TM SIMP HOME ® LIFE BY DESIG N TM WARM SHAKER / NORFOLK / LEXINGTON 72 INCH TV WIDE MEDIA STAND MODEL # AXWSH003-72BL 1/26
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION A MODEL # AXWSH003-72BL BL BR nAtav/ontrF AFor/vnat AFor/vnat TOP QTY 1 CL LEFT SIDE QTY 1 RIGHT SIDE QTY 1 DL CR Avan/toFrnt Avan/toFrnt Avan/toFrnt LEFT DIVIDER QTY 1 DR E Avan/toFrnt RIGHT MIDDLE DIVIDER QTY 1 LEFT MIDDLE DIVIDER QTY 1 RIGHT DIVIDER QTY 1 F tnavA/ tnorF Avan/toFrnt TOP DIVIDER QTY 1 BOTTOM SHELF QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION G MODEL # AXWSH003-72BL H I Avan/toFrnt TOP SHELF QTY 1 J CENTRE SHELF QTY 1 K LARGE DOOR (L&R Same) QTY 2 LR SHELF QTY 2 LL LEFT BACK PANEL QTY 1 SMALL DOOR (L&R Same) QTY 2 L1 L2 Warning Label RIGHT BACK PANEL QTY 1 TOP BACK PANEL QTY 1 BOTTOM BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION M N BOTTOM SUPPORT LEG QTY 2 PL O FLIP DOWN DOOR QTY 1 PR LEFT DRAWER SIDE QTY 1 MODEL # AXWSH003-72BL DRAWER FRONT QTY 1 Q RIGHT DRAWER SIDE QTY 1 DRAWER BACK QTY 1 R DRAWER BOTTOM QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 5 10 MAGNET AND PLATE QTY 4 SETS 17 8 11 PHILLIPS SCREW M4 X 15mm QTY 48 14 PHILLIPS SCREW M3 X 12mm QTY 4 a.M4X25mm-QTY2 (1siextra) b.M4X15mm-QTY1 c.
COMPONENTS-KEY DIAGRAM MODEL # AXWSH003-72BL L2 tnavA / tnorF A LL L1 LR J tnavA / tnorF tnavA / tnorF tnavA / tnorF BL CR E BR G DL CL tnavA / tnorF I DR tnavA / tnorF H N tnavA / tnorF K J I tnavA / tnorF tnavA / tnorF F K M M PR Q PL R O 9/26
ASSEMBLY MODEL # AXWSH003-72BL STEP-1 PR O PL 2 1. Attach 4 Cam Lock Pins 2 to pre-drilled holes at back of Drawer Front O . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides PL , PR . 3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side PL , PR . 4. Use flathead screwdriver to secure Cam Locks. STEP-2 R PL PR O 1. Slide Drawer Bottom R firmly into slots on Drawer Sides PL , PR and Drawer Front O .
ASSEMBLY MODEL # AXWSH003-72BL STEP-3 PR Q R 1 O PL 4 1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot. 2. Attach Drawer Back Q using 2 Allen Key Screws 1 through guide holes on each Side PL , PR . 3. Use Allen Key 4 to tighten screws. Do not over-tighten. STEP-4 PR Q NOTE: The screwdriver is not included in the hardware pack. R O PL 7 1. Use Phillips screwdriver to attach Handle 7 to Drawer Front O .
ASSEMBLY MODEL # AXWSH003-72BL AFov/rant STEP-5 AFov/rant DR AFov/rant H DL 3 1. Insert 6 Dowels 3 into guide holes on Centre Shelf H . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Centre Shelf H to Middle Dividers DL , DR . 4. Use rubber mallet to tap Middle Dividers DL , DR into Centre Shelf H .
ASSEMBLY MODEL # AXWSH003-72BL STEP-6 2 1 3 tnavA / tnorF 4 tnavA / tnorF tnavA / tnorF E G DR DL tnavA / tnorF H 1. Insert 2 Dowels 3 into guide holes on bottom of Top Divider E . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Top Shelf G to Top Divider E using 3 Allen Key Screws 1 . 4. Use Allen Key 4 to tighten Screws. Do not over-tighten. 3. Attach 6 Cam Lock Pins 2 to Top Shelf G using pre-drilled holes. 4.
