User's Manual

ManualsBrandsBroadcom ManualsComputers & AccessoriesBroadcom 802.11a/g Mini PCI Card

DRAFT Revised: 8/24/04

File: Title.fm

PN: HP-367426-001

hp CONFIDENTIAL

August 24, 2004 4:01 pm

Hardware and Software

Guide

HP Tablet PC Series

Document Part Number: 367426-001

December 2004

Summary of content (224 pages)

PAGE 1
DRAFT Revised: 8/24/04 File: Title.
PAGE 2
PAGE 3
DRAFT Revised: 8/24/04 File: Notice-Front.fm PN: HP-367186-001 © 2004 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice.
PAGE 4
PAGE 5
DRAFT Revised: 8/24/04 File: 367426-001TOC.fm PN: HP-367186-001 Contents Contents 1 Tablet PC Features Pen Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Pointing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4 Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
DRAFT Revised: 8/24/04 File: 367426-001TOC.fm PN: HP-367186-001 Contents Using the Default Power Settings . . . . . . . . . . . . . . . . . . 2–8 Turning the Tablet PC or Display On or Off. . . . . . . 2–8 Initiating or Restoring from Hibernation. . . . . . . . . . 2–9 Initiating or Resuming from Standby . . . . . . . . . . . 2–10 Using Emergency Shutdown Procedures . . . . . . . . 2–11 Managing Power Options. . . . . . . . . . . . . . . . . . . . . . . . 2–11 Accessing the Power Options Window . . . . .
PAGE 7
DRAFT Revised: 8/24/04 File: 367426-001TOC.fm PN: HP-367186-001 Contents 3 Pointing Devices and Keyboard Using a Pointing Device. . . . . . . . . . . . . . . . . . . . . . . . . . 3–1 Using the Pointing Stick . . . . . . . . . . . . . . . . . . . . . . 3–2 Using the TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . 3–3 Using an External Mouse . . . . . . . . . . . . . . . . . . . . . 3–4 Setting Pointing Device Preferences . . . . . . . . . . . . . 3–4 Using Hotkeys . . . . . . . . . . . . . . .
PAGE 8
DRAFT Revised: 8/24/04 File: 367426-001TOC.fm PN: HP-367186-001 Contents Command Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6 Identifying Command Controls . . . . . . . . . . . . . . . . . 4–6 Command Controls Quick Reference . . . . . . . . . . . . 4–7 Using Command Controls . . . . . . . . . . . . . . . . . . . . . 4–8 Setting Command Control Preferences . . . . . . . . . . 4–11 On-Screen Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
DRAFT Revised: 8/24/04 File: 367426-001TOC.fm PN: HP-367186-001 Contents Using PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–9 Inserting a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . 6–10 Removing a PC Card . . . . . . . . . . . . . . . . . . . . . . . . 6–11 Using SD Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–12 Inserting an SD Card . . . . . . . . . . . . . . . . . . . . . . . . 6–12 Removing an SD Card. . . . . . . . . . . . . . . .
PAGE 10
DRAFT Revised: 8/24/04 File: 367426-001TOC.fm PN: HP-367186-001 Contents Desktop Video Profiles . . . . . . . . . . . . . . . . . . . . . . . . . Identifying Profiles and Modes . . . . . . . . . . . . . . . . Using the Default Profiles . . . . . . . . . . . . . . . . . . . . Enabling the Default Profiles . . . . . . . . . . . . . . . . . Customizing the Profiles (Optional) . . . . . . . . . . . . Change Mode Service . . . . . . . . . . . . . . . . . . . . . . . . . . Tablet PC Button Driver . . . . . . .
PAGE 11
DRAFT Revised: 8/24/04 File: 367426-001TOC.fm PN: HP-367186-001 Contents Using Power-On Passwords. . . . . . . . . . . . . . . . . . . . . . . 9–6 Setting Power-On Passwords. . . . . . . . . . . . . . . . . . . 9–6 Entering Power-On Passwords . . . . . . . . . . . . . . . . . 9–7 Requiring a Power-On Password at Restart . . . . . . . 9–7 Using HP Administrator Passwords. . . . . . . . . . . . . . . . . 9–8 Setting HP Administrator Passwords . . . . . . . . . . . . . . . .
PAGE 12
Contents 11 Computer Setup Using Computer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Computer Setup . . . . . . . . . . . . . . . . . . . Restoring Computer Setup Defaults . . . . . . . . . . . . Selecting from the File Menu . . . . . . . . . . . . . . . . . Selecting from the Security Menu . . . . . . . . . . . . . . Selecting from the Tools Menu . . . . . . . . . . . . . . . . Selecting from the Advanced Menu . . . . . . . . . . . .
PAGE 13
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 1 Tablet PC Features Pen Components Component Description 1 Interacts with the tablet PC whenever the tip is touching the screen or within 1.27 cm (0.5 inch) of the screen. When tapped on or held over a pen-activated button, activates the button.
PAGE 14
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 2 Pen button Functions like the right button on an external mouse. 3 Pen tether eyelet Used with the tether eyelet on the tablet PC, enables you to tether the pen to the tablet PC. Top Components Lights 1–2 Component Description 1 Volume mute light On: System sound is turned off. 2 caps lock light On: Caps lock is on. 3 IDE drive light On: A drive in the hard drive bay is being accessed.
PAGE 15
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 4 Battery charge light Amber: A battery pack is charging. Green: A battery pack is close to full charge capacity. Blinking amber: A battery pack that is the only available power source has reached a low-battery condition. When the battery reaches a critical low-battery condition, the battery light begins blinking more quickly.
PAGE 16
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Pointing Devices 1–4 Component Description 1 Pointing stick Moves the pointer and selects or activates items on the screen. 2 Right pointing stick button Functions like the right button on an external mouse. 3 Touchpad scroll zone* Scrolls upward or downward. 4 Right TouchPad button* Functions like the right button on an external mouse. 5 Left TouchPad button* Functions like the left button on an external mouse.
PAGE 17
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 6 TouchPad* Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking. 7 Left pointing stick button Functions like the left button on an external mouse. *This table describes default settings.
PAGE 18
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 3 Volume down button Decreases tablet PC sound. 4 Volume up button Increases tablet PC sound. 5 Pen eject button Ejects the pen from the pen holder. Pen-Activated Buttons Component Description 1 Tablet PC Input launch When Windows is running, opens the Microsoft Tablet PC Input Panel application, which includes a handwriting pad and an on-screen keyboard.
PAGE 19
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 2 Rotate button* Switches the image between landscape and portrait orientation. 3 Q Menu button* When Windows is running, opens or closes the Q Menu. *This table describes default settings. For information about changing the functions of the Tablet PC Input launch button, rotate button, and Q Menu button, refer to Chapter 4, “Pen and Command Controls.
PAGE 20
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features 1–8 Component Description 3 Windows applications key Displays a shortcut menu for items beneath the pointer. 4 WIndows logo key Displays the Microsoft Windows Start menu. 5 fn key Executes frequently used system functions when pressed in combination with a function key or the esc key.
PAGE 21
DRAFT Revised: 8/24/04 File: Chap1.
PAGE 22
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 1 Infrared port Provides wireless communication between the tablet PC and an optional IrDA-compliant device. 2 Bluetooth® antenna* Sends and receives Bluetooth device signals. Å 3 Display release latch Exposure to Radio Frequency Radiation. The radiated output power of this device is below the FCC radio frequency exposure limits.
PAGE 23
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Rear Components Component Description 1 USB port Connects USB 1.1- and 2.0-compliant devices to the tablet PC using a standard USB cable, or connects an optional external MultiBay or MultiBay II to the tablet PC. The external MultiBay must also be connected to an external power source. 2 RJ-11 (modem) jack Connects a modem cable. 3 RJ-45 (network) jack Connects a network cable.
PAGE 24
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 6 S-Video out jack Is a 7-pin, dual-purpose jack. It connects an optional S-Video device, such as a television, VCR, camcorder, overhead projector, or video capture card, with an optional, standard (4-pin) S-Video cable. The extra 3 pins also enable an optional S-Video-to-composite adapter to be used with the tablet PC.
PAGE 25
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Right-Side Components Component Description 1 Audio-out (headphone) jack Produces system sound when connected to optional powered stereo speakers, headphones, headset, or television audio. 2 Audio-in (microphone) jack Connects an optional monaural or stereo microphone. 3 USB port Connects USB 1.1- and 2.
PAGE 26
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 4 Ejects PC Cards from the PC Card slot. PC Card eject button 5 PC Card slot Supports optional Type I, Type II, or Type III 32-bit (CardBus) or 16-bit PC Cards. 6 SD Card slot Accepts SD (Secure Digital) Memory Cards.
