Spec Sheet

ManualsBrandsBRK ManualsFurnacesP1210 - Smoke Alarm with Sealed Battery - Battery Powered

SMOKE

ALARM

CAT.

PR710B

LOW PROFILE DESIGN

Sleek, contemporary design blends into

any décor.

10-YEAR

LITHIUM POWER

10 years of continuous protection.

No battery change required. Provides

audible notice when alarm has reached

its end of life.

TAMPERPROOF

SEALED ALARM

Powercell cannot be removed.

PHOTOELECTRIC

Photoelectric technology is generally

more sensitive at detecting large par-

ticles, which tend to be produced in

greater amounts by smoldering ﬁres.

SILENCE FEATURE

Silences nuisance alarms.

TAMPER RESISTANT

Locks alarm to mounting bracket.

Perfect for apartment, dormitory or

hotel applications.

Description:

BRK PR710B (model P1210) is a 3V lithium power cell single station smoke alarm

speciﬁcally designed for residential and institutional applications including sleep-

ing rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings

as deﬁned in standard NFPA 101. BRK PR710B has been fully tested and complies

with, UL217, CSFM, NFPA 72, and NFPA 101 and other agencies that model their

codes after the above agencies. It meets building codes where tamperproof 10-

year sealed lithium battery operated smoke alarms are required and with model

building codes published by the ICC.

BRK PR710B is a state of the art smoke alarm designed to provide early warning of

a ﬁre. It features a fully insect screened Photoelectric smoke sensing chamber, an

85dB horn, a sealed 10-year lithium power cell power supply that is permanently

installed, a full function test switch, a silence feature to silence unwanted nuisance

alarms, a red LED light that indicates DC power or alarm. The tamperproof design

will not allow the powercell to be removed. The low power warning indicator will

cause the alarm to “chirp” when it reaches the end of its service life and needs

to be replaced. Upon end of life, the unit meets UL requirements for disabling the

alarm and non-reinstallation of unit to mounting bracket. It also features a tamper

resistant locking pin that locks alarm to the mounting bracket to prevent removal

of alarm. Perfect for apartment, dormitory or hotel applications. The sleek, low pro-

ﬁle design complements any décor. Designed for wall or ceiling mounting. Includes

mounting anchors

and screws.

Sealed 3V Lithium Power Cell

Listed to

Standard

UL 217

10-YEAR SEALED

Summary of content (2 pages)

PAGE 1
SMOKE A LARM 1 0 -Y E A R S E A L E D CAT. PR710B Sealed 3V Lithium Power Cell Description: LOW PROFILE DESIGN Sleek, contemporary design blends into any décor. 10-YEAR LITHIUM POWER 10 years of continuous protection. No battery change required. Provides audible notice when alarm has reached its end of life. TAMPERPROOF SEALED ALARM Powercell cannot be removed.
PAGE 2
CAT. PR710B TOP VIEW TECHNICAL SPECS MOUNTING BRACKET SIDE VIEW 5.2” 1.13” ARCHITECTURAL AND ENGINEERING SPEC The smoke alarm shall be a BRK Model P1210 (cat. no. PR710B) and shall provide at a minimum the following features and functions: 1. A photoelectric smoke sensing chamber. 2. The unit shall be capable of self restoring. 3. A fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms. 4.