ASSEMBLY MODEL # AXWSH003-72BL STEP-7 2 ntaAv/ ontrF tnavA / tnorF tnavA / tnorF CR Ava/onFrt 3 CL Ava/onFrt DL H Ava/onFrt G DR 1. Insert 4 Dowels 3 into guide holes on Top Shelf G (2 dowels on each side). 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 6 Cam Lock Pins 2 to Dividers CL , CR using pre-drilled holes (3 pins on each Divider). 4. Align Cam Lock Pins with guide holes on Top Shelf G . 5.
ASSEMBLY MODEL # AXWSH003-72BL STEP-8 Aanvt/ontrF Aanvt/ontrF Aanvt/ontrF CR DR F FronA/tvant Aanvt/ontrF CL Aanvt/ontrF Aanvt/ontrF DL 1 4 FronA/tvant 3 1 1. Insert 2 Dowels 3 into guide holes on bottom of each Divider CL , CR and Middle Divider DL , DR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Bottom Shelf F to Dividers CL , CR and Middle Dividers DL , DR using 12 Allen Key Screws 1 . 4.
ASSEMBLY MODEL # AXWSH003-72BL STEP-9 Ava/onFrt BR Ava/onFrt F Ava/onFrt M Ava/onFrt M BL 3 16 2 1. Insert 4 Dowels 3 into guide holes on Bottom Shelf F . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 3 Cam Lock Pins 2 to each Side BL , BR using pre-drilled holes. 4. Align Cam Lock Pins with guide holes on Bottom Shelf F . 5. Insert 6 Cam Locks 2 into guide holes on Bottom Shelf F . 6.
ASSEMBLY MODEL # AXWSH003-72BL STEP-10 FroAn/tvant 3 1 4 E BL ntaAv/ ontrF ntaAv/ ontrF 3 CL ntaAv/ ontrF CR ntaAv/ ontrF ntaAv/ ontrF A FroAn/tvant FroAn/tvant BR 1 4 1. Insert 2 Dowels 3 into guide holes on each Side BL , BR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Top A to Sides BL , BR , Dividers CL , CR and Top Divider E using 15 Allen Key Screws 1 (3 screws on each Side and Divider). 4.
ASSEMBLY MODEL # AXWSH003-72BL STEP-11 ntaAv/ ontrF L1 LR ntaAv/ ontrF LL L2 Warning Label ntaAv/ ontrF L1 LR ntaAv/ ontrF L2 LL 5 1. Attach Back Panels LL,LR , L1 , L2 to back frame of TV using 36 Phillips Screws Round Head 5 through guide holes. 2. Use Phillips Screwdriver to tighten screws.
ASSEMBLY MODEL # AXWSH003-72BL STEP-12 10 11 J 1. Attach Adjustable Hinges 11 to Doors J and K using Phillips Screws 10 into pre-drilled holes on Doors J and K . K H BR J K N BL J K 11 12 10 13 2. Attach Adjustable Hinges on Doors J to Sides BL , BR using Phillips Screws 10 into pre-drilled holes on Sides BL , BR . 3. Attach Adjustable Hinges on Doors K to Dividers CL , CR using Phillips Screws 10 into pre-drilled holes on Dividers CL , CR . 4.
ASSEMBLY MODEL # AXWSH003-72BL IMPORTANT NOTE: 10 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXWSH003-72BL STEP-13 7 15 14 A BR J DR BL K J K F N 8 14 15 9 8 9 1.AttachMagnetPlates9tobottomcornerofLargeDoorsJ,SmalDoorsK usingPhilpsScrews8intopre-driledholesonLargeDoorsJ,SmalDoorsK. 2.AttachMagnets9usingPhilpsScrews8intopre-driledholesonBottomShelfF. 3.AttachLatch15toFlipDownDoorNusingPhilpsScrews14intopre-driledholes. 4.AttachLatch15toRightMiddleDividerDRusingPhilpsScrews14intopre-driledholes. 5.UsePhilpsscrewdrivertosnuglytightenscrew. 6.
ASSEMBLY MODEL # AXWSH003-72BL STEP-14 shelf level 1 6 shelf support anti - tipping shelf level 2 shelf level 3 6 I I I I 1. Use 4 Shelf Supports 6 for each Cabinet Shelf I in desired location. 2. 2 Shelf Supports 6 may be used on back top of each Cabinet Shelf I as a tipping restraint.
ASSEMBLY MODEL # AXWSH003-72BL STEP-15 1. Insert assembled drawer into glides on assembled TV.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.