PAGE 27
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Left-Side Components Component Description 1 Security cable slot Attaches an optional security cable to the tablet PC. Ä 2 Vent Security solutions are designed to act as deterrents. These deterrants may not prevent a product from being mishandled or stolen. Enables airflow to cool internal components. Ä 3 Wireless button* To prevent overheating, do not obstruct vents.
PAGE 28
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Component Description 4 USB port Connects USB 1.1- and 2.0-compliant devices to the tablet PC using a standard USB cable, or connects an optional external MultiBay or external MultiBay II to the tablet PC. The external MultiBay must be connected to an external power source.
PAGE 29
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Bottom Components Component Description 1 Docking connector Connects the tablet PC to an optional docking device. 2 Vents (3) Enable airflow to cool internal components. Ä To prevent overheating, do not obstruct vents. Using the tablet PC on a soft surface, such as a pillow, blanket, rug, or thick clothing, may block airflow. 3 Travel battery connector Connects an optional travel battery.
PAGE 30
DRAFT Revised: 8/24/04 File: Chap1.fm PN: HP-367426-001 Tablet PC Features Additional Hardware Components Component Description 1 AC adapter Converts AC power to DC power. 2 Power cord* Connects an AC adapter to an AC wall outlet. 3 Primary battery pack* Runs the tablet PC when the tablet PC is not connected to external power. 4 Modem adapter* Adapts the modem cable for a non-RJ-11 telephone jack. 5 Modem cable* Connects a modem to a telephone jack or a country-specific modem adapter.
PAGE 31
DRAFT Revised: 8/24/04 File: Chap2.
PAGE 32
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Component Description 1 fn+f3 Initiates Standby. 2 Power/standby switch When the tablet PC is ■ Off, slide to the left and release to turn on the tablet PC. ■ In Standby, slide to the right or left and release to exit Standby. ■ In Hibernation, slide to the right or left and release to exit Hibernation. ■ On, slide to the right and release to enter Standby.
PAGE 33
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Component Description 4 Standby light Blinking green: The tablet PC is in Standby mode. 5 Power/standby light Green: The tablet PC is on. Blinking green: The tablet PC is in Standby mode. 6 Battery light Amber: A battery pack is charging. Green: A battery pack is close to full charge capacity. Blinking amber: A battery pack that is the only available power source has reached a low-battery condition.
PAGE 34
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Selecting a Power Source The tablet PC can run on internal or external AC power. The following table indicates the best power sources for common tasks.
PAGE 35
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Standby and Hibernation Standby and Hibernation are energy-saving features that conserve power and reduce startup time. They can be initiated by you or by the system. Refer to the “Initiating Standby, Hibernation or Shutdown” section in this chapter for details about when to use each setting. Standby Ä CAUTION: To avoid a complete battery discharge, do not leave your tablet PC in Standby for extended periods.
PAGE 36
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Hibernation is enabled, select Start > Control Panel > Power Options > Hibernate tab. Make sure that the Enable hibernate support check box is selected. Ä CAUTION: If the configuration of the tablet PC is changed during Hibernation, resuming from Hibernation may not be possible. When the tablet PC is in Hibernation: ■ Do not dock or undock the tablet PC in a docking device. ■ Do not add or remove memory modules.
PAGE 37
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power When the Power Supply Is Uncertain Make sure that Hibernation remains enabled, especially if you are operating the tablet PC on battery power and do not have access to an external power supply. If the battery pack fails, Hibernation saves your work to a hibernation file and shuts down the tablet PC. HP recommends that if you pause your work when the power supply is uncertain, you do one of the following: ■ Initiate Hibernation.
PAGE 38
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Using the Default Power Settings The following tables describe the factory power settings on the tablet PC. You can change many of these settings according to your preference. For more information on changing power settings, refer to the “Managing Power Options” section in this chapter. Turning the Tablet PC or Display On or Off Task Procedure Result Turn on the tablet PC. Slide the power/standby switch to the left.
PAGE 39
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Initiating or Restoring from Hibernation Task Procedure Result Initiate Hibernation. ■ Select Start > Shut Down> Hibernate > OK. (If the Hibernate option is not displayed, press and hold the shift key.) ■ The power light and power/standby light are turned off. ■ If Hibernation has been configured, slide the power/standby switch to the right or left. ■ The screen clears. ■ The power light and power/standby light are turned off.
PAGE 40
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Initiating or Resuming from Standby Task Procedure Result Initiate Standby. ■ Slide the power/standby switch to the right. ■ ■ With the tablet PC on, press fn+f3. The power light and power/standby light blink. ■ The screen clears. ■ The standby light and power/standby light blink. ■ The screen clears. ■ The standby light and power/standby light are turned off. ■ Your work returns to the screen.
PAGE 41
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Using Emergency Shutdown Procedures Ä CAUTION: Emergency shutdown procedures result in the loss of unsaved data. If the tablet PC is unresponsive and you are unable to use normal Windows shutdown procedures, try the following emergency procedures, in the sequence provided: ■ Press ctrl+alt+delete. Select Shut Down. ■ Slide and hold the power/standby switch to the left for at least 5 seconds.
PAGE 42
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Accessing the Power Options Window To access the Power Options window, double-click the Power Meter icon on the taskbar, or select Start > Control Panel > Power Options. Displaying the Power Meter Icon The Power Meter icon is on your taskbar by default. The icon changes shape to indicate whether the tablet PC is running on a battery pack or external power. Double-click the icon to display the Power Options window.
PAGE 43
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power To set a power scheme: 1. Access the Power Options window, and then select the Power Schemes tab. 2. Select the power scheme you wish to modify, and adjust options in the lists on the screen. 3. Select Apply. Using a Security Password You can add a security feature that prompts you for a password when the tablet PC is turned on or restores from Standby or Hibernation.
PAGE 44
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power The power scheme you select determines how the processor performs when the tablet PC is connected to external power or is running on battery power. Each power scheme for external power or battery power sets a specific processor state. Different states may be used, depending on whether the tablet PC is running on external or battery power.
PAGE 45
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Processor Performance While on External Power Processor Performance While on Battery Power Always On Always runs at the highest performance state. Always runs at the highest performance state. Minimal Power Management Performance state is determined based on CPU demand. Performance state is determined based on CPU demand. Max Battery Performance state is determined based on CPU demand.
PAGE 46
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power However, battery packs in the tablet PC slowly discharge when the tablet PC is turned off. For this reason, the primary battery pack is not shipped inside the tablet PC and must be inserted before the tablet PC can run on battery power. Identifying Battery Packs This tablet PC supports up to 2 battery packs: ■ The primary battery pack is a 6-cell lithium-ion battery pack that can be used only in the battery bay.
PAGE 47
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power 3. Press the battery pack 2 into the tablet PC.
PAGE 48
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power To remove a primary battery pack: 1. Turn the tablet PC upside down with the battery bay toward you. 2. Press the battery release latch 1 to the right. 3. Slide the battery pack 2 out of the tablet PC. Attaching or Detaching an Optional Travel Battery To attach an optional travel battery: 1. Turn the tablet PC upside down with the primary battery bay toward you.
PAGE 49
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power 2. Open the travel battery connector on the bottom of the tablet PC by sliding the cover to the right.
PAGE 50
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power 3. Insert the tabs on the travel battery caddy into the recesses on the bottom of the tablet PC 1. 4. Press the travel battery caddy onto the tablet PC until it snaps into place 2. 5. Slide the locking latch 3.
PAGE 51
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power To detach an optional travel battery: 1. Unlock the travel battery from the tablet PC by sliding the locking switch 1. 2. Press the release latch 2. 3. Lift the travel battery 3 up and away from the tablet PC. Charging Battery Packs Multiple battery packs in the system charge and discharge in a preset sequence: ■ Charge sequence: 1. Primary battery in the tablet PC battery bay 2. Travel battery ■ Discharge sequence: 1. Travel battery 2.
PAGE 52
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power While a battery pack is charging, the battery light on the tablet PC is on. The light is turned off when all battery packs are fully charged. packs can also be charged in the optional HP Universal ✎ Battery Charger. Charging the Primary Battery Ä CAUTION: To prevent damage to the tablet PC and aircraft systems, do not charge the battery pack while you are using an Auto/Air/AC Adapter on an aircraft.
PAGE 53
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power ■ Optional 90W Air/Auto/AC Combo Adapter optional Aircraft Power Adapter can run the tablet PC, but it ✎ An cannot charge a battery pack. Charging an Optional Travel Battery The battery pack in the travel battery charges when it is attached to the tablet PC and the tablet PC is connected to external power.
