Installation Instructions

ManualsBrandsBroadcom ManualsElectronicsBluetooth Transceiver Module

Quick Start Guide

Bluetooth

Transceiver Module, UGPZ9

Thank you for purchasing a

Bluetooth Transceiver Module. Before you

begin to use the Bluetooth

Transceiver Module, you will require the following

items:

A computer with an internal USB port and one of the following operating systems:

Microsoft

Windows

XP or Windows 2000.

The Software Installation Compact Disc included with your

Bluetooth

Transceiver Module.

Note: This module is not intended for installation by end users.

Step 1: Installing the Software

NOTE: This installation is required before you insert the module into the USB

port of your computer.

1. Insert the Bluetooth

Transceiver Module installation compact

disc (CD) into the CD-ROM or DVD drive of your computer.

2. If the Main Menu screen appears automatically, select Install

software and click OK. If the Main Menu screen does not appear

automatically, click Start, click Run, type x:\setup.exe (where x is the

CD-ROM or DVD drive letter of your computer), and click OK.

3. Click Next, click Finish, and then restart your computer.

4. Right-click the Bluetooth icon

in the taskbar notification area (system

tray) and click Start Using Bluetooth. Follow the instructions provided

by the Initial Bluetooth Configuration Wizard.

ENGLISH

Summary of content (6 pages)

PAGE 1
Bluetooth® Transceiver Module, UGPZ9 ENGLISH Quick Start Guide Thank you for purchasing a Bluetooth Transceiver Module. Before you begin to use the Bluetooth Transceiver Module, you will require the following items: A computer with an internal USB port and one of the following operating systems: Microsoft® Windows® XP or Windows 2000. The Software Installation Compact Disc included with your Bluetooth Transceiver Module. Note: This module is not intended for installation by end users.
PAGE 2
If you started at Step 1: Installing the Software ENGLISH Step 2: Inserting the Module Make sure that the Bluetooth Transceiver Module is properly inserted inside your computer. The Found New Hardware Wizard detects and installs the device. When the installation is finished, you are ready to begin using the Bluetooth features of this computer. If you skipped Step 1: Installing the Software, you are ready to begin using the Bluetooth features of this computer.
PAGE 3
Regulatory Statements for UGPZ9 USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
PAGE 4
Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence. Caution: Exposure to Radio Frequency Radiation.
PAGE 5
Europe—EU Declaration of Conformity and Restrictions Hereby, Broadcom Corp, declares that this equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment is marked with the symbol and can be used throughout the European community.
PAGE 6
NCC Statement 低功率電波輻性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。