User's Guide

ManualsBrandsBroadcom ManualsComputers & Accessories802.11g Mini PCI card co-located with Bluetooth

Table Of Contents

Bluetooth Getting Started Guide

The Bluetooth integrated device provided with your notebook

comes with the required software preloaded. However, before

you can use your local Bluetooth device, the software must be

installed and configured. The Software Setup application

included with your notebook will assist you in installing the

Bluetooth software. After the software has been installed,

the Bluetooth Setup Wizard can be used to facilitate the

configuration of service and security features of your wireless

product. During the initial configuration, you can also locate

other devices that provide a particular service and configure

access to those services.

Software Installation

If your notebook is equipped with the Bluetooth integrated

device, you must install the Bluetooth software that has been

preloaded in the image of your notebook. To install the software

for your Bluetooth device, perform the following steps:

1. Select Start > All Programs > Software Setup.

2. The Software Setup Welcome window appears; select Next.

3. Select the check box next to the Bluetooth software driver to

enable the software for installation and select Next.

4. Select Finish to complete the installation and to reboot the

computer.

✎

A software item that is enabled to install via Software Setup will

have a check mark in the check box next to it. Deselect all items

that you do not want to install before selecting Next to continue

with installation of the Bluetooth software.

Proceed to the “Hardware Enabling” section.

330854-002.fm Page 1 Wednesday, April 2, 2003 3:45 PM

Summary of content (8 pages)

PAGE 1
330854-002.fm Page 1 Wednesday, April 2, 2003 3:45 PM Bluetooth Getting Started Guide The Bluetooth integrated device provided with your notebook comes with the required software preloaded. However, before you can use your local Bluetooth device, the software must be installed and configured. The Software Setup application included with your notebook will assist you in installing the Bluetooth software.
PAGE 2
330854-002.fm Page 2 Wednesday, April 2, 2003 3:45 PM Hardware Enabling Before beginning the configuration of your Bluetooth software and drivers, verify that the blue LED on the notebook is illuminated. Refer to your notebook docomentation for the location of the LED. If the LED is not illuminated, press the Wireless on/off button to turn on the Bluetooth device. Refer to your notebook documentation for the location of the wireless on/off button.
PAGE 3
30854-002.fm Page 3 Wednesday, April 2, 2003 3:45 PM First Time Software Use Select the Bluetooth icon on the desktop or taskbar to begin setting up Bluetooth software. 1. Right-click the Bluetooth icon and select Start Using Bluetooth. The Bluetooth Setup Wizard appears, and you will see these options: ❏ Add the icon to the Start menu, or ❏ Add the icon to the Program menu, or ❏ Add the icon to My Computer 2. Select Next to continue. 3. Change the Computer Name (your designation) and Computer Type.
PAGE 4
330854-002.fm Page 4 Wednesday, April 2, 2003 3:45 PM Bluetooth Service Selections Bluetooth Service Selections is a list of your notebook’s wireless default settings. 1. Select each service individually and select Configure. ✎ As you highlight a service by selecting it with a mouse or cursor, the configure button will appear to allow you to configure the service. Select Next after you have configured all services you have elected to modify.
PAGE 5
330854-002.
PAGE 6
330854-002.fm Page 6 Wednesday, April 2, 2003 3:45 PM ❏ Dial-up Networking ◆ Startup Automatically: disabled ◆ Secure Connection: enabled ◆ Modems: defaults to installed modem ◆ Notifications: Visual and Audio ✎ ❏ The first time the Dial-up Networking service is used after discovering a device and Connecting to the DUN service, a dialog is displayed: Please wait while Windows installs software for your device.
PAGE 7
330854-002.fm Page 7 Wednesday, April 2, 2003 3:45 PM To Reconfigure Bluetooth To reconfigure your Bluetooth device, select the Bluetooth Setup Wizard from any of the Bluetooth icons or menu items. You will see 4 options to reconfigure or modify how you interoperate with other devices.
PAGE 8
330854-002.fm Page 8 Wednesday, April 2, 2003 3:45 PM © 2003 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. HP shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.