PAGE 54
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power ■ Allow a battery pack to discharge to 10 percent of a full charge through normal use before charging it. ■ When you charge a battery pack, charge it fully. Monitoring the Charge of a Battery Pack This section explains several ways you can determine the amount of charge in your battery pack.
PAGE 55
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Viewing Charge Displays To view information about the status of any battery pack in the tablet PC: ■ Select the Power Meter icon on the taskbar. -or- ■ Select Start > Control Panel > Power Options > Power Meter tab. Interpreting Charge Displays Most charge displays report battery status as both a percentage and as the number of minutes of charge remaining. ■ The percentage indicates the amount of charge remaining in the battery pack.
PAGE 56
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Identifying Low-Battery Conditions This section explains how to identify low and critical low-battery conditions. Low-Battery Condition When a battery pack that is the only power source for the tablet PC reaches a low-battery condition, the battery light blinks. Critical Low-Battery Condition If a low-battery condition is not resolved, the tablet PC enters a critical low-battery condition.
PAGE 57
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power When External Power Is Available To resolve a low-battery condition when external power is available, do one of the following: ■ Connect the AC adapter. ■ Plug an optional Automobile Power Adapter/Charger into the tablet PC and into a vehicle cigarette lighter receptacle.
PAGE 58
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power 2. Exit Hibernation by pressing the power/standby switch to the right or left. Calibrating a Battery Pack This section describes when and how to calibrate a battery pack. When to Calibrate Even if a battery pack is heavily used, it should not be necessary to calibrate it more than once a month. It is not necessary to calibrate a new battery pack before first use.
PAGE 59
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Discharging the Battery Pack Before you begin a full discharge, disable Hibernation. To disable Hibernation: 1. Select Start > Control Panel > Power Options > Hibernate tab. 2. Clear the Enable Hibernation check box. 3. Select Apply. The tablet PC must remain on while the battery pack is being discharged. The battery pack can discharge whether or not you are using the tablet PC, but will discharge faster while the tablet PC is in use.
PAGE 60
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power 4. Select OK. 5. Disconnect the tablet PC from the external power source, but do not turn off the tablet PC. 6. Run the tablet PC on battery power until the battery pack is fully discharged. The battery light begins to blink when the battery pack has discharged to a low-battery condition. When the battery pack is fully discharged, the battery light is turned off and the tablet PC shuts down.
PAGE 61
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Conserving Battery Power Using the battery conservation procedures and settings described in this section extends the time that a battery pack can run the tablet PC from a single charge. Conserving Power As You Work To conserve power as you use the tablet PC: ■ Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them.
PAGE 62
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Selecting Power Conservation Settings To set the tablet PC to conserve power: ■ Select a short wait for the screen saver and select a screen saver with minimal graphics and motion. To access screen saver settings, select Start > Control Panel > Display > Screen Saver tab. ■ Select a Power Scheme with low-power-use settings through the operating system. Refer to the “Setting or Changing a Power Scheme” section in this chapter.
PAGE 63
DRAFT Revised: 8/24/04 File: Chap2.fm PN: HP-367186-001 Power Disposing of a Used Battery Pack Å WARNING: There is a risk of fire and chemical burn if a battery pack is handled improperly. Do not disassemble, crush, or puncture a battery pack or short the contacts on a battery pack. Do not expose a battery pack to temperatures higher than 60°C (140°F), or dispose of a battery pack in water or fire.
PAGE 64
DRAFT Revised: 8/24/04 File: Chap2.
PAGE 65
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 3 Pointing Devices and Keyboard Using a Pointing Device The pointing stick and TouchPad controls can be used interchangeably. Component Description 1 Pointing stick Moves the pointer and selects or activates items on the screen. 2 Right pointing stick button Functions like the right button on an external mouse. 3 Touchpad scroll zone* Scrolls upward or downward.
PAGE 66
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Component Description 4 Right TouchPad button* Functions like the right button on an external mouse. 5 Left TouchPad button* Functions like the left button on an external mouse. 6 TouchPad* Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking.
PAGE 67
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard To change the pointing stick cap: 1. Turn off the tablet PC. 2. Gently pull off the used pointing stick cap. 3. Press a replacement cap into place. ✎ Replacement caps are not included with the tablet PC. Using the TouchPad To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go.
PAGE 68
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Using an External Mouse An external USB mouse can be connected to the tablet PC using one of the ports on the right or left side of the tablet PC. An external serial mouse can be connected to the serial port on the right side of the tablet PC. An external PS/2 or USB mouse can be connected to the system using the connectors on an optional docking device.
PAGE 69
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Using Hotkeys Hotkeys are preset combinations of the fn key 1, one of the function keys 2, or the esc key 3, The icons on the f3, f4, and f8 through f10 keys represent the hotkey functions. Hotkey functions and procedures are discussed in the following sections.
PAGE 70
DRAFT Revised: 8/24/04 File: Chap3.
PAGE 71
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Switching Displays (fn+f4) The fn+f4 hotkey switches the image among display devices connected to the external monitor connector or the S-Video jack on the tablet PC. For example, if an external monitor is connected to the tablet PC, pressing the fn+f4 hotkey multiple times toggles the image between the tablet PC display, the external monitor display, and a simultaneous display on both the tablet PC and the monitor.
PAGE 72
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Decreasing Screen Brightness (fn+f9) Press fn+f9 to decrease screen brightness. Hold down the hotkey to decrease the brightness level incrementally. Increasing Screen Brightness (fn+f10) Press fn+f10 to increase screen brightness. Hold down the hotkey to increase the brightness level incrementally. Ambient Light Sensor (fn+f11) Press fn+f11 to turn on and off the ambient light sensor.
PAGE 73
DRAFT Revised: 8/24/04 File: Chap3.
PAGE 74
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Item Component 1 fn key 2 num lock light 3 num lk key 4 Embedded numeric keypad Enabling and Disabling the Embedded Numeric Keypad Press fn+num lk to enable the embedded numeric keypad. The num lock light is turned on. Press fn+num lk again to return the keys to their standard keyboard functions.
PAGE 75
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Switching Key Functions on the Embedded Numeric Keypad You can temporarily switch the functions of keys on the embedded numeric keypad between their standard keyboard functions and their keypad functions by using the fn key or the fn+shift key combination. ■ To change the function of a keypad key to keypad functions while the keypad is off, press and hold the fn key while pressing the keypad key.
PAGE 76
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Enabling or Disabling Num Lock Mode As You Work To turn num lock on or off on an external keypad as you work, press the num lk key on the external keypad, not on the tablet PC. Using Presentation Mode The Presentation mode button toggles Presentation mode on and off. Turning Presentation mode on opens an application, folder, file, or Web site that you specify.
PAGE 77
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard ✎ ■ If you do not select this option, each time you press the Presentation mode button, the Presentation Settings dialog box displays and you have to select Continue to open the program, application, folder, file, or Web site you have selected to start when the button is pressed. Automatically switch to an external display. You can modify the Presentation mode settings using the Quick Launch Button control panel.
PAGE 78
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Item Component Description 1 Presentation mode button 2 HP Information Center button content to come. Starts Presentation mode, which optimizes for an external monitor or projects and opens a user-defined program such as Microsoft PowerPoint. Quick Launch Buttons Control Panel You can use the Quick Launch Buttons control panel to ■ Change Presentation mode settings.
PAGE 79
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Setting Presentation Mode Preferences Setting the Presentation Mode Button To set an application, folder, file, or Web site to start when the Presentation mode button is pressed: 1. Open the Quick Launch Buttons control panel: ❏ Select Start > Control Panel > Printers and Other Hardware > Quick Launch Buttons.
PAGE 80
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard 3. Select an option from the drop-down list box, or select Power Options to open the Microsoft Power Options control panel to view or change the current power scheme. 4. To save your preferences and close the display, select OK. Showing the Welcome Screen You can choose to show the Quick Launch Buttons Properties dialog box each time you press the Presentation mode button. By default, this option is turned off.
PAGE 81
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Setting Advanced Preferences You can set the icon and ambient light sensor in the Quick Launch Button control panel. Displaying the Quick Launch Buttons Icon To show or hide the Quick Launch Buttons Properties icon in the notification area (at the far right of the taskbar) or your Windows desktop: 1.
PAGE 82
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard Setting the Ambient Light Sensor The tablet PC features a built-in light sensor that enables the tablet PC to automatically adjust the screen brightness according to the ambient lighting level. When the lighting of your environment changes, the ambient light sensor detects the change and automatically adjusts the screen brightness.
PAGE 83
DRAFT Revised: 8/24/04 File: Chap3.fm PN: HP-367186-001 Pointing Devices and Keyboard You can turn on and off the ambient light sensor using the Quick Launch Buttons software: 1. Open the Quick Launch Buttons software: ❏ Select Start > Control Panel > Quick Launch Buttons. -or❏ Select the Quick Launch Buttons icon in the notification area (at the far right of the taskbar) or Windows desktop. 2. Select the Advanced tab. 3. Select or clear the Enable Ambient Light Sensor check box. 4.
PAGE 84
DRAFT Revised: 8/24/04 File: Chap3.
PAGE 85
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 4 Pen and Command Controls You can enter and access information on the tablet PC by voice (supported in English only), pen, and command controls. This chapter provides information about using the pen and command controls. Pen You can write with the pen in pen-specific applications such as the Tablet PC Input Panel, in all Microsoft Office applications, and in most other Windows applications and utilities.
PAGE 86
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Entering Information with the Pen Identifying the Pen Tip and Pen Button The pen interacts with the tablet PC whenever the tip of the pen 1 is within 1.27 cm (0.5 inch) from the screen. The pen button 2 emulates the functions of the right-click button on an external mouse. Holding the Pen Hold the pen as if you were writing with a standard pen or pencil.
PAGE 87
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Performing Mouse Clicks with the Pen To select an item on the screen as you would with the left button of an external mouse: » Tap the item with the tip of the pen. To double-click an item on the screen as you would with the left button of an external mouse: » Tap the item twice with the tip of the pen.
PAGE 88
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Calibrating the Pen The pen can function at the default calibration or at a calibration set by another user. However, HP highly recommends that you use the pen only while it is calibrated to your personal handwriting and mouse action motions. Calibration optimizes pen performance for all users and particularly for left-handed users. To calibrate the pen: 1.
PAGE 89
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Using the Pen Holder To protect the pen when you are not using it, insert the pen, tip first, into the pen holder on the tablet PC. Setting Pen Preferences Pen preferences are set in the Tablet and Pen Settings window of the operating system. The preferences include settings that optimize handwriting recognition and the location of on-screen menus for either right-handed or left-handed users.
PAGE 90
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Command Controls The 5 command controls enable you to enter commands usually entered with keyboard keys while you are using the tablet PC without an external keyboard. The command controls can also be used while you are using the on-screen keyboard or an optional keyboard.
PAGE 91
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Command Controls Quick Reference The following table identifies the default setting and activation procedure for each command control. ■ To activate a pen-activated button, tap the button with the tip of the pen. ■ To activate a manually activated button, press and release the button.
PAGE 92
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Using Command Controls Tablet PC Input Panel Launch Button Tap the Tablet PC Input Panel launch button with the pen tip when the tablet PC is in Windows to open the Tablet PC Input Panel application. The Tablet PC Input Panel application displays a keyboard on the screen and can also display a writing pad, which supports handwriting.
PAGE 93
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Windows Security Button Press the Windows Security button with the pen tip or a small object like the end of a paper clip to enter the ctrl+alt+delete command while you are in Windows or the reset command while you are in the Setup utility.
PAGE 94
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Jog Dial Press or rotate the jog dial manually to enter commands or scroll vertically: ■ Press inward to simulate the function of the enter key on a standard keyboard. ■ Rotate upward or downward to scroll toward the top or bottom of an image. At the default setting, the jog dial scrolls line by line like the up and down arrow keys on a standard keyboard.
PAGE 95
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Setting Command Control Preferences All command controls except the Display Toggle button and the enter function of the jog dial can be customized to launch applications, simulate key combinations, or perform preset system functions. Each programmable command control can be assigned to 4 settings.
PAGE 96
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls In the primary views (Portrait-Primary and Landscape-Primary), the image switches clockwise between vertical and horizontal. In the secondary views (Portrait-Secondary and LandscapeSecondary), the image switches counterclockwise between vertical and horizontal. ■ Left-handed users may find the secondary views more convenient. ■ HP recommends that you not use a secondary view while using the internal wireless.
PAGE 97
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls Assigning or Changing a Preference To assign or change the function of a programmable command control: 1. Select Start > Control Panel > Printers and Other Hardware > Tablet and Pen Settings > Tablet Buttons tab. 2. In the Button Settings For field, select the view in which you want to use your preference. (The view is illustrated in the Button Location panel.) 3.
PAGE 98
DRAFT Revised: 8/24/04 File: Chap4.fm PN: HP-367186-001 Pen and Command Controls On-Screen Keyboard The Tablet PC Input Panel application displays a keyboard on the screen. This on-screen keyboard simulates the functions of an optional keyboard. To open the Tablet PC Input Panel application, tap the Tablet PC Input Panel launch button 1 with the pen. ■ To type, tap a key. ■ To switch the keys displayed in the top row between number keys and function keys, tap Func.
PAGE 99
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 5 Multimedia Using Audio Features The following figure and table describe the audio features of the tablet PC. Component Description 1 Volume mute button Turns off tablet PC sound. 2 Volume down button Decreases tablet PC sound. 3 Volume up button Increases tablet PC sound. 4 Internal microphone Records sound.
PAGE 100
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia Component Description 5 Audio-out (headphone) jack Produces system sound when connected to optional powered stereo speakers, headphones, headset, or television audio. 6 Audio-in (microphone) jack Connects an optional monaural or stereo microphone. 7 Speaker Produces tablet PC sound. Using the Audio-In (Microphone) Jack The tablet PC is equipped with a stereo microphone jack.
PAGE 101
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia The stereo (dual-channel) headphone jack is used to connect headphones, and also to connect the audio function of an audio/video device such as a television or VCR. When connecting a device to the headphone jack: ■ Use only a 3.5-mm stereo plug. ■ For best sound quality, use 24-ohm to 32-ohm headphones. ■ The internal speaker is disabled.
PAGE 102
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia ■ Windows volume control: 1. Click the Volume icon in the notification area (at the far right of the taskbar). 2. Increase or decrease the volume by moving the slider up or down. (You can also select the check box next to Mute to mute the volume.) - or 1. Double-click the Volume icon. 2. In the Volume Control column, increase or decrease the volume by moving the Volume slider up or down. You can also adjust the balance or mute the volume.
PAGE 103
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia The tablet PC can support one S-Video device connected to the S-Video out jack while simultaneously supporting an image on the tablet PC display and on any other supported external display. The S-Video connection usually provides an image of higher quality than a composite-video connection provides. To transmit video signals through the S-Video out jack, you need an S-Video cable, available from most electronics retailers.
PAGE 104
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia 2. Connect the other end of the cable to the video device, as instructed in the documentation included with the device. S-Video out jack on the tablet PC is not accessible because ✎ Ifthethetablet PC is docked into an optional docking device, you can connect the device to the S-Video out jack on the docking device.
PAGE 105
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia Using CD and DVD Software The following software is supported for use with the tablet PC: ■ Windows Media Player—Plays audio CDs and video DVDs and copies audio and data CDs. This software is included with the Windows operating system. ■ InterVideo WinDVD—Plays video CDs and DVD movies. This software is preinstalled on select tablet PCs.
PAGE 106
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia Installing Software To install software from a CD that is included with the tablet PC: 1. Insert an appropriate optical drive into an external MultiBay or MultiBay II. 2. Connect the tablet PC to a reliable AC outlet. 3. Close any open applications. 4. Insert a software CD into the optical drive. ❏ If Autorun is enabled, an installation wizard is displayed. ❏ If Autorun is disabled, select Start > Run. Enter: x:\setup.
PAGE 107
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia Enabling AutoPlay AutoPlay is an option in Windows that turns the Autorun feature on or off. Autorun starts a program or plays a title on a disc as soon as the disk is inserted into the drive and the drive door is closed. By default, AutoPlay is enabled on the tablet PC. To disable AutoPlay or to enable AutoPlay if the feature has been turned off, refer to your operating system documentation or visit the Microsoft Web site at: http://www.
PAGE 108
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia Using Windows Media Player Windows Media Player is included with the Windows operating system. It can be used to play CDs and DVDs and create audio and data CDs. To play a CD or DVD: 1. Insert the CD or DVD into the optical drive, and then close the tray. 2. Wait several seconds, and then: ❏ If AutoPlay is enabled, Windows Media Player is opened.
PAGE 109
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia WinDVD Creator Plus must be installed using a DVD/CD-RW or DVD+RW/R and CD-RW Combo Drive only. If you do not use one of the these drives, WinDVD Creator Plus will not be installed. For more information about WinDVD Creator Plus capabilities and instructions on creating DVDs and Video CDs, refer to the WinDVD Creator Plus online help after installing the software.
