User Manual

ManualsBrandsBroMax Communications ManualsElectronics11M WLAN MEETING GATEWAY

Dr.Show Meeting Gateway

Quick Start Guide

A)Connect the Meeting Gateway

1.Plug one end of a

standard UTP

Ethernet cable into

the Meeting

Gateway's LAN Port.

2.Connect the other end

of the Ethernet cable

into a networked hub

or switch.

3.Connect your

projector to the

Meeting Gateway's

Video (VGA) port

with the VGA cable

came with your

projector.

Plug one end of the VGA cable to the M

connect the other end to the computer in

4.Plug the power adapter cord into the

Meeting Gateway's Power port.

5.Plug the power adapter into a power outl

6.Press the Power Switch to turn on the

Meeting Gateway.

7.Power on the projector and select its inp

from the computer port. The Meeting

Gateway's on-screen menu will show o

B)Configure the Meeting Gat

The on-screen menu requires the IR remote c

keyboard connected to the Meeting Gateway.

1.Select the System Setup

menu.

2.Enter the administration

password (default is

654321)

Summary of content (5 pages)

PAGE 1
Plug one end of the VGA cable to the M connect the other end to the computer in Dr.Show Meeting Gateway Quick Start Guide 4.Plug the power adapter cord into the Meeting Gateway's Power port. 5.Plug the power adapter into a power outl 6.Press the Power Switch to turn on the Meeting Gateway. 7.Power on the projector and select its inp from the computer port.
PAGE 2
3.Change the IP settings to valid values for your LAN. 4.Change the wireless settings (ESSID, Channel, WEP) if necessary. Use a different name and Channel from nearby Access Points. 4.The Meeting Gateway Player utility is now installed. Select Yes to launch the player after the installation. Click the Finish button. A Meeting Gateway Player icon will show on your desktop. C)Install the Player Utility You need the Player Utility on your computer to use the Meeting Gateway. 1.
PAGE 3
4.After the search, the List Panel will appear. 5.Click on the drop down button at the right side of the entry box. A list of all the Meeting Gateways found will appear. 6.Please highlight one of the available Meeting Gateway to select the Meeting Gateway to use. 7.Click Next to enter the Player Panel. !Click Play will start to show the computer's desktop to the Meeting Gateway. Click Stop to stop sending screen updates to the Meeting Gateway.
PAGE 4
is for other wireless devices to identify and join the Meeting Gateway. IF there is multiple wireless Meeting Gateway nearby, you should set an unique name for each Meeting Gateway. 5.Click the Encryption Tab. The Encryption page allows you to set or change the encryption keys for the WEP. If you turn on the WEP of the Meeting Gateway, all other wireless devices want to connect to it should also use WEP and with the same encryption keys.
PAGE 5
FCC Caution: 1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.