Bluetooth Audio Transmitter (M S- 6868H) User’s Guide
FCC Caution 1. 2. 3. 4. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
End Product Labeling This transmitter module is authorized only for use in device where antenna may be installed such that 20 cm may be maintained between antenna and users (for example access points, routers, wireless ADSL and similar equipment). The final end product must be labeled in a area with the following: “Contains TX FCC ID: GI4L-MS6868H”. Manual Information for End Users The end user must not have manual instructions to remove or install device.
Bluetooth Audio Transmitter (MS-6868H) Introduction >>> 2.
>>> 2.2 Features A Bluetooth Audio Transmitter with 3.5mm audio plug. General Features General Power Source Li-Polymer rechargeable Storage Temperature 0° C - 70° C Operating Temperature 5° C - 55° C Low Battery Indicator Green LED will blink twice rapidly in succession for every 5 sec interval. LED One Bi-Color LED (Blue-Device in Bluetooth operation/Green-Stand-by stage) or Separated LEDs Buttons Power/Pair Button Auto-Power Off Device will auto-power off after 3 minutes in standby mode.
Chipset CSR BC03MM or equivalent Audio Codec Sub-Band Codec (SBC) Distance 10 Meters Play Time Playtime Audio Streaming Up to 7 hours Standby Up to 100 hours Battery Charging MS-6868H is equipped with high quality Li-polymer battery. The battery duration could be up to 7 hours of music listening after 3.5 hours of full charging. Make sure of power sufficiency each time when you are about to use MS-6868H.
>>> 2.