PAGE 110
DRAFT Revised: 8/10/04 File: Chap5.fm PN: HP-367186-001 Multimedia play the DVD, you must change the region setting on your DVD drive. DVD region settings can be changed through the operating system or through some DVD players. Changing Settings Using the Operating System To change settings through the operating system: 1. Open Device Manager by selecting Start > My Computer. Right-click in the window and select Properties > Hardware tab > Device Manager. 2.
PAGE 111
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 6 Wireless If your notebook is equipped with an integrated wireless device such as 802.11 or Bluetooth wireless devices, you have a wireless notebook. ■ An 802.11 wireless notebook can connect to wireless networks in corporate offices, your home, and public places. Wireless networks include wireless local area networks (WLANs) or “hotspots.
PAGE 112
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Your notebook has a button that may be used to enable and disable the 802.11 and Bluetooth wireless devices and an associated light to indicate the state of the wireless devices. The following illustration shows the wireless button 1 and light 2. In addition to the wireless button and light, your notebook has software controls that enable you to turn on, turn off, enable, and disable your wireless devices.
PAGE 113
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Wireless Local Area Network (Select Models Only) With the 802.11 wireless device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories linked by a wireless router or a wireless access point.
PAGE 114
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless 802.11b and 802.11g. For information on identifying the type of device in your notebook, refer to the “Identifying a WLAN Device” section in this chapter. Connecting Your Wireless Notebook to a Corporate WLAN Contact your network administrator or IT department for information on connecting your notebook to your corporate WLAN.
PAGE 115
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Setting Up a WLAN in Your Home To set up a WLAN and connect to the Internet in your home, you need the following equipment. The illustration below shows an example of a completed wireless network installation that is connected to the Internet. This wireless network includes ■ An optional broadband modem (either DSL or cable) and high-speed Internet service purchased from an Internet service provider (ISP) 1.
PAGE 116
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Using a WLAN Connection To use a WLAN connection: ■ Verify that all drivers required by the 802.11 wireless device are installed and that the 802.11 wireless device is correctly configured. ✎ If you are using an integrated 802.11 wireless device, all required drivers are installed and the adapter is preconfigured and ready for use. ■ If you are using an integrated 802.11 wireless device, verify that the 802.
PAGE 117
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Using Wireless Security Features When you set up your own WLAN or access an existing WLAN, always ensure that security features are protecting the WLAN. If you do not enable security on your WLAN, an unauthorized wireless user can access your notebook data and use your Internet connection without your knowledge. The most common security levels are Wi-Fi Protected Access (WPA)-Personal and Wired Equivalent Privacy (WEP).
PAGE 118
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Identifying a WLAN Device To install HP WLAN software for an integrated 802.11 wireless device, you need to know the name of the integrated 802.11 wireless device on your notebook. To identify an integrated 802.11 wireless device: 1. Display the names of all the 802.11 wireless devices on your notebook: a. Select Start > My Computer. b. Right-click in the My Computer window. c.
PAGE 119
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless The WLAN software is also available as a SoftPaq at the HP Web site. To access, download, and install the SoftPaq, use either of the following procedures: ■ Select Start > Help and Support. -or- ■ Visit the HP Web site at http://www.hp.com/support: a. Choose your language and region. b. Select the Download Drivers and Software radio button c. Enter your computer model information, and then follow the instructions provided at the Web site.
PAGE 120
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Bluetooth (Select Models Only) The Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as ■ Network access points. ■ Computers (desktop, notebook, PDA). ■ Phones (cellular, cordless, smart phone). ■ Imaging devices (printer, camera). ■ Audio devices (headset, speakers).
PAGE 121
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless ■ Bluetooth serial port—Transfers data over the Bluetooth link using a virtual COM port. ■ Hands-Free—Enables a vehicle-embedded, hands-free unit or a notebook serving as a hands-free unit to establish a wireless connection to a cellular phone and to act as the Bluetooth cellular phone audio input and output mechanism. ■ Basic imaging—Provides a wireless connection between a Bluetooth-enabled camera and other Bluetooth devices.
PAGE 122
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Turning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth Devices The wireless button 1 enables and disables 802.11 wireless and Bluetooth devices in conjunction with Wireless Assistant. By default, the 802.11 wireless and Bluetooth devices and wireless light 2 are turned on when you turn on the notebook. on a wireless device does not automatically create a ✎ Turning WLAN or connect you to a WLAN.
PAGE 123
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless You can enable and disable the wireless devices in Computer Setup. For more information about using Computer Setup to control the 802.11 and Bluetooth wireless devices, refer to Chapter 9, “Computer Setup.” You can also enable and disable the wireless devices with the wireless button.
PAGE 124
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless Turning On the 802.11 Wireless and Bluetooth Devices If And ■ Wireless Assistant shows that both WLAN and Bluetooth are off ■ Wireless light is off You want to turn on either or both devices Then 1. Right-click the Wireless Assistant icon in the notification area. 2. Select the device or devices you want to turn on.
PAGE 125
DRAFT Revised: 8/24/04 File: Chap6.fm PN: HP-376186-001 Wireless want your wireless devices to be turned on when you turn ✎ Ifonyou your notebook, you must turn them on before you shut down or restart. Turning Off and Disabling the 802.
PAGE 126
DRAFT Revised: 8/24/04 File: Chap6.
PAGE 127
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 7 Q Menu Software Q Menu The Q Menu provides quick access to many of the system tasks accessed with the buttons, keys, or hot keys found on most tablet PCs. You can program the Q Menu to access alternative system tasks or to any item on a drive, a network, or the Internet. Identifying Q Menu Controls The jog dial 1 and the Q Menu button 2 are used in Q Menu procedures.
PAGE 128
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Displaying and Closing the Q Menu The Q Menu can be displayed or closed at any time by using any of the following procedures: ■ To display the Q Menu, press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar). If the Q icon is not displayed in the notification area (at the far right of the taskbar): 1. Press the Q Menu button. 2. Select Q Menu Settings. 3.
PAGE 129
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software 4. Select OK. If the icon is not displayed, select Show Hidden Icons in the notification area (at the far right of the taskbar). ■ To close the Q Menu, press the Q Menu button or select anywhere outside of the Q Menu. For information about setting a pen-activated button to open and close the Q Menu, refer to Chapter 4, “Pen and Command Controls.
PAGE 130
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Setting Q Menu Preferences The Q Menu can display up to 40 items. Several system-defined items are displayed by default. Additional system-defined and user-defined items can be added. All items, including the default items, can be removed. The items on the Q Menu are managed from the Items to Display On Q Menu list.
PAGE 131
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Adding a Q Menu Item An item must be displayed on the Items to Display On Q Menu list before it can be added to the Q Menu. The Q Menu and the Items to Display on Q Menu list can include no more than 40 items. If the list currently contains 40 items, the Add button is dimmed and unavailable. If the Add button is unavailable, you must remove a listed item before you can add the new item.
PAGE 132
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software 4. In the Add New Menu Entry window, you can add the item by typing or by browsing: ❏ To add the item using the keyboard, type a name for the item in the Display Name field and type the path to the item in the File Name field. If you prefer to type the Display Name, but browse for the File Name, leave the File Name field blank. ❏ To add an item by browsing, select the Browse button next to the File Name field.
PAGE 133
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software 4. Select Modify. ❏ To change the Display Name or File Name of the item using the keyboard, type the new name for the item in the Display Name field or type the new path to the item in the File Name field. If you prefer to type the Display Name, but browse for the File Name, leave the File Name field blank. ❏ To change the Display Name or File Name by browsing, select the Browse button beside the File Name field.
PAGE 134
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Removing an Item from the Items to Display on Q Menu List System-defined items cannot be removed from the Items to Display on Q Menu List. To remove a user-defined item: 1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar). 2. Select Q Menu Settings. 3. Select the item you want to remove. 4. Select Remove. 5.
PAGE 135
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Using a System-Defined Item As shipped, the Q Menu displays only the items identified below as default. All the items described below can be added or removed from the Q Menu. For instructions, refer to “Setting Q Menu Preferences,” earlier in this chapter. Brightness (Default) Select Brightness to display a pop-up window that enables you to adjust screen brightness with the jog dial.
PAGE 136
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Capture Window Select Capture Window to copy the image of the currently active window on the tablet PC screen to the Windows clipboard. To save or print the image, open an application which supports a screen image, such as Microsoft Word or Microsoft Paint, then paste the image. For example, to copy the an image of the currently active window into a Word document: 1. Select Capture Window. 2. Open Word. 3.
PAGE 137
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software External Display When an optional display device, such as an external monitor or projector, is connected to the external monitor connector on the tablet PC: To display the image only on the display device: » Select External Display. ✎ Selecting External Display turns off the Extended Desktop option.
