volume. 4. Touch the dot under the SLEEP SOUND or press the SLEEP SOUND button to turn off the SLEEP SOUND. Press the SLEEP TIMER button to select 30 minutes of selected SLEEP SOUND play.
• When the SLEEP TIMER is being used, the SLEEP SOUND will gradually fade away and shut off during the last 10 minutes of play time. • The SLEEP TIMER will be activated the next time the unit is turned on if the SLEEP TIMER was activated before the unit turned off. USING SLEEP ENHANCEMENT® Sleep Center research has proven that a gradual slowing of sounds helps promote better sleep and relaxation. When activated, the playback speed of the selected SLEEP SOUND gradually slows down over a 30-minute period.
CONTINUOUS LISTENING 1. Tap the up, down, left, and right arrows on the CAMERA CONTROLLER to control the camera position. CONTINUOUS LISTENING allows audio transmitting from the Monitor to your device to be heard when the Brookstone Baby app is closed. 2. Tap NIGHT VISION ON turn NIGHT VISION on. 1. Tap CONTINUOUS LISTENING ON turn CONTINUOUS LISTENING on. 3. Tap NIGHT VISION OFF turn NIGHT VISION off. 2. Tap CONTINUOUS LISTENING OFF turn CONTINUOUS LISTENING off. 4.
USING THE WALL MOUNT Important: Important: • If connecting the Monitor to a device, complete the connection steps on pages 20-21 before attaching the ANGLED MOUNT to the monitor. • If connecting the Monitor to a device, complete the connection steps on pages 20-21 before attaching the WALL MOUNT to the monitor. • If connecting the Monitor to a Wi-Fi Network, complete the connection steps on pages 22-24 before attaching the ANGLED MOUNT to the monitor.
2. (CONTINUED) Use a flat head screwdriver to fasten the INNER WALL MOUNT into the MOUNT CONNECTOR on the Monitor. Tighten the screw. USING THE WALL MOUNT 4. (CONTINUED) Line up the 4 tabs on the INNER WALL MOUNT connected to the Monitor with the 4 slots on the OUTER WALL MOUNT attached to the wall. Twist clockwise to secure. 3. Attach the OUTER WALL MOUNT to the wall (screws and wall anchors not included). 42 43 849264_INS01113_TM_Wi-Fi_Baby_Size:5”Wx4.
WOMB: Developed by Dr. Fred Schwartz, this exceptionally realistic program reproduces the familiar rhythms of blood flow into the uterus, a mother’s breathing and even a mother’s voice in the background. Designed to provide a sense of safety, security and familiarity to your new baby. PRENATAL: Developed by Dr. Jeffrey Thompson, this acoustically correct soundscape recreates sounds heard in the womb. Your new baby will feel right at home.
FREQUENTLY ASKED QUESTIONS It is taking a long time for the Wi-Fi CONNECTION LED to blink to begin the connection process. To reset the Monitor, unplug from the electrical outlet use the end of a paperclip to press and hold the RESET button for 5 seconds. It can take up to 60 seconds for the Wi-Fi CONNECTION LED to blink. Why doesn’t the Monitor’s SSID address show automatically on my device’s Wi-Fi menu as a Wi-Fi network? To ensure privacy, the Monitor does not broadcast its SSID address.
iPhone 4 iPhone 3GS I am having difficulty connecting the Monitor to my device. iPad Air iPad mini (2nd generation) Check the following: iPad® (4th generation) • A pp has been downloaded from the iTunes® App StoreSM or Google Play to your device. • Monitor is powered on. • Wi-Fi Connect is activated on the Monitor (see page 31). • Wi-Fi Connection LED is blinking slowly (searching for Wi-Fi connection). • Your device’s Wi-Fi is turned on.
iPad Apple iOS: 4.3 and later • Confirm your Wi-Fi Network name and/or password was entered correctly during the Connecting Monitor to a Wi-Fi Network process (see pages 22-24). Network name and password are case sensitive. Android 2.2 and later, CPU: 800MHz, RAM: 512M, SD card: 256 MB or higher • Confirm the TM Baby app was quit during the Wi-Fi Network set up process and not just closed or exited (refer to your device’s user manual for details if necessary).
iPad Air iPad mini (2nd generation) iPad® (4th generation) iPad mini iPad® (3rd generation) iPad 2 iPad Apple iOS: 4.3 and later Android 2.2 and later, CPU: 800MHz, RAM: 512M, SD card: 256 MB or higher Why is there an out of range warning on my device? When the Monitor is direct connected to a device and the device is moved out of range from the Monitor, a warning will appear on the device.
Why is there a pop up on my Android device that says “TM Baby is listening?” When Continuous Listening is activated and the app is closed, a pop up will appear to indicate that audio from the Monitor is still being transmitted through the app. SPECIFICATIONS Weight (Monitor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximately 1.4 lbs. Dimensions (Monitor) . . . . . . . . . . . . . . . . . . . . . . . . . Approximately 5.8" dia x 7" h Adapter . . . . . . . . . . . . . . . . . . . .
Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
Find thousands more great ideas online 849264 Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone.