RFID Multifunction System Operation Manual Ver 1.0 Version BR-RW-0005 Manufacturer and publisher Brillian Network & Automation Integrated System Co.,Ltd Add: No.41, Keyi St., Zhunan Township, Miaoli County 350, Taiwan, R.O.C. Tel: 886-37-580708 Fax: 886-37-580728 Email:services@brillian.com.tw Website:http://www.brillian.com.
Contents 1 2 3 4 5 6 7 8 Brief introduction of equipment ................................................................................................ - 1 Description of safety rule of BR-RW-0005 ................................................................................ - 2 Description of starting steps ..................................................................................................... - 3 Description of stopping steps .............................................................
1 Brief introduction of equipment Brillian Material Handling Solution(BMHS) We provide a FAB semi-automatic material handling solution. Through a material storage devices, integrating the BMHS system and database, product locations and determine the transmission route, optimal throughput and increase productivity. eRack management collects all eRack status information, exchanges information on behalf of all eRacks and MES. Provides admin search queries, work order inquiries, statistical analysis, etc.
2 Description of safety rule of BR-RW-0005 2.1 Instruction for use。 2.1.1 This manual is only written for Purge System Module。 2.1.2 Non-qualified or non-professional personnel are not allowed to operate or maintain the machine。 2.1.3 “Operator” should read carefully the software operation in advance。 2.1.4 “Maintainer”, in addition to getting familiar with software operation, should read carefully the maintenance manual and circuit diagram。 2.1.
3 Description of starting steps 3.1 Alkaline battery*2 3.2 Open Power Button 4 Description of stopping steps 4.1 Close Power Button 4.2 Remove Alkaline battery*2 5 Facility Requirement&SPEC RFID Multifunction System Model Type BR-RW-0005 Rating(Adapter) Alkaline battery*2 Length X Width X Height(mm) 134 X 38 X 160 Weight kg Frequency 134.2KHz 6 Product Name FCC Rules This device complies with Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
BR-RW-0005 Module Illustration Front-1 -5- Brillian Network & Automation Integrated System Co., Ltd.
Operation Description Put a POD fixed on the goods which you need to get goods information. The Transponder has a data record for the good During the Host computer sent a order message to the CIDRW through RS232 or HSMS The CIDRW will sent back the goods information which read from the Transponder by radio frequency. -6- Brillian Network & Automation Integrated System Co., Ltd.