PAGE 138
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Presentation Mode On/Off (Default) Ä CAUTION: Presentation mode is integrated with the Q Menu software. If the Q Menu software is uninstalled or disabled, presentation mode will not function. Presentation mode is a desktop profile that provides the optimal configuration for displaying a presentation, such as a Microsoft PowerPoint presentation, on a projector or external monitor while displaying speaker’s notes on the tablet PC.
PAGE 139
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Portrait-Secondary To switch the image counterclockwise to portrait view from landscape view: » Select Portrait-Secondary. The default Portrait-Primary item switches the image clockwise to portrait view. Left-handed users may find the Portrait-Secondary item, which switches the image counterclockwise to portrait view, more convenient. recommends that you not use the Portrait-Secondary view ✎ HP while using the internal wireless.
PAGE 140
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Standby To initiate Standby: » Select Standby. Hibernate To initiate Hibernation if Hibernation is enabled: » Select Hibernate. ✎ Hibernation is enabled by default. If Hibernation is not enabled, selecting Hibernate initiates Standby. To verify that Hibernation is enabled: » Select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab.
PAGE 141
DRAFT Revised: 8/24/04 File: Chap7.fm PN: HP-367186-001 Q Menu Software Q Menu Settings (Default) To open the Q Menu Settings window: » Select Q Menu Settings. Tablet PC Button Driver The tablet PC button driver allows you to customize the pen-activated buttons and jog dial. You can program the buttons to perform various functions or open specific programs. Each button can be programmed to perform a different function for each orientation, or to perform the same function for all orientations.
PAGE 142
DRAFT Revised: 8/24/04 File: Chap7.
PAGE 143
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 8 Wireless If your tablet PC is equipped with an integrated wireless device such as 802.11 or Bluetooth wireless devices, you have a wireless tablet PC. ■ An 802.11 wireless tablet PC can connect to wireless networks in corporate offices, your home, and public places. Wireless networks include wireless local area networks (WLANs) or “hotspots.
PAGE 144
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Your tablet PC has a button that may be used to enable and disable the 802.11 and Bluetooth wireless devices and an associated light to indicate the state of the wireless devices. The following illustration shows the wireless button 1 and light 2. In addition to the wireless button and light, your tablet PC has software controls that enable you to turn on, turn off, enable, and disable your wireless devices.
PAGE 145
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Wireless Local Area Network (Select Models Only) With the 802.11 wireless device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories linked by a wireless router or a wireless access point.
PAGE 146
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless 802.11b and 802.11g. For information on identifying the type of device in your tablet PC, refer to the “Identifying a WLAN Device” section in this chapter. Connecting Your Wireless Tablet PC to a Corporate WLAN Contact your network administrator or IT department for information on connecting your tablet PC to your corporate WLAN.
PAGE 147
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Setting Up a WLAN in Your Home To set up a WLAN and connect to the Internet in your home, you need the following equipment. The illustration below shows an example of a completed wireless network installation that is connected to the Internet. This wireless network includes ■ An optional broadband modem (either DSL or cable) and high-speed Internet service purchased from an Internet service provider (ISP) 1.
PAGE 148
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Using a WLAN Connection To use a WLAN connection: ■ Verify that all drivers required by the 802.11 wireless device are installed and that the 802.11 wireless device is correctly configured. ✎ If you are using an integrated 802.11 wireless device, all required drivers are installed and the adapter is preconfigured and ready for use. ■ If you are using an integrated 802.11 wireless device, verify that the 802.
PAGE 149
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Using Wireless Security Features When you set up your own WLAN or access an existing WLAN, always ensure that security features are protecting the WLAN. If you do not enable security on your WLAN, an unauthorized wireless user can access your tablet PC data and use your Internet connection without your knowledge. The most common security levels are Wi-Fi Protected Access (WPA)-Personal and Wired Equivalent Privacy (WEP).
PAGE 150
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Identifying a WLAN Device To install HP WLAN software for an integrated 802.11 wireless device, you need to know the name of the integrated 802.11 wireless device on your tablet PC. To identify an integrated 802.11 wireless device: 1. Display the names of all the 802.11 wireless devices on your tablet PC: a. Select Start > My Computer. b. Right-click in the My Computer window. c.
PAGE 151
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless The WLAN software is also available as a SoftPaq at the HP Web site. To access, download, and install the SoftPaq, use either of the following procedures: ■ Select Start > Help and Support. -or- ■ Visit the HP Web site at http://www.hp.com/support: a. Choose your language and region. b. Select the Download Drivers and Software radio button c. Enter your computer model information, and then follow the instructions provided at the Web site.
PAGE 152
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Bluetooth (Select Models Only) The Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as ■ Network access points. ■ Computers (desktop, tablet PC, PDA). ■ Phones (cellular, cordless, smart phone). ■ Imaging devices (printer, camera). ■ Audio devices (headset, speakers).
PAGE 153
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless ■ Bluetooth serial port—Transfers data over the Bluetooth link using a virtual COM port. ■ Hands-Free—Enables a vehicle-embedded, hands-free unit or a tablet PC serving as a hands-free unit to establish a wireless connection to a cellular phone and to act as the Bluetooth cellular phone audio input and output mechanism. ■ Basic imaging—Provides a wireless connection between a Bluetooth-enabled camera and other Bluetooth devices.
PAGE 154
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Turning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth Devices The wireless button 1 enables and disables 802.11 wireless and Bluetooth devices in conjunction with Wireless Assistant. By default, the 802.11 wireless and Bluetooth devices and wireless light 2 are turned on when you turn on the tablet PC. on a wireless device does not automatically create a ✎ Turning WLAN or connect you to a WLAN.
PAGE 155
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless You can enable and disable the wireless devices in Computer Setup. For more information about using Computer Setup to control the 802.11 and Bluetooth wireless devices, refer to Chapter 11, “Computer Setup.” You can also enable and disable the wireless devices with the wireless button.
PAGE 156
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless Turning On the 802.11 Wireless and Bluetooth Devices If And ■ Wireless Assistant shows that both WLAN and Bluetooth are off ■ Wireless light is off You want to turn on either or both devices Then 1. Right-click the Wireless Assistant icon in the notification area. 2. Select the device or devices you want to turn on.
PAGE 157
DRAFT Revised: 8/24/04 File: Chap8.fm PN: HP-376186-001 Wireless want your wireless devices to be turned on when you turn ✎ Ifonyou your tablet PC, you must turn them on before you shut down or restart. Turning Off and Disabling the 802.
PAGE 158
DRAFT Revised: 8/24/04 File: Chap8.
PAGE 159
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 9 Security Security Features Quick Reference solutions are designed to act as deterrents. These ✎ Security deterrents may not prevent a product from being mishandled or stolen. In addition to the Windows operating system security measures, the tablet PC provides the following security features, most of which can be configured in Computer Setup. For more information, refer to Chapter 11, “Computer Setup” in this guide.
PAGE 160
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security To Protect Against Use This Security Feature Unauthorized access of data Windows Firewall software Unauthorized access to the BIOS settings and other system identification information HP administrator password, which protects the system information in Computer Setup.
PAGE 161
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Using Passwords Ä CAUTION: If you forget both your DriveLock user and DriveLock master passwords, the hard drive is permanently locked and can no longer be used. Most security features use passwords. Whenever you set a password, write down the password and store it in a secure location away from the tablet PC.
PAGE 162
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security HP and Windows Passwords HP security features and Windows operating system security features work independently from one another. For example, a device disabled in Computer Setup cannot be enabled in Windows. HP passwords and Windows passwords are also independent of one another. The following table lists the different passwords used by HP and Windows and describes their functions.
PAGE 163
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Windows Passwords Administrator password Used to log on to the tablet as the Windows administrator after Windows has been configured to prompt for a password at startup. User password Used to log on to the tablet PC as a user after Windows has been configured to prompt for a password at startup. HP and Windows Password Guidelines HP and Windows passwords are not interchangeable.
PAGE 164
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Using Power-On Passwords A power-on password prevents unauthorized use of the tablet PC. After it is set, a power-on password must be entered each time the tablet PC is turned on or restarted. A power-on password: ■ Does not display as it is set, entered, changed, or deleted. ■ Must be set and entered with the same keys.
PAGE 165
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security 3. To save your preferences, use the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen. Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts. Entering Power-On Passwords At the power-on password prompt, type your password, and then press enter. After 3 unsuccessful attempts to enter the password, you must restart the tablet PC and try again.
PAGE 166
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Using HP Administrator Passwords The HP administrator password protects the configuration settings and system identification information in Computer Setup. After it is set, this password must be entered to access Computer Setup. The HP administrator password ■ Is not interchangeable with a Windows administrator password, although both can use the same word or series of letters, or numbers.
PAGE 167
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security ❏ To change an HP administrator password, type your current password in the Old Password field, type the new password in the New Password and Verify New Password fields, and then press f10. ❏ To delete an HP administrator password, type your current password in the Old Password field, and then press f10. 3. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save Changes and Exit.
PAGE 168
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security DriveLock involves a user password and a master password: ■ A hard drive protected by DriveLock can be accessed with either the user password or the master password. ■ You can delete a user password or master password only by removing DriveLock protection from the drive. DriveLock protection can be removed from the drive only with the master password.
PAGE 169
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security To access the DriveLock settings in Computer Setup: 1. Shut down the tablet PC. If you are not sure whether the tablet PC is off or in Hibernation, turn the tablet PC on by pressing the power/standby switch to the left or right, and then shut down the tablet PC through the operating system. 2. Insert the hard drive into the tablet PC (not into an optional docking device or external MultiBay). 3.
PAGE 170
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Entering DriveLock Passwords 1. Be sure that the drive is inserted into the tablet PC (not an optional docking device or external MultiBay). 2. When prompted for a DriveLock password, type your user or master password (using the same type of keys you used to set the password), and then press enter. 3. After 2 incorrect attempts to enter the password, you must restart the tablet PC and try again.
PAGE 171
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Changing DriveLock Passwords Ä CAUTION: To prevent loss of work and damage to the tablet PC and the hard drive, shut down the tablet PC before inserting or removing a hard drive. (The hard drive is any hard drive used in the hard drive bay.) To access the DriveLock settings in Computer Setup: 1. Shut down the tablet PC.
PAGE 172
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Removing DriveLock Protection To access the DriveLock settings in Computer Setup: 1. Shut down the tablet PC. If you are not sure whether the tablet PC is off or in Hibernation, turn the tablet PC on by pressing the power/standby switch to the left or right, and then shut down the tablet PC through the operating system. 2. Be sure that the hard drive is inserted into the tablet PC (not into an optional docking device or external MultiBay).
PAGE 173
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Disabling a Device From the Computer Setup Device Security menu, you can disable or partially disable most ports and drives. 1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 2.
PAGE 174
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Setting System Information Options 1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 2. Access or set your preferences by following these directions: ❏ To view general system information, select the File menu > System Information.
PAGE 175
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security 2. Select the General tab. ❏ To learn more about Windows Firewall, select the Learn more about Windows Firewall link. ❏ To disable Windows Firewall, select Off (not recommended). ❏ To reenable Windows Firewall, select On (recommended). 3. Select OK. Under some circumstances a firewall can block access to Internet games, interfere with printer or file sharing on a network, or block authorized email attachments.
PAGE 176
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security To manually add an application to the Windows Firewall Exceptions list so that it will not be blocked by the firewall: 1. Select Start > Control Panel > Network and Internet Connections > Windows Firewall. 2. Select the Exceptions tab. 3. Select Add Program and enter the required information about the application. 4. Select OK. The application is added to the Exceptions list and will not be blocked by Windows Firewall.
PAGE 177
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security Connecting an Optional Security Cable ✎ Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. To install a security cable: 1. Loop the security cable around a secured object. 2. Insert the key 1 into the cable lock 2. 3. Insert the cable lock into the security cable slot 3, and lock the cable lock with the key.
PAGE 178
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security HP ProtectTools Security Manager (Select Models Only) Your tablet PC comes with HP ProtectTools Security Manager preinstalled. This software is accessed through Microsoft® Windows® Control Panel. It provides security features that are designed to help protect against unauthorized access to the tablet PC, networks, and critical data.
PAGE 179
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security ■ Settings configuration, including setting up enhanced Microsoft EFS and Personal Secure Drive for protecting user data. ■ Management functions, such as backing up and restoring the key hierarchy.
PAGE 180
DRAFT Revised: 8/24/04 File: Chap9.fm PN: HP-367186-001 Security ■ Configure boot options, which includes disabling the ability to boot to drives other than the primary hard drive. of the features in BIOS Configuration for ProtectTools ✎ Many are also available in Computer Setup. Refer to Chapter 11, “Computer Setup” for additional information. For more information, refer to the BIOS Configuration for ProtectTools online documentation.
PAGE 181
DRAFT Revised: 8/24/04 File: Chap10.fm PN: HP-367186-001 10 MultiBoot A bootable medium or network interface card (NIC) contains files that the tablet PC needs to start and operate properly. The MultiBoot utility, disabled by default, enables you to identify the devices and control the sequence in which the system attempts to boot from those devices as it starts up your tablet PC. Bootable devices include optical drive discs, such as CDs or DVDs, bootable diskettes, or NICs.
PAGE 182
DRAFT Revised: 8/24/04 File: Chap10.fm PN: HP-367186-001 MultiBoot optical drive device (such as a CD-ROM drive) can boot either ✎ An as drive A or drive C, depending on the format of the CD. Most bootable CDs boot as drive A. If you have a CD that boots as the C drive, the system will boot the diskette drive before it boots the CD. By default, the tablet PC selects the startup device by searching enabled devices and locations in a predetermined sequence.
PAGE 183
DRAFT Revised: 8/24/04 File: Chap10.fm PN: HP-367186-001 MultiBoot Enabling Bootable Devices in Computer Setup The tablet PC can start up from a USB device or the NIC only if that device has been enabled for inclusion in MultiBoot. To enable a device or location for inclusion in MultiBoot: 1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2.
PAGE 184
DRAFT Revised: 8/24/04 File: Chap10.fm PN: HP-367186-001 MultiBoot Understanding MultiBoot Results Before changing the startup sequence, consider the following: 10–4 ■ When the tablet PC restarts after the boot order has been changed, it considers only the first device of each drive type when searching for a startup device (except for optical devices). For example, the tablet PC is connected to an optional docking device containing an optical drive and a diskette drive.
PAGE 185
DRAFT Revised: 8/24/04 File: Chap10.fm PN: HP-367186-001 MultiBoot Setting MultiBoot Preferences There are two ways to set MultiBoot sequences: ■ Set a new default boot sequence that the tablet PC uses each time it starts up. ■ Use variable boot sequences using MultiBoot Express. This feature prompts you for a startup device each time the tablet PC is started or restarted.
PAGE 186
DRAFT Revised: 8/24/04 File: Chap10.fm PN: HP-367186-001 MultiBoot Setting a MultiBoot Express Prompt To set the tablet PC to display the MultiBoot startup location menu each time the tablet PC is started or restarted with Computer Setup: 1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 2.
PAGE 187
DRAFT Revised: 8/24/04 File: Chap10.fm PN: HP-367186-001 MultiBoot Entering MultiBoot Express Preferences When the Express Boot menu is displayed during startup: ■ To specify a startup location from the Express Boot menu, select your preference within the allotted time, and then press enter. ■ To prevent the tablet PC from defaulting to the current MultiBoot setting, press any key before the allotted time expires. The tablet PC will not start up until you select a startup location and press enter.
PAGE 188
DRAFT Revised: 8/24/04 File: Chap10.
PAGE 189
DRAFT Revised: 8/24/04 File: Chap11.fm PN: HP-367186-001 11 Computer Setup Using Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. If the operating system is working, the tablet PC restarts the operating system after you exit Computer Setup. devices are not supported in Computer Setup; you must ✎ Pointing use the keyboard to navigate and make selections.
PAGE 190
DRAFT Revised: 8/24/04 File: Chap11.fm PN: HP-367186-001 Computer Setup Accessing Computer Setup The information and settings in Computer Setup are accessed from the File, Security, Tools, and Advanced menus. 1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left of the screen. ❏ To change the language, press f2. ❏ To view navigation information, press f1. ❏ To return to the Computer Setup menu, press esc. 2.
PAGE 191
DRAFT Revised: 8/24/04 File: Chap11.fm PN: HP-367186-001 Computer Setup 4. To confirm the restoration, press f10. 5. Select File > Save changes and exit, and then follow the instructions on the screen. When the computer restarts, the factory settings are restored, and any identification information you may have entered is saved. Selecting from the File Menu Select To Do This ■ View identification information about System Information the tablet PC and any battery packs in the system.
PAGE 192
DRAFT Revised: 8/24/04 File: Chap11.fm PN: HP-367186-001 Computer Setup Selecting from the Security Menu . Select This Option To Do This Administrator password Enter, change, or delete an HP Administrator password. Power-On password Enter, change, or delete a power-on password. Password options ■ ■ DriveLock passwords DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the tablet PC. Enable/disable power-on support for smart cards.
PAGE 193
DRAFT Revised: 8/24/04 File: Chap11.fm PN: HP-367186-001 Computer Setup Select This Option To Do This ■ Enable/Disable the embedded Embedded Security security chip. ■ Restore embedded security chip to factory settings. ■ Enable/disable power-on authentication support. ■ ■ Enable/disable automatic DriveLock. ✎ Reset power-on authentication credential. Embedded Security settings are accessible only if the tablet PC is equipped with an embedded security chip.
PAGE 194
DRAFT Revised: 8/24/04 File: Chap11.fm PN: HP-367186-001 Computer Setup Selecting from the Tools Menu Select To Do This HDD Self Test options Run a quick or comprehensive self-test on any hard drive in the system. Battery Information View information about any battery packs in the tablet PC. Memory Check ■ Run a self-test on memory modules in the tablet PC. ■ View information about memory modules installed in the tablet PC.
PAGE 195
DRAFT Revised: 8/24/04 File: Chap11.fm PN: HP-367186-001 Computer Setup Select To Do This ■ Enable/disable num lock mode at Device options startup. ■ Enable/disable multiple standard pointing devices at startup. (To set the tablet PC to support only a single, usually nonstandard, pointing device at startup, select Disable.) ■ Select a parallel port mode: EPP (Enhanced Parallel Port), standard, bidirectional, or ECP (Enhanced Capabilities Port).
PAGE 196
DRAFT Revised: 8/24/04 File: Chap11.
PAGE 197
DRAFT Revised: 8/24/04 File: Chap12.fm PN: HP-367186-001 12 HP Client Management Solutions HP Client Management Solutions provides standards-based solutions for managing client (user) desktop, workstation, and tablet PCs in a networked environment. The key capabilities and features of client management are ■ Initial software image deployment. ■ Remote system software installation. ■ Software management and updates. ■ ROM updates.
PAGE 198
DRAFT Revised: 8/24/04 File: Chap12.fm PN: HP-367186-001 HP Client Management Solutions Configuration and Deployment HP computers come with a preinstalled system software image. The initial software image is configured during the first-time setup of the computer. After a brief software “unbundling” occurs, the computer is ready to be used. A customized software image can be deployed (distributed) by ■ Installing additional software applications after unbundling the preinstalled software image.
PAGE 199
DRAFT Revised: 8/24/04 File: Chap12.fm PN: HP-367186-001 HP Client Management Solutions ■ Web-accessible reporting of business-critical details, such as machines with thermal warnings and memory alerts. ■ Remote updating of system software such as device drivers and ROM BIOS. functionality can be added when HP CMS is used with ✎ Additional optional Altiris Solutions software (purchased separately). For more information on HP Client Manager, visit the HP Web site at http://www.hp.com/go/easydeploy.
PAGE 200
DRAFT Revised: 8/24/04 File: Chap12.
PAGE 201
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 13 Software Update and Recoveries Preparing to Update Software For optimal tablet PC performance and to make sure your tablet PC remains compatible with changing technologies, HP recommends that you install the latest versions of HP software as they become available. To update HP software: 1. Prepare for any update by identifying your tablet PC type, series or family, and model; refer to “Accessing Tablet PC Information” later in this chapter.
PAGE 202
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries Obtaining the Support Software CD The Support Software CD provides HP software updates and installation instructions. The CD includes device drivers, ROM updates, and utilities. To purchase the current Support Software CD or a subscription that provides both the current version and future versions of the CD, visit the HP Web site at http://www.hp.com.
PAGE 203
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries To display ROM information in Computer Setup: 1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 2. Select File > System Information. The system ROM information is displayed. 3.
PAGE 204
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries Downloading System ROM Ä CAUTION: To prevent an unsuccessful installation, download and install the system ROM only while the tablet PC is connected to reliable external power using the AC adapter. Do not download or install the system ROM while the tablet PC is running on battery power, docked in an optional port replicator, or connected to an optional power source.
PAGE 205
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries Downloading Other Software To download and install other software: 1. Access the page at the HP Web site that provides software for your tablet PC. 2. Follow the instructions on the screen to find the software you want to update. 3. At the download area, select the software you want and follow the downloading instructions on the Web page. 4. When the download is complete, open Windows Explorer. 5.
PAGE 206
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries Safeguarding Your Data Software or devices added to the tablet PC can cause your system to become unstable. To safeguard your documents, store personal files in the My Documents folder and periodically create a backup copy of My Documents.
PAGE 207
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries Repairing the Operating System To attempt an operating system repair without deleting your personal data, use the Operating System disc that was shipped with the tablet PC: 1. Connect the tablet PC to external power and turn on the tablet PC. 2. Immediately insert the Operating System disc into the tablet PC. 3. Press and hold the power button for 5 seconds to turn off the tablet PC. 4.
PAGE 208
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries To reinstall the operating system: 1. Connect the tablet PC to external power and turn on the tablet PC. 2. Immediately insert the Operating System disc into the tablet PC. 3. Press and hold the power button for 5 seconds to turn off the tablet PC. 4. Press the power button again to start the tablet PC. 5. When prompted, press any key to boot from the disc. After a few minutes, the Welcome to Setup screen is displayed.
PAGE 209
DRAFT Revised: 8/24/04 File: Chap13.fm PN: HP-367186-001 Software Update and Recoveries Reinstalling Device Drivers and Other Software After the operating system installation process is complete, you must reinstall drivers. To reinstall drivers, use the Driver Recovery disc included with the tablet PC: 1. While running Windows, insert the Driver Recovery disc into the optical drive. If you do not have Autorun enabled, select Start > Run. Then type D:\SWSETUP\APPINSTL\SETUP.
PAGE 210
DRAFT Revised: 8/24/04 File: Chap13.
PAGE 211
DRAFT Revised: 8/24/04 File: Chap14.fm PN: HP-367186-001 14 Specifications Operating Environment The operating environment information in the following table might be helpful if you plan to use or transport the tablet in extreme environments. Factor Metric U.S.
PAGE 212
DRAFT Revised: 8/24/04 File: Chap14.fm PN: HP-367186-001 Specifications Rated Input Power The power information in this section might be helpful if you plan to travel internationally with the tablet PC. The tablet PC operates on DC power, which can be supplied by an AC or a DC power source. Although the tablet PC can be powered from a stand-alone DC power source, it is strongly recommended that the tablet PC be powered only with an AC adapter or DC power cord supplied or approved by HP.
PAGE 213
DRAFT Revised: 8/24/04 File: 367426-001IX.fm PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number Index A AC adapter connecting 2–27 disconnecting 2–15 AC power 2–15 accessing notebook information 11–2 adapter, modem 6–27 adjusting the volume 5–3 Aircraft Power Adapter connecting 2–27 airport security devices 6–2 altitude specifications 11–1 ambient light sensor 3–18 analog vs. digital line 6–25 applications.
PAGE 214
DRAFT Revised: 8/24/04 File: 367426-001IX.
PAGE 215
DRAFT Revised: 8/24/04 File: 367426-001IX.fm PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number Index See also cables country-specific modem cable adapter 6–27 CPQFlash file 11–3 critical low-battery condition identifying 2–26 restoring from 2–27 ctrl+alt+delete command 4–9 D Desktop Video Profiles 7–16 device disabling 9–15 device drivers external devices 6–33 PC Card 6–9 dial, jog described 4–10 identified 4–6 digital vs. analog line 6–25 disc, optical.
PAGE 216
DRAFT Revised: 8/24/04 File: 367426-001IX.fm PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number Index Fn, specific functions of on on-screen keyboard 4–14 freeze, system 4–9 function keys (F1, F2, etc.
PAGE 217
DRAFT Revised: 8/24/04 File: 367426-001IX.
PAGE 218
DRAFT Revised: 8/24/04 File: 367426-001IX.fm PN: CPQ-CPQ Part Number HP-367186-001 U-Unbranded Part Number Index mouse, external setting preferences for 4–1 supported 4–1 MultiBay II external 6–34 Mute On/Off item on Q Menu 7–9 N network connecting 6–29 noise suppression circuitry 6–28 num lock key 3–10 light 3–10 number keys, on on-screen keyboard 4–14 numeric keypad 3–10 numeric keypad.
PAGE 219
DRAFT Revised: 8/24/04 File: 367426-001IX.
PAGE 220
DRAFT Revised: 8/24/04 File: 367426-001IX.
PAGE 221
DRAFT Revised: 8/24/04 File: 367426-001IX.
PAGE 222
DRAFT Revised: 8/24/04 File: 367426-001IX.
PAGE 223
DRAFT Revised: 8/24/04 File: 367426-001IX.
PAGE 224
DRAFT Revised: 8/24/04 File: 367426